|
|
Post by PhoeniX™: Valoween on Jul 16, 2012 6:14:40 GMT -5
I needed a new ring for my pic fed, but found the Mattel basic ring to be far too small for mattels. I cut the ring into four corners and used brackets and bolts to keep the base sturdy. The canvas is the Jakks Hardcore ring, which is 15x15 itself, so with the black plastic apron, its a little bigger than that. I plan to eventually to get some wood to make the canvas bigger, and I also ordered some black and yellow 3mm elastic cord for a new set of ropes.       I guess the ropes are a little shorter than I like but I feel it works quite well for the pic fed. I will cover up gaps with black paper, until I can figure out how to make a cloth apron. I would like to give Josh credit for the idea behind, his is better executed though. |
|
Razor-toothed™
Superstar
I am Razor-toothed!
Joined on: Jun 1, 2012 2:05:43 GMT -5
Posts: 989
|
Post by Razor-toothed™ on Jul 16, 2012 8:12:17 GMT -5
looks good might do this myself
|
|
|
|
Post by Scotty on Jul 16, 2012 11:46:59 GMT -5
Looks nice, just put some Rings skirts on though
|
|
|
|
Post by hCo.Bro™ [brandon_lee] on Jul 16, 2012 12:38:20 GMT -5
I did the same thing with the Jakks Spring ring awhile back to make it 18x18. Looks good!
|
|
Tyler Black
Main Eventer
the former #1 Tyler Black fan/Tyler F'n Black
Joined on: Jul 19, 2009 15:37:40 GMT -5
Posts: 2,544
|
Post by Tyler Black on Jul 16, 2012 23:07:43 GMT -5
Looks great u should order a ring skirt from napro for it
|
|
|
|
Post by nathanielnd on Jul 17, 2012 0:34:18 GMT -5
Did the same thing earlier this weekend  . 16x16 though. Gotta get some custom ringskirts though. Looks awesome though man! |
|
|
|
Post by PhoeniX™: Valoween on Jul 17, 2012 5:09:59 GMT -5
Thanks guys.
I was surprised the base was so sturdy after I was done. It's a simple idea but it works.
|
|
Deleted
Joined on: Nov 16, 2024 13:07:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 17, 2012 9:13:03 GMT -5
That's a pretty cool idea, might have a crack at that myself. I've just bought some blue elastic cord for my ESR.
|
|
|
|
Post by D.B.K. on Jul 17, 2012 9:44:22 GMT -5
Looks nice, just put some Rings skirts on though It looks good, but would look even better with some ring skirts on. Great idea! |
|
|
|
Post by JHTB® on Jul 17, 2012 15:59:27 GMT -5
Really nice! I might do this since I have 3 spare basic rings...
|
|
|
|
Post by Turnbuckle Zealot(Phil) on Jul 17, 2012 20:17:56 GMT -5
Great idea man, I'm about to buy a basic ring & I'll do that.
|
|
|
|
Post by done on Jul 17, 2012 20:33:52 GMT -5
Looks good, the canvas looks pretty neat also.
|
|
|
|
Post by Turnbuckle Zealot(Phil) on Jul 19, 2012 23:39:03 GMT -5
Could you please explain your designs?
I'm currently working on one based off the initial appearance of yours by sawing mine in the middle on all for sides, filing down the inside rimming, & screwing in cross beams of equal height to give me an 18x18 ring, but I don't understand how your ropes are holding so well.
|
|
|
|
Post by PhoeniX™: Valoween on Jul 22, 2012 13:14:04 GMT -5
I'm not sure how the ropes/posts are so sturdy either. It literally is just those metal plates screwed down with countersunk nuts and bolts.
|
|
stoningtonj
Main Eventer
THE Stonington J
Joined on: Mar 24, 2006 16:18:45 GMT -5
Posts: 1,494
|
Post by stoningtonj on Aug 3, 2012 23:52:47 GMT -5
Wow I like this. Its not too big and not too small...I might give it a try.
|
|
![hCo.Bro™ [brandon_lee] Avatar](https://prorasslin.files.wordpress.com/2011/02/sting-wide.jpg)
