|
Post by kingnothing ~ Hardwired... on Mar 25, 2015 19:46:07 GMT -5
Yeah you can remove the arms. I've seen people open them and when they pull them out of the box the arms come off. Thanks, I was hoping so No! You can't! At least not the new HHH in the battle pack. It's an elite figure but It uses a different torso than the BAFs. The Heyman in the BP with Brock had basic legs but a BAF torso and arms that could be pulled off. I tugged on my BP HHH arms and could not get them off.
|
|
|
Post by MrPerfect25 on Mar 25, 2015 19:58:23 GMT -5
What larger arms with a skin tone match have people used to fix up their elite and basic Mr Perfects?
|
|
|
Post by knupmc on Mar 25, 2015 20:46:15 GMT -5
Haven't posted anything in a while because I really haven't had any good ideas :/ Anyways, here's a new updated HHH scan I made. I hated the "crop" hair cut and I did not like the expression on the elite 35. So I used a dremel, and repainted the beard. Once I get bp32 hhh, this head will go on it. Original: Updated: Side by side comparison: Reference Pic: Comments, questions or concerns welcomed
|
|
|
Post by The Champ is Here! on Mar 25, 2015 21:21:04 GMT -5
Is there any combo of calfs and boots that are the same size as bryan calfs with kickers?
|
|
|
Post by ThugSuperstar on Mar 25, 2015 22:06:34 GMT -5
Has anyone tried raising the WMXXX Undertaker head on the body? The head is ridiculously low on the neck to the point where you can't even see his new neck tattoo. What exactly is the trick that PJ has used with cotton?
*Edit* - Wound up doing it myself. It makes the figure look 100x better. I'll try and post pics tomorrow.
|
|
ellisd
Main Eventer
Joined on: May 26, 2009 0:30:49 GMT -5
Posts: 4,757
|
Post by ellisd on Mar 25, 2015 22:23:35 GMT -5
No! You can't! At least not the new HHH in the battle pack. It's an elite figure but It uses a different torso than the BAFs. The Heyman in the BP with Brock had basic legs but a BAF torso and arms that could be pulled off. I tugged on my BP HHH arms and could not get them off. Thanks. I was hoping you could because I needed black sleeved BAF arms, and that figure is everywhere right now. Guess I'll come up with something else.
|
|
|
Post by ThugSuperstar on Mar 25, 2015 22:50:20 GMT -5
|
|
|
Post by POOR-ly Cuyler on Mar 25, 2015 22:54:44 GMT -5
Id just use some sculpy and texture it. Unless you want fabric.
|
|
|
Post by rustyy on Mar 25, 2015 22:57:10 GMT -5
I don't see why not, might be hard to glue down but with enough effort anything is possible. Just BOLIEVE.
|
|
|
Post by ThugSuperstar on Mar 25, 2015 23:01:50 GMT -5
I don't see why not, might be hard to glue down but with enough effort anything is possible. Just BOLIEVE. Lol. Once I get it cut to the right size/length I think it should be pretty easy to glue onto the boots with a little bit of brush-on super glue.
|
|
|
Post by wwextreme25 on Mar 26, 2015 9:02:04 GMT -5
Love that HHH looks awesome now, great job on the sanding.
|
|
|
Post by FWE on Mar 26, 2015 10:34:00 GMT -5
did you like my fur boots fix up?
|
|
Bullgod
Main Eventer
Joined on: Feb 8, 2006 14:22:13 GMT -5
Posts: 1,014
|
Post by Bullgod on Mar 26, 2015 11:22:13 GMT -5
Shawn Michaels from In Your House: D-Generation X I know it has some wear on the boot paint but that has now been fixed
|
|
|
Post by The Champ is Here! on Mar 26, 2015 13:22:39 GMT -5
Ive got the bodies figured out...what heads look good for young bucks?
|
|
Deleted
Joined on: Jun 8, 2024 2:18:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 26, 2015 16:17:52 GMT -5
Haven't posted anything in a while because I really haven't had any good ideas :/ Anyways, here's a new updated HHH scan I made. I hated the "crop" hair cut and I did not like the expression on the elite 35. So I used a dremel, and repainted the beard. Once I get bp32 hhh, this head will go on it. Original: Updated: Side by side comparison: Reference Pic: Comments, questions or concerns welcomed Looks great, eyebrows are a little thick looking at the actual hhh picture , that's the only criticism I can offer tho as the sanding of the hair is flawless
|
|
|
Post by knupmc on Mar 26, 2015 16:20:00 GMT -5
Haven't posted anything in a while because I really haven't had any good ideas :/ Anyways, here's a new updated HHH scan I made. I hated the "crop" hair cut and I did not like the expression on the elite 35. So I used a dremel, and repainted the beard. Once I get bp32 hhh, this head will go on it. Original: Updated: Side by side comparison: Reference Pic: Comments, questions or concerns welcomed Looks great, eyebrows are a little thick looking at the actual hhh picture , that's the only criticism I can offer tho as the sanding of the hair is flawless Thanks apoc! Now that you mention it the eyebrows do look a tad too thick. I'll trim them down a little
|
|
|
Post by Nivro™ on Mar 26, 2015 16:39:47 GMT -5
Looks great, eyebrows are a little thick looking at the actual hhh picture , that's the only criticism I can offer tho as the sanding of the hair is flawless Thanks apoc! Now that you mention it the eyebrows do look a tad too thick. I'll trim them down a little The sanding look perfect but he looks more "bald" the buzzed. Maybe try to mix some paints to get a shade that's just a hair (no pun intended) darker then his face skintone and paint the hair a bit?
|
|
|
Post by Mr. #1derful 🇵🇸 on Mar 26, 2015 16:48:16 GMT -5
What larger arms with a skin tone match have people used to fix up their elite and basic Mr Perfects? I've been eyeing (Elite) Luke Harper/ Erick Rowan arms. You could also just switch out Kane's biceps with Perfect's if you don't want to paint wrist tape. @ knupmc I'd do a subtle wash of brown on the scalp to top off HHH.
|
|
|
Post by knupmc on Mar 26, 2015 19:13:05 GMT -5
Thanks apoc! Now that you mention it the eyebrows do look a tad too thick. I'll trim them down a little The sanding look perfect but he looks more "bald" the buzzed. Maybe try to mix some paints to get a shade that's just a hair (no pun intended) darker then his face skintone and paint the hair a bit? Yea I actually painted the head at first the same color as the beard, but it too much resembled the bp26 hhh head. So I sanded it off. And I mixed brown and white to lighten the color, but didn't work. I also tried color pencils but looked awful Mr. #1derful 🇵🇸 How do I "wash" it? And even Nivro™ if you know that'd be great. Thanks guys
|
|
Deleted
Joined on: Jun 8, 2024 2:18:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 26, 2015 19:14:39 GMT -5
Shawn Michaels from In Your House: D-Generation X I know it has some wear on the boot paint but that has now been fixed Dude, this looks incredible! You paint like a pro.
|
|