Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 29, 2013 20:03:16 GMT -5
Love All of these fix ups on the head-scans! A pure improvement. Thanks for the kind words. I really appreciate it. Have you thought about combining the long hair (longish) of the old headscan with the beard of a newer headscan?
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 29, 2013 20:11:50 GMT -5
Started some Basic to Elite conversions. I will probably do a few boot swaps, but other than I will probably just remove the logos and keep them as is. Trent Baretta, Chris Masters Alex Riley, Micheal McGillicutty, Mason Ryan Curt Hawkins, Shelton benjamin Usos, Carlito Huncio, Hurricane
|
|
Deep Shadows
Main Eventer
MXW 6 is here! https://youtu.be/LiDlNuiKmjA
Joined on: Jul 7, 2006 2:39:30 GMT -5
Posts: 3,504
|
Post by Deep Shadows on Apr 29, 2013 20:17:46 GMT -5
Thanks for the kind words. I really appreciate it. Have you thought about combining the long hair (longish) of the old headscan with the beard of a newer headscan? Actually I did think about transplanting the back piece of the RA head to the Mattel head. If it looks good I'll definitely go that route. As far as what I've sculpted thus far, I'm pleased. Now I just have to figure out the best method for hardening the sculpey. Started some Basic to Elite conversions. I will probably do a few boot swaps, but other than I will probably just remove the logos and keep them as is. These are all looking very nice. I wish I would've been able to get my hands on the Basic Hurricane figure.
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 29, 2013 20:21:33 GMT -5
Started some Basic to Elite conversions. I will probably do a few boot swaps, but other than I will probably just remove the logos and keep them as is. Trent Baretta, Chris Masters Alex Riley, Micheal McGillicutty, Mason Ryan Curt Hawkins, Shelton benjamin Usos, Carlito Huncio, Hurricane good job man
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 29, 2013 21:17:58 GMT -5
great beginnings to those basic-elite fix ups coon. great body choices
|
|
|
Post by East Coast on Apr 30, 2013 2:55:53 GMT -5
i really wanted to do that. Basics to elite conversions.....but the cost of it, has steered me clear. So far.
I would say Riley and Masters should be bigger
and Usos/McGillicutty should be smaller.
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 4:07:56 GMT -5
I really like the Eddie Guerrero as an USO basis. It's probably the best option available. Great job
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 15:04:52 GMT -5
I want to pick different torsos for Usos, but since I am not doing any kind of torso swaps, they will probably stay. Can't think of anyone else who matches master's tone except Triple H, but I don't want to put him on that body. Also, not sure how to make Riley bigger either.
|
|
Kingdomofmadness89
Main Eventer
"I'm the tower of power, too sweet to be sour. I'm funky like a monkey. OHHHHHH! YEAHHHHHH!
Joined on: Nov 18, 2011 17:46:24 GMT -5
Posts: 1,492
|
Post by Kingdomofmadness89 on Apr 30, 2013 15:26:05 GMT -5
I think the jakks doink head is big for mattel and i don't have it anyway. so here is my wip using mattel head. Still undecided how to do the hair though.. Looking good bud! The way that scan looks you should def make that heel doink tho.
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 15:41:01 GMT -5
I want to pick different torsos for Usos, but since I am not doing any kind of torso swaps, they will probably stay. Can't think of anyone else who matches master's tone except Triple H, but I don't want to put him on that body. Also, not sure how to make Riley bigger either. I think Riley suits the bulldog torso more than masters to be honest, just my opinion though. I suppose masters would work on a Kevin von erich torso if you think the triple h/orndorff body is too big
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 15:43:09 GMT -5
I want to pick different torsos for Usos, but since I am not doing any kind of torso swaps, they will probably stay. Can't think of anyone else who matches master's tone except Triple H, but I don't want to put him on that body. Also, not sure how to make Riley bigger either. I think Riley suits the bulldog torso more than masters to be honest, just my opinion though. I suppose masters would work on a Kevin von erich torso if you think the triple h/orndorff body is too big Orndorff I believe has the same torso as Von Erich. I would have n problem with those, but Masters tone does not match them.
|
|
|
Post by PJ on Apr 30, 2013 16:41:12 GMT -5
Orndorff has the same torso as Triple H, Ultimate Warrior and Kerry Von Erich. Kevin uses the torso used Macho Man.
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 17:29:10 GMT -5
Orndorff has the same torso as Triple H, Ultimate Warrior and Kerry Von Erich. Kevin uses the torso used Macho Man. Thanks for clearing that up PJ. Am I correct in saying that Warrior, Kerry and Orndorff have different tones than Triple H? There's seem to be a bit more pinkish than Triple H.
|
|
|
Post by PJ on Apr 30, 2013 17:36:54 GMT -5
I think Triple H's is a duller shade than both Orndorff & Kerry. But I'm not sure about Warrior
|
|
Deleted
Joined on: Nov 20, 2024 2:21:57 GMT -5
Posts: 0
|
Post by Deleted on Apr 30, 2013 17:41:43 GMT -5
I think Triple H's is a duller shade than both Orndorff & Kerry. But I'm not sure about Warrior I am thinking that the E4 Warrior and the E6 Warrior have different skin tones. The one in your sig seems to be closer to Triple H rather than Orndorff. When I checked my E6 one, he was the same tone as Tornado.
|
|
DcW
Mid-Carder
Joined on: Dec 12, 2012 2:52:01 GMT -5
Posts: 137
|
Post by DcW on May 1, 2013 3:52:13 GMT -5
hello been on the forum for a while but im just getting into fixups and customs im looking for formulas for NWO Hogan RVD Goldberg old rick flair(2006-) and the dudleys and finally can you use jakks boots(nwo hogan on a mattel figure) any help will be appreciated thanks dave
|
|
Daniel Arshad
Superstar
Joined on: Jun 13, 2011 6:56:25 GMT -5
Posts: 997
|
Post by Daniel Arshad on May 1, 2013 6:28:01 GMT -5
NWO Hogan: Elite Kane w/ the R3 or CS head and accessories
RVD: Mr. Perfect with lower legs from any of the elites w/ kickpads (Miz, CM Punk, Jericho for example) and R3 head
Goldberg: The newer (E14 and onwards) Cena torso with Triple H crotch and upper legs and Austin lower legs
Old Ric Flair: Legends 2 packs Volkoff (red tights) or Legends Jim Duggan (blue tights) w/ the last RA Flair head (it's a bit too big but the likeness is superb)
Dudleys: R3 Heads, Bushwackers w/ custom t-shirts for both. If you want bulkier torsos, the aforementioned Volkoff or Duggan for Bubba and King Booker for Devon will work great. With the T-shirts on the overlap around the waist won't be noticeable at all.
And yes, I do think you can use the Jakks boots (the entire lower leg piece) on some of the larger mattels, although it may not be 100% flush with the joint. Hope that helps!
|
|
|
Post by D.B.K. on Jun 5, 2013 4:20:31 GMT -5
great looking Crush fix up! What head did you use?
|
|
|
Post by Jack Specific on Aug 22, 2013 21:33:32 GMT -5
Hey Guys,
I accidentally deleted the original fix ups thread. I deeply apologize. I have contacted Proboards to see if they can restore it. In the meantime please use this one and if/when it gets restored I'll merge these with that.
Thanks JS
UPDATE:
I have to pay Proboards $20 to get them to restore the post. I put in the request today. There is still no guarantee they can do it, keep your fingers crossed! Thanks JS
UPDATE 2:
Ok I paid them and they said it can take up to 10 business days after they confirm the payment. Please be patient. Thanks JS
Update from Proboards 9/9/13: Unfortunately I have to apologize once again for delays. To update you briefly, some server issues are currently preventing us from performing content restores. We're working to get this system operational as fast as we can, but this will mean that this ticket is postponed until we can do so. I've been given a rough estimation that everything should be good to go by the end of the week.
|
|
|
Post by YES! YES! YES! on Aug 22, 2013 21:35:01 GMT -5
Hopefully it can be restored. I loved all of the fix-ups! Meantime... *insert smart comment*
|
|