|
Post by BcBlingin- Scooter Glenwood on Jan 24, 2008 1:41:56 GMT -5
So far looks pretty good. Get some light and color on it and it should be pretty sweet. I am actually working out plans to build a RAW stage. I am going to invest about $500-$700 to build a realscale version of it. Been doing some drawings and looking at different LED lights to build the stage.
|
|
|
Post by The Dude on Jan 24, 2008 8:42:34 GMT -5
Looks really good so far, can't wait to see the finished product
|
|
|
Post by inrogers29 on Jan 24, 2008 8:46:54 GMT -5
Looks pretty good so far, cant wait to see the finished product.
|
|
Deleted
Joined on: Sept 23, 2024 22:27:28 GMT -5
Posts: 0
|
Post by Deleted on Jan 24, 2008 14:23:39 GMT -5
Love your work. Looks good already.
|
|
|
Post by DgenerationX092 on Jan 24, 2008 18:21:55 GMT -5
i have to point out the wrongs, just to help you make a perfect stage.
im just going off memory, but if im right, the actual screen, where they play videos, is more to the right and not directly above the ramp.
same goes for the tunnel. again, if i remember right, the tunnel isnt directly behind the ramp.
but other than that its looking Grade A! i love the WWE logo cutout cant wait to see the whole thing done.
as for the interchangeable logos, i bet it can be pulled off using magnets. so its just a 1, 2, 3 thing. take off the raw magnet, slap on the smackdown magnet.
|
|
|
Post by kanekilledvince on Jan 24, 2008 18:35:12 GMT -5
So far looks pretty good. Get some light and color on it and it should be pretty sweet. I am actually working out plans to build a RAW stage. I am going to invest about $500-$700 to build a realscale version of it. Been doing some drawings and looking at different LED lights to build the stage. That would truly be a waste of money.
|
|
|
Post by alex123ecw on Jan 24, 2008 18:37:26 GMT -5
So far looks pretty good. Get some light and color on it and it should be pretty sweet. I am actually working out plans to build a RAW stage. I am going to invest about $500-$700 to build a realscale version of it. Been doing some drawings and looking at different LED lights to build the stage. That would truly be a waste of money. Yeah 500$ on a figure stage would be dumb.
|
|
|
Post by BcBlingin- Scooter Glenwood on Jan 24, 2008 22:41:13 GMT -5
That would truly be a waste of money. Yeah 500$ on a figure stage would be dumb. They are fun to buld every now and then. After I set it up and feel accomplished I will just resell everything... Let me do what I want to do.
|
|
|
Post by kanekilledvince on Jan 24, 2008 22:50:49 GMT -5
Yeah 500$ on a figure stage would be dumb. They are fun to buld every now and then. After I set it up and feel accomplished I will just resell everything... Let me do what I want to do. Don't get me wrong man, Im all for doing what you want (hell, i bought a Kane outfit) but i just think that after you've spent the money on the stage, whilst it will no doubt look amazing (well.. for $500 it better look amazing) i think it'd be a very regretful thing. And your plans for selling it would go badly, because very few people in the world would pay that kinda money for a figure stage, plus shipping would be expensive, meaning that you'd be hoping on a very limited amount of people to want it. And even then, they might not want to pay that much, which means you could end up selling it for less (albeit begrudgingly) or keeping a stage that you wish you could just sell. I'm just offering advice man. For that kinda money, you could rig up an entire figure arena with strobe lights, a pc monitor titantron, a small crowd, etc. instead of just having one kick ass titantron. Like i say man, its truly your choice.. but its definitely something you need to think long and hard about.
|
|
brucebenoit
Main Eventer
I'm not driven by fear I'm driven by anger
Joined on: Jul 8, 2007 13:37:23 GMT -5
Posts: 3,697
|
Post by brucebenoit on Jan 24, 2008 23:07:08 GMT -5
wow man it looks tops
|
|
Tim Sorenson
Main Eventer
Joined on: Mar 2, 2005 17:10:18 GMT -5
Posts: 4,521
|
Post by Tim Sorenson on Jan 24, 2008 23:56:15 GMT -5
The ramp is actually smaller than my previous Raw stage, and is not as high - like Raw. Thanks for the comments: its still very early but is coming along. I ment not as long, As how the New sets have shorter ramps.
|
|
|
Post by BcBlingin- Scooter Glenwood on Jan 25, 2008 1:44:50 GMT -5
They are fun to buld every now and then. After I set it up and feel accomplished I will just resell everything... Let me do what I want to do. Don't get me wrong man, Im all for doing what you want (hell, i bought a Kane outfit) but i just think that after you've spent the money on the stage, whilst it will no doubt look amazing (well.. for $500 it better look amazing) i think it'd be a very regretful thing. And your plans for selling it would go badly, because very few people in the world would pay that kinda money for a figure stage, plus shipping would be expensive, meaning that you'd be hoping on a very limited amount of people to want it. And even then, they might not want to pay that much, which means you could end up selling it for less (albeit begrudgingly) or keeping a stage that you wish you could just sell. I'm just offering advice man. For that kinda money, you could rig up an entire figure arena with strobe lights, a pc monitor titantron, a small crowd, etc. instead of just having one kick ass titantron. Like i say man, its truly your choice.. but its definitely something you need to think long and hard about. I understand.. and what I mean by reselling is not selling the stage but selling all the lights I am buying. I got the extra cash and I just found some nice led lights that dont run as much as I thought they would. I think the thing that will cost the most is this piece that I am going to have custom made to RAW colors. It will be the round piece that is on the new stage.
|
|
|
Post by MichaelTheMartian on Jan 25, 2008 5:35:39 GMT -5
WOW that is cool man, its fantastic!! well done, even if you left it like this, it still would have been awseome, good job dude.
|
|
UFW.222
Main Eventer
12 refs and counting!!!
Joined on: May 15, 2007 10:04:24 GMT -5
Posts: 1,519
|
Post by UFW.222 on Jan 25, 2008 8:16:52 GMT -5
Amazing so far can't wait to see the final look!!!
|
|
Here Comes The Pain
Mid-Carder
Here Comes The Pain
Joined on: Mar 7, 2007 14:44:06 GMT -5
Posts: 305
|
Post by Here Comes The Pain on Jan 25, 2008 15:22:19 GMT -5
|
|
|
Post by kanekilledvince on Jan 25, 2008 17:52:19 GMT -5
Don't get me wrong man, Im all for doing what you want (hell, i bought a Kane outfit) but i just think that after you've spent the money on the stage, whilst it will no doubt look amazing (well.. for $500 it better look amazing) i think it'd be a very regretful thing. And your plans for selling it would go badly, because very few people in the world would pay that kinda money for a figure stage, plus shipping would be expensive, meaning that you'd be hoping on a very limited amount of people to want it. And even then, they might not want to pay that much, which means you could end up selling it for less (albeit begrudgingly) or keeping a stage that you wish you could just sell. I'm just offering advice man. For that kinda money, you could rig up an entire figure arena with strobe lights, a pc monitor titantron, a small crowd, etc. instead of just having one kick ass titantron. Like i say man, its truly your choice.. but its definitely something you need to think long and hard about. I understand.. and what I mean by reselling is not selling the stage but selling all the lights I am buying. I got the extra cash and I just found some nice led lights that dont run as much as I thought they would. I think the thing that will cost the most is this piece that I am going to have custom made to RAW colors. It will be the round piece that is on the new stage. How much will that set you back? I'd imagine it'll be a few $$, but i wouldn't be too sure. You could get something like this, too, and have a few strips of them lying vertically to create a similar effect to the area ever so slightly to the right of the LED tube Ive been wanting to make a fully functional RAW titantron for awhile (not the current one, the previous one that they just got rid of) but I think it would be a huge hassle, as i'd need four screens, three of which have to be tiny, and two of those have to be wide screen. But i wouldn't even know where to start in order to make one.
|
|
B.D. & El G.
Main Eventer
RIP SNS 2/15/82 - 4/11/11
Joined on: Jan 2, 2008 17:52:29 GMT -5
Posts: 4,113
|
Post by B.D. & El G. on Jan 25, 2008 19:38:50 GMT -5
|
|
|
Post by recklessmatten on Jan 26, 2008 8:39:12 GMT -5
I think this is amazing.
A good way to do it so you don't have to make more the one, is where the parts a coloured, put a clear film over it, and have paper or card that you can slot into place, makes it interchangable
|
|
|
Post by animan on Jan 26, 2008 13:07:13 GMT -5
yes i can do the graphics to your spec just get me the images you want
|
|
|
Post by instant classic on Jan 27, 2008 0:32:35 GMT -5
Its good not bad
|
|