|
|
Post by Affliction: Elite Trader on Jun 4, 2015 9:15:34 GMT -5
Anyone have any ideas for a Joel Gertner head? I'm thinking a repainted Jakks Ken Kennedy unless someone has a better idea. I'm not into sculpting or painting but I'm willing to paint a head. I've always thought a modded non real scan TTL Shane McMahon head would look kinda like Gertner. That was the other option I was thinking. It has a more chubby looking face and is cheaper to find. Thanks buddy |
|
|
|
Post by Ben - #6 Munchie on Jun 4, 2015 9:28:02 GMT -5
I half assed photoshopped it last night to see what it would be like. Its not perfect but gives an idea... Would be cool to see a photoshop of Windham with just a goatee, withe the sides of the beard removed.  Couldn't find the original pic that was used so had to go with this, but you get the picture. |
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Jun 4, 2015 9:42:41 GMT -5
  Bought a basic WM hogan just to put the biceps on Warrior! Fits a bit loose but.. Looks perfect IMO! Those biceps do look good. Warrior was always more defined than Hogan-even if smaller-especially in the arms. I know there's a million recipes for making this figure, but what Elite(s) figure did you use to create this? I've been trying to get a custom, Elite articulation figure of this Warrior, along with Warrior USA from '91 Rumble, for a while now but no luck so far. I used warrior elite body on green macho crotch and upper thighs. With warrior tighs and the basic knees+calves.. texas tornado knees n calves work as well.  Ok here's another fixup. animal on hogan. not sure if accurate but looks more heroic. have some lovehandle though. Lol. inspired by those who put the basic hogan body on elite.  Sheik body. Looks more natural. Bulging tummy to the front.  Ok i think this one looks the best.. animal chest on sheik abs. Need to modify in order to make it work though.. which i'm not sure if i should go ahead with it. Lol. |
|
|
|
Post by PJ on Jun 4, 2015 10:41:11 GMT -5
In case anyone wanted to see it Windham wearing the Jakks CS Windham vest.  |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 10:46:45 GMT -5
In case anyone wanted to see it Windham wearing the Jakks CS Windham vest. Got a picture of him with the Jakks head? |
|
|
|
Post by PJ on Jun 4, 2015 10:47:44 GMT -5
No that would be huge on him. Here's a comparison pic with the one I had made as a placeholder. As you can see I had to exaggerate his height to try and hide the scale of his head.  |
|
|
|
Post by Affliction: Elite Trader on Jun 4, 2015 14:18:26 GMT -5
Is yoko's diaper/sash thing removable? Also are his hips ball jointed? Would like to paint mine red when I find him. The hips are ball jointed but the sash is glued on the way the original shield vests were. It can be removed intact if you take the legs off and slide it down. Hope that helped buddy |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 15:42:40 GMT -5
Whats the best Benoit head for WM 23 I was thinking  |
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 15:54:17 GMT -5
Is yoko's diaper/sash thing removable? Also are his hips ball jointed? Would like to paint mine red when I find him. The hips are ball jointed but the sash is glued on the way the original shield vests were. It can be removed intact if you take the legs off and slide it down. Hope that helped buddy Very much appreciated, huge help,thanks bro! |
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 15:57:09 GMT -5
I've always thought a modded non real scan TTL Shane McMahon head would look kinda like Gertner. That was the other option I was thinking. It has a more chubby looking face and is cheaper to find. Thanks buddy There's also the cs version that is the same head sculpt, but already ball joint ready as well. |
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 16:04:18 GMT -5
Whats the best Benoit head for WM 23 I was thinking Imo, that's the best Benoit head to use on a Mattel, no matter what gear. Same head I have on mine. Attachment Deleted |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 16:08:37 GMT -5
That was the other option I was thinking. It has a more chubby looking face and is cheaper to find. Thanks buddy There's also the cs version that is the same head sculpt, but already ball joint ready as well. That's the real scan version. He's talking about the non real scan. |
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 16:18:12 GMT -5
There's also the cs version that is the same head sculpt, but already ball joint ready as well. That's the real scan version. He's talking about the non real scan. Ahh, I forgot that there was a pre rs Shane. I'm sure I have it in a box somewhere too. |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 18:03:49 GMT -5
Whats the best Benoit head for WM 23 I was thinking Imo, that's the best Benoit head to use on a Mattel, no matter what gear. Same head I have on mine. when I swap jakks the head usually the bottom joint pops off not the top how do I fix that |
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 18:15:27 GMT -5
Imo, that's the best Benoit head to use on a Mattel, no matter what gear. Same head I have on mine. when I swap jakks the head usually the bottom joint pops off not the top how do I fix that Heat the head up, then use a pair of pliers to pull the stem out. Can be very frustrating. So just take your time, make sure that the head feels pliable, or rubbery, and pull it out. |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 18:21:43 GMT -5
when I swap jakks the head usually the bottom joint pops off not the top how do I fix that Heat the head up, then use a pair of pliers to pull the stem out. Can be very frustrating. So just take your time, make sure that the head feels pliable, or rubbery, and pull it out. Thank you sir does the benoit do that because all my ruthless aggression do it not my Deluxe |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 18:45:36 GMT -5
|
|
Neekotronus
Main Eventer
Place him upon me
Joined on: Dec 20, 2001 17:08:00 GMT -5
Posts: 1,460
|
Post by Neekotronus on Jun 4, 2015 18:46:40 GMT -5
Heat the head up, then use a pair of pliers to pull the stem out. Can be very frustrating. So just take your time, make sure that the head feels pliable, or rubbery, and pull it out. Thank you sir does the benoit do that because all my ruthless aggression do it not my Deluxe I honestly can't say for certain as I put mine together 3 years ago, but I have had the neck stems pop out on both ra and da, typically when the head hasn't been heated enough. |
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 18:46:41 GMT -5
Not the best photo sorry at my parents house for the week while on vaca
|
|
Deleted
Joined on: Nov 15, 2024 13:42:48 GMT -5
Posts: 0
|
Post by Deleted on Jun 4, 2015 19:47:44 GMT -5
I think that bald Wyndham sculpt would work great for a Kurt Angle. Anyone else think about that?
|
|
eekotronus!
