Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 23, 2013 23:56:29 GMT -5
Thank you for sharing your recipe! I was hoping that you would say some other part for the arms outside of Cena. I'm trying to avoid going over paint as much as possible when it comes to fix-ups. Thank you again! To remove Cena's arm gear just use a little acetone on a q-tip. |
|
|
|
Post by rustyy on Sept 24, 2013 0:02:36 GMT -5
Thank you for sharing your recipe! I was hoping that you would say some other part for the arms outside of Cena. I'm trying to avoid going over paint as much as possible when it comes to fix-ups. Thank you again! To remove Cena's arm gear just use a little acetone on a q-tip. I acetoned off his arm band but it left a pink mark. Ruined my Benoit |
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 0:40:08 GMT -5
|
|
|
|
Post by The Dazzler on Sept 24, 2013 1:52:43 GMT -5
Josh, your Barrett fix-up is exactly how E24 Barrett should have looked like in the first place. Would you mind telling me the arms you used and what other custom parts you used just in case? Also, are there any problems with the arm width/length? Again fantastic fix-up man. |
|
Deep Shadows
Main Eventer
MXW 6 is here! https://youtu.be/LiDlNuiKmjA
Joined on: Jul 7, 2006 2:39:30 GMT -5
Posts: 3,504
|
Post by Deep Shadows on Sept 24, 2013 2:41:45 GMT -5
Can someone give me more info on using shoe polish to darken a figures skin? Possibly a tutorial? I'm looking to darken my entire custom Taz so it has the appropriate skintone.
|
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 2:42:54 GMT -5
Josh, your Barrett fix-up is exactly how E24 Barrett should have looked like in the first place. Would you mind telling me the arms you used and what other custom parts you used just in case? Also, are there any problems with the arm width/length? Again fantastic fix-up man. Thanks, I used the forearms of an elite Matt Hardy, the width/length is good, the only problem is that the skin tone is very slightly off, not noticeable from the naked eye, thanks for comment. |
|
Ruff Figures
Superstar
Joined on: Jul 1, 2008 18:06:49 GMT -5
Posts: 786
|
Post by Ruff Figures on Sept 24, 2013 10:25:18 GMT -5
Looks like for the chest piece he used a BAF Miz Team Johnny shirt just cut to form the chest plate. Bingo. Good eye. |
|
raVen™
POSSIBLE BAD TRADER
WF 10 Year Member
Joined on: Jul 11, 2003 5:33:22 GMT -5
Posts: 2,920
|
Post by raVen™ on Sept 24, 2013 10:35:06 GMT -5
Now Trish isn't wearing last night's club make-up anymore.  Nice of Mattel to make a Nicole Sullivan figure. She just came from hanging out with RVD and Randy Orton. |
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 14:48:24 GMT -5
Hello Gents, I have a question, would the upcoming Bruno Sammartino upper body minus the hair work good for Big Poppa Pump Scott Steiner? thanks If you are planning on using the JAKKS TNA head I would say yes otherwise the JAKKS WWE head will not work as the skintone difference will make it look off unless you are planning on painting a full skin tone. Either way I would say the torso is perfect for Steiner. To remove Cena's arm gear just use a little acetone on a q-tip. I acetoned off his arm band but it left a pink mark. Ruined my Benoit Use another q-Tip and put a little more acetone on that and continue to rub the surface that pink color will go away. |
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 21:33:08 GMT -5
Hello Gents, I have a question, would the upcoming Bruno Sammartino upper body minus the hair work good for Big Poppa Pump Scott Steiner? thanks If you are planning on using the JAKKS TNA head I would say yes otherwise the JAKKS WWE head will not work as the skintone difference will make it look off unless you are planning on painting a full skin tone. Either way I would say the torso is perfect for Steiner. I acetoned off his arm band but it left a pink mark. Ruined my Benoit Use another q-Tip and put a little more acetone on that and continue to rub the surface that pink color will go away. I disagree about the steiner torso. Steiner was big and ripped not just big like bruno. I would say a warrior torso would be better even though its not nearly thick enough. It is ripped like steiner was and would look better IMO. It has been done many times with that torso and looks fine. |
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 21:54:29 GMT -5
If you are planning on using the JAKKS TNA head I would say yes otherwise the JAKKS WWE head will not work as the skintone difference will make it look off unless you are planning on painting a full skin tone. Either way I would say the torso is perfect for Steiner. Use another q-Tip and put a little more acetone on that and continue to rub the surface that pink color will go away. I disagree about the steiner torso. Steiner was big and ripped not just big like bruno. I would say a warrior torso would be better even though its not nearly thick enough. It is ripped like steiner was and would look better IMO. It has been done many times with that torso and looks fine. Pop I agree to an extent, same arguement could be made for people using an Elite Zeke for Bobby Lashley. He wasn't nearly as big as Zeke but people make it work. |
|
Deleted
Joined on: Nov 16, 2024 13:32:47 GMT -5
Posts: 0
|
Post by Deleted on Sept 24, 2013 22:19:31 GMT -5
|
|
kidjoe
Mid-Carder
Joined on: Feb 5, 2012 4:38:26 GMT -5
Posts: 420
|
Post by kidjoe on Sept 25, 2013 2:46:23 GMT -5
that looks great, definately gonna do that here is what im working on, the tight colour is too bright for the attire im doing but i dont mind, light has made chavo's torso look too light, strange...  and if i could ask for help, does anyone happen to have a clear shot or printout ready of this chavo tight design?  |
|
|
|
Post by charabro on Sept 25, 2013 10:11:24 GMT -5
 Converted my old switchblade Callihan into elite form. Made the original finishing moves figure about a year ago, head needs touched up a bit. |
|
gullyman1985
Mid-Carder
Joined on: Jul 31, 2011 8:36:27 GMT -5
Posts: 142
|
Post by gullyman1985 on Sept 25, 2013 12:08:54 GMT -5
www.EBAY LINK NOT ALLOWED/itm/WWE-CHAVO-GUERRERO-RING-WORN-TIGHTS-SIGNED-WITH-PROOF-1-/370536416613 Reference pic for chavo
|
|
|
|
Post by AlexWestCollects on Sept 25, 2013 12:53:33 GMT -5
Did an 80's hulkster. Yea yea not accurate. Idc hogan was a real superhero in the 80s so let him look jakked!!!  My updated mattel hogans.   Tna hulkster is next. If anyone has an extra DI 4 hogan head plz hit me up. Really need it. Thx. |
|
|
|
Post by Joe/Smurf on Sept 25, 2013 13:53:53 GMT -5
Did an 80's hulkster. Yea yea not accurate. Idc hogan was a real superhero in the 80s so let him look jakked!!! Tna hulkster is next. If anyone has an extra DI 4 hogan head plz hit me up. Really need it. Thx. You say "not accurate," I say that's exactly how Mattel would release it. |
|
|
|
Post by AlexWestCollects on Sept 25, 2013 13:56:58 GMT -5
Did an 80's hulkster. Yea yea not accurate. Idc hogan was a real superhero in the 80s so let him look jakked!!! Tna hulkster is next. If anyone has an extra DI 4 hogan head plz hit me up. Really need it. Thx. You say "not accurate," I say that's exactly how Mattel would release it. I don't think they would. They would def do hogan up right. |
|
|
|
Post by Joe/Smurf on Sept 25, 2013 13:58:29 GMT -5
You say "not accurate," I say that's exactly how Mattel would release it. I don't think they would. They would def do hogan up right. I just mean they would use that torso for sure. |
|
|
|
Post by AlexWestCollects on Sept 25, 2013 14:18:41 GMT -5
I don't think they would. They would def do hogan up right. I just mean they would use that torso for sure. Yea i know what u meant. But I think they would make a new mold for Hulk. |
|
NOW OPEN FOR CUSTOMS, pm me and see if we can solve something out
