|
Post by PJ on Jul 28, 2017 13:43:57 GMT -5
Looking for some suggestions on a specific part choice. If I wanted to remove Bash at the Beach Sting's left leg (the one with the STINGER down the side) and replace it with another plain black left leg with no acetone required, what figure would I be looking for? The Nasty Boys legs aren't the same mold/match and I'm not sure if DDPs legs are larger. Any ideas? I don't have that Sting figure in front of me right now so I don't even know if it has ball joint or ratchet hips. It is the old style hips. I can't think of anyone with the same legs that have no paint on them.
|
|
Deleted
Joined on: May 25, 2024 9:14:54 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2017 15:02:34 GMT -5
Are we allowed to post other people's work now? Was always under the impression that we couldn't.
|
|
RKOrton
Mid-Carder
Joined on: Mar 12, 2017 10:35:34 GMT -5
Posts: 371
|
Post by RKOrton on Jul 28, 2017 15:44:52 GMT -5
Are we allowed to post other people's work now? Was always under the impression that we couldn't. oh sry, I didn't know about that. I edited my comment.
|
|
Deleted
Joined on: May 25, 2024 9:14:54 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2017 15:45:46 GMT -5
Are we allowed to post other people's work now? Was always under the impression that we couldn't. oh sry, I didn't know about that. I edited my comment. Oh, it was an honest question. No idea and far too lazy to read the rules again. Haha
|
|
|
Post by joes7164 on Jul 28, 2017 16:45:23 GMT -5
Use clear fingernail polish and wipe off with a towel or similiar. I tried this after others suggested. It works great and doesn't eat into the plastic. That way you don't have to look for other parts.
|
|
|
Post by Nivro™ on Jul 28, 2017 18:12:29 GMT -5
Looking for some suggestions on a specific part choice. If I wanted to remove Bash at the Beach Sting's left leg (the one with the STINGER down the side) and replace it with another plain black left leg with no acetone required, what figure would I be looking for? The Nasty Boys legs aren't the same mold/match and I'm not sure if DDPs legs are larger. Any ideas? I don't have that Sting figure in front of me right now so I don't even know if it has ball joint or ratchet hips. Why not just paint it? Black is by far the easiest to paint/seal.
|
|
|
Post by Bandalero on Jul 28, 2017 19:48:40 GMT -5
Looking for some suggestions on a specific part choice. If I wanted to remove Bash at the Beach Sting's left leg (the one with the STINGER down the side) and replace it with another plain black left leg with no acetone required, what figure would I be looking for? The Nasty Boys legs aren't the same mold/match and I'm not sure if DDPs legs are larger. Any ideas? I don't have that Sting figure in front of me right now so I don't even know if it has ball joint or ratchet hips. Why not just paint it? Black is by far the easiest to paint/seal. Oh that's true, that's damn true! Hoping for yellow boots at some point for Starcade '89 Sting
|
|
bojoro
Mid-Carder
Joined on: Nov 13, 2008 0:54:13 GMT -5
Posts: 401
|
Post by bojoro on Jul 28, 2017 20:24:32 GMT -5
Why not just paint it? Black is by far the easiest to paint/seal. Oh that's true, that's damn true! Hoping for yellow boots at some point for Starcade '89 Sting Elite Del Rio?
|
|
|
Post by BestLookingInTheWorld on Jul 28, 2017 22:51:53 GMT -5
Just a couple of more Balor fixups 🤘🏼🤘🏼
|
|
Hal7300
Jobber
Joined on: Mar 27, 2013 10:48:21 GMT -5
Posts: 34
|
Post by Hal7300 on Jul 29, 2017 0:21:53 GMT -5
Hoping for yellow boots at some point for Starcade '89 Sting Hands down my favourite surfer Sting attire! Good luck with the face-paint 😉
|
|
|
Post by Joe/Smurf on Jul 29, 2017 11:25:41 GMT -5
never mind, you can delete this comment you can delete your own posts if you hit the little gear up in the right-hand corner /\
|
|
MickeyMalice
Mid-Carder
We're so lame.
Joined on: May 19, 2016 17:06:45 GMT -5
Posts: 365
|
Post by MickeyMalice on Jul 30, 2017 12:02:05 GMT -5
Hey everyone,
I'm having a problem switching the arm pegs on my WM 32 Heritage Elite Roman Reigns. I can only get the peg through one side of the forearm.
How do I solve this?
Thanks.
|
|
deepfreeze
Main Eventer
Deepfreeze-Customs
Joined on: Jul 30, 2007 10:59:38 GMT -5
Posts: 1,545
|
Post by deepfreeze on Jul 30, 2017 12:04:28 GMT -5
|
|
RV F'N D
Main Eventer
Joined on: Mar 13, 2012 21:34:37 GMT -5
Posts: 4,046
|
Post by RV F'N D on Jul 30, 2017 12:08:07 GMT -5
Hey everyone, I'm having a problem switching the arm pegs on my WM 32 Heritage Elite Roman Reigns. I can only get the peg through one side of the forearm. How do I solve this? Thanks. Heat up the arm in some hot water to soften it, make sure the peg is lined up on the holes, wrap a rag on both sides to protect the plastic from the pliers you will use to gently squeeze it through.
|
|
|
Post by l on Jul 30, 2017 13:48:59 GMT -5
Hey everyone, I'm having a problem switching the arm pegs on my WM 32 Heritage Elite Roman Reigns. I can only get the peg through one side of the forearm. How do I solve this? Thanks. Heat up the arm in some hot water to soften it, make sure the peg is lined up on the holes, wrap a rag on both sides to protect the plastic from the pliers you will use to gently squeeze it through. This is how I do it. I usually old t-shirts as rags so sometimes you may have to fold your rag so that its doubled up so that it wont leave marks. Sometimes, I have even used a small drill bit to slightly clean out the holes if they look a bit rough. You should take care to use a pretty small one.... I can't recall the size, but if you need to clean it up just a hair it works and I've never had loose joints because of it. I used this when I had to straighten out the legs on the 4-horsemen pack. No matter how many times I boiled and straightened, their legs just went right back to crooked-ville. Then I looked and cleaned them out and they worked perfectly afterwards.
|
|
Deleted
Joined on: May 25, 2024 9:14:54 GMT -5
Posts: 0
|
Post by Deleted on Jul 30, 2017 14:37:10 GMT -5
Does the head from the 1st series TNF Undertaker basic skintone match up with the summerslam basic skintone? I want to do a head swap but worried the head will be too pale for the summerslam body?
|
|
|
Post by l on Jul 30, 2017 15:19:17 GMT -5
Tried to search... has anyone swapped the HOF Edge torso with the Arn torso?
|
|
thechoad
Superstar
Joined on: Dec 22, 2016 5:29:01 GMT -5
Posts: 506
|
Post by thechoad on Jul 31, 2017 6:02:01 GMT -5
Finished my revival elites got more pics in the customs thread:)
|
|
|
Post by ~ Cymru ~ on Jul 31, 2017 12:00:56 GMT -5
Has anyone converted the Hollywood Hogan figure to Mattel? I figured someone would have posted it by now, if it was even possible.
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Jul 31, 2017 13:39:02 GMT -5
|
|