|
|
Post by swantonbomb15 on Nov 1, 2006 12:43:08 GMT -5
i am doin a leg switch and when i took out the legs,the pegs came out too.how do i get them back in?
|
|
|
|
Post by swantonbomb15 on Nov 1, 2006 15:53:22 GMT -5
bump
|
|
|
|
Post by swantonbomb15 on Nov 1, 2006 16:33:41 GMT -5
bump
|
|
|
|
Post by instigator on Nov 1, 2006 17:36:57 GMT -5
you shouldnt be bumping your own threads...and be more specific but if you mean the pegs that are in the knees to get them back it you can push the peg half way in and than slide the peg into the leg than pusgh it threw to the otherside if you can get it in try warming up some water so the peg and leg will be soft and it should be more easy to insert...
|
|
Deleted
Joined on: Nov 26, 2024 5:43:15 GMT -5
Posts: 0
|
Post by Deleted on Nov 1, 2006 19:33:52 GMT -5
If u cant get the pegs back in, cut up part of a toothpick and put some super glue on it and put it in. I know it sounds weird but it works. Hope I helped
|
|
|
|
Post by Nick Maniwa on Nov 1, 2006 23:31:55 GMT -5
What I usually do is put the peg back in the lower leg, heat up some water, put the both pieces in the water then put the lower leg in sideways then turn it and force the peg in. Pliers help out the process, as well as a screwdriver. It seems like gibberish but it really works.
|
|
Pope Kiril I
Main Eventer
We Choose to Be called by Our Own Name Kiril
Joined on: Mar 11, 2003 22:47:53 GMT -5
Posts: 2,696
|
Post by Pope Kiril I on Nov 2, 2006 0:17:30 GMT -5
the trick I use is to use something like an Awl or a Pick and widen the part were the peg Goes ( in both the upper and lower leg) once the peg is in and use pliers or a Clamp and press the entire Joint together that usually does the trick
|
|
