Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 13, 2014 23:07:41 GMT -5
Thanks and I only did it because you felt so strongly about how much you hated me and wanted me to die. No problem. The only reason I knew you did it was because I tried to send you a PM apologizing about that. I said a lot of things that were out of line and you had/have every right to hate me. Still, I want to publicly say that I'm sorry. Thanks I probably said some stuff I shouldn't have so I'm sorry too. |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 13, 2014 23:15:13 GMT -5
No problem. The only reason I knew you did it was because I tried to send you a PM apologizing about that. I said a lot of things that were out of line and you had/have every right to hate me. Still, I want to publicly say that I'm sorry. Thanks I probably said some stuff I shouldn't have so I'm sorry too. Let's just call it even, then. Don't worry about it, clean slate. |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 13, 2014 23:33:02 GMT -5
Does Benoit's TTL head require dremeling? I noticed it sat weirdly when I put it on a TTL stone cold body.
|
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 13, 2014 23:34:37 GMT -5
Does Benoit's TTL head require dremeling? I noticed it sat weirdly when I put it on a TTL stone cold body. I haven't come across a TTL head that doesn't need to be Dremeled. I don't know which specific head you're talking about, but my money is on yes. |
|
|
|
Post by Colter on Mar 14, 2014 1:22:15 GMT -5
Hey, I have a few questions:
How do you take off a TTL Head? Hot water?
What are some easy basic customs?
And finally, what should I use for sealer?
Thanks.
|
|
xtremer18
Main Eventer
Joined on: Aug 15, 2013 19:03:56 GMT -5
Posts: 1,631
|
Post by xtremer18 on Mar 14, 2014 1:48:53 GMT -5
Hey, I have a few questions: How do you take off a TTL Head? Hot water? What are some easy basic customs? And finally, what should I use for sealer? Thanks. Some people heat the head up with a blow dryer and pop it off, but others use boiling water; for the latter, boil the water for about 15 minutes before dunking the head in for another 30 seconds and then simply, pop it off (Careful as the head may be hot so I would recommend protecting your hands with a paper towel or a pair of gloves; additionally, water tend to sinks in the holes of the torso and can drip out, so be careful!). An example of a basic fix-up would be a Bubba Ray Dudley from 2004, using a Seth Rollins Mattel torso and arms from either Hillbilly Jim or Brock Lesnar. Remove the vest and pick a Jakks RA version of Bubba Ray Dudley from that time and simply swap out the arms, head and vest with the jersey. |
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Mar 14, 2014 1:53:06 GMT -5
This is impressive. One of the best hair sculpts I've ever seen. Thanks man its just a cut and glued flashback christian hair.. hehe |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 2:03:29 GMT -5
This is impressive. One of the best hair sculpts I've ever seen. Thanks man its just a cut and glued flashback christian hair.. hehe Well, you did it better than the rest. Seriously, I still can't get over how great that Jericho looks. It's better than the official Jerichos, and, sure, you may not have had to do much to get it there, but you're the one who saw the connection and pieces it together. I've been seriously considering stealing the idea. |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 2:26:14 GMT -5
I heat my water in a measuring cup for 3 minutes in the microwave and it works just fine Easy basic customs? ColterSabu: Christian body 1 arm is a wrist tape arm 1 arm is Evan Bourne's arm from the early basics (Wristband and armband) White boots TNA Dudley Boyz: D-Von Seth Rollins with TTL D-Von head Kofi arms Custom T-shirt Buh Buh Seth Rollins TTL Head Custom T-Shirt Sandman: Dean Ambrose Devest it and switch the arms with someone who has no wrist tape or gloves RA Head Hardyz Dean for both TTL Heads Paint the long black wrist tape on both of them and give them elbow pads Dean Malenko Bryan with regular boot calves Repaint it accordingly CS Head Raven Survivor Series Cena TTL Head Dean's decals Ralph clothes or just a custom shirt Wrist tape hands I could come up with these all day. Just give me an era to work with |
|
Jamie
Main Eventer
Joined on: Sept 14, 2013 15:54:23 GMT -5
Posts: 3,380
|
Post by Jamie on Mar 14, 2014 4:28:32 GMT -5
I heat my water in a measuring cup for 3 minutes in the microwave and it works just fine Easy basic customs? ColterSabu: Christian body 1 arm is a wrist tape arm 1 arm is Evan Bourne's arm from the early basics (Wristband and armband) White boots TNA Dudley Boyz: D-Von Seth Rollins with TTL D-Von head Kofi arms Custom T-shirt Buh Buh Seth Rollins TTL Head Custom T-Shirt Sandman: Dean Ambrose Devest it and switch the arms with someone who has no wrist tape or gloves RA Head Hardyz Dean for both TTL Heads Paint the long black wrist tape on both of them and give them elbow pads Dean Malenko Bryan with regular boot calves Repaint it accordingly CS Head Raven Survivor Series Cena TTL Head Dean's decals Ralph clothes or just a custom shirt Wrist tape hands I could come up with these all day. Just give me an era to work with Awesome list here! Any ideas for EC3 and NXT guys? |
|
Rattlehead
Main Eventer
WF 10 Year Member
Destruction can be beautiful!
Joined on: Apr 30, 2013 21:30:51 GMT -5
Posts: 3,332
|
Post by Rattlehead on Mar 14, 2014 9:05:42 GMT -5
This is impressive. One of the best hair sculpts I've ever seen. Thanks man its just a cut and glued flashback christian hair.. hehe Haha no worries, still an impressive job. Even easier if I were to try it , I still have an elite 4 Jericho head sitting around. |
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Mar 14, 2014 9:58:32 GMT -5
Thanks man its just a cut and glued flashback christian hair.. hehe Haha no worries, still an impressive job. Even easier if I were to try it , I still have an elite 4 Jericho head sitting around. Yeah. Do it man. I wanna do another one with the older head and sculpt a tied back hair with ponytail. Anyway heres my bossman completed for now.  I bought the tshirt version triple h for the black shoulders, it turns out the black on that is painted on flesh coloured plastic. |
|
|
|
Post by PJ on Mar 14, 2014 13:36:33 GMT -5
Although he looks too lean that Boss Man still looks great.
|
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 14:50:16 GMT -5
Awesome list here! Any ideas for EC3 and NXT guys? EC3 Triple H everything except the arms Rick Martel head with modification (Add beard and stuff) Switch arms with Kane and replace the cuff hand with a regular one Acetone the trunks of course. Another attire of his looks like it work perfectly if you used Texas Tornado and the Rick Martel head. Okay, I'm going by the WWE NXT page so some of these guys may not be employed anymore Adrian Neville Daniel Bryan Modified CM Punk 2010 Heritage head Rusev MAYBE a modded Reigns head. Brock Lesnar Torso Big Show Arms Eziekiel Jackson lowerhalf Repaint the legs and trunks Try modding it for the elite barefoot legs to fit. Adam Rose Christian No clue for the head Bayley Repainted Rosa Mendes Lillian Garcia jakks head repainted with resculpted hair More later |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 17:35:14 GMT -5
n2jib, I have a Boss Man near complete & seeing yours makes me want to finish him up. I do agree with PJ about him looking a bit too lean, but it's hard to find a good torso to use where a vest will fit onto it. I know his height scale probably is a bit taller since you used a HHH torso, but can you get a pic of him next to other figures to give us an idea? The height is where I had a stop with my custom as Boss man was tall and the Shield guys legs are pretty short for him, so he needs a longer torso.
|
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Mar 14, 2014 18:51:39 GMT -5
n2jib, I have a Boss Man near complete & seeing yours makes me want to finish him up. I do agree with PJ about him looking a bit too lean, but it's hard to find a good torso to use where a vest will fit onto it. I know his height scale probably is a bit taller since you used a HHH torso, but can you get a pic of him next to other figures to give us an idea? The height is where I had a stop with my custom as Boss man was tall and the Shield guys legs are pretty short for him, so he needs a longer torso. I used gallows torso with triple h shoulders or arm balls. Reigns' thighs downwards. The height is actually taller than the flashback bossman. Lol. I'll try to take comparison pis when i get home in around 10 hours time. Maybe u can try heat up and strech the vest if u want to use bigger torso like duggan. Cos the reigns vest fit snug on gallows but seems to narrow for kozlov. |
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 18:53:08 GMT -5
If it doesn't stretch then cut it at the seams and sculpt the gap closed?
|
|
|
|
Post by rustyy on Mar 14, 2014 18:54:59 GMT -5
Do basic torsos fit on elites? And does stone cold jeans/trunks match with rollins torso?
|
|
Deleted
Joined on: Nov 19, 2024 15:30:47 GMT -5
Posts: 0
|
Post by Deleted on Mar 14, 2014 18:56:49 GMT -5
I've seen Basic torsos on elites but it doesn't work all the time rustyy |
|
|
|
Post by RAC on Mar 14, 2014 19:02:22 GMT -5
You could always shave down some of the torso to fit the shield vests on. I've gotten them to fit some of the bigger torsos easily that way.
|
|
