Deleted
Joined on: Apr 25, 2024 4:56:59 GMT -5
Posts: 0
|
Post by Deleted on Aug 22, 2014 0:03:57 GMT -5
 Please move this if this is in the wrong place but I bought this rey mysterio from a local goodwill for about $1 and I noticed the arm was missing and I wanted to know if their is anyway to replace it with a different mysterio arm ? |
|
|
|
Post by rustyy on Aug 22, 2014 0:05:47 GMT -5
Pop the top torso, get a new shoulder and put the other arm back on if you can get the nub out. If not then buy a new one
Rey Mysterious lol
|
|
Deleted
Joined on: Apr 25, 2024 4:56:59 GMT -5
Posts: 0
|
Post by Deleted on Aug 22, 2014 0:21:19 GMT -5
Pop the top torso, get a new shoulder and put the other arm back on if you can get the nub out. If not then buy a new one Rey Mysterious lol Is their anyone here that can pop the top torso? |
|
|
|
Post by rustyy on Aug 22, 2014 0:23:11 GMT -5
Pop the top torso, get a new shoulder and put the other arm back on if you can get the nub out. If not then buy a new one Rey Mysterious lol Is their anyone here that can pop the top torso? Lots of people, if you want to try it yourself the first page of the fix up thread here has a guide, as does the custom support center. All you need is hot water, knife and screwdriver. |
|
Deleted
Joined on: Apr 25, 2024 4:56:59 GMT -5
Posts: 0
|
Post by Deleted on Aug 22, 2014 0:24:51 GMT -5
Thanks. I'm just afraid im going to break it
|
|
|
|
Post by Old School Collector on Aug 22, 2014 0:27:52 GMT -5
Its already broke ..
|
|
Deleted
Joined on: Apr 25, 2024 4:56:59 GMT -5
Posts: 0
|
Post by Deleted on Aug 22, 2014 0:35:28 GMT -5
I'd just salvage it for parts imo.
|
|
|
|
Post by skribbel24 on Aug 22, 2014 0:48:12 GMT -5
I'd just salvage it for parts imo. That's what I would do. |
|
RV F'N D
Main Eventer
Joined on: Mar 13, 2012 21:34:37 GMT -5
Posts: 4,046
|
Post by RV F'N D on Aug 22, 2014 5:59:12 GMT -5
It actually is not that hard to do. Follow Apoc's guide in the fixup thread and you'll be fine. Maybe practice on a different fig that you don't care about as much. Good luck.
|
|
|
|
Post by PJ on Aug 22, 2014 6:21:11 GMT -5
If you don't want to crack the torso you could cut missing part the stem off another figure's shoulder then the with a small pin/piece of wire stick it halfway into the center of the broken stem with a little crazy glue on the end of the pin/wire that that you stick into the stem. Then put some crazy glue on the other end of the pin/wire and push the replacement stem piece over that to complete a new shoulder stem. Once it dries pop the arm back on and it'll be good as new. I did that with a DCSH/DCUC Steel figure as well as a Green Lantern.
|
|
|
|
Post by JC Motors on Aug 22, 2014 9:16:07 GMT -5
That sucks, that's the TRU exclusive Avatar Rey
|
|
