|
|
Post by ultimatewarrior77 on Dec 26, 2006 19:15:26 GMT -5
I need some good advice on how to pop off the CS heads without damaging anything. Any advice would be most helpful!
|
|
|
|
Post by megadeth on Dec 26, 2006 19:36:59 GMT -5
I just put like a cloth over the head and use needle nose pliers and twist the head to the side until i hear it pop out its easy to do and never breaks any parts or just pull straight up on the head and it will just pop out
|
|
becca
Main Eventer
Joined on: Dec 13, 2005 11:20:18 GMT -5
Posts: 4,042
|
Post by becca on Dec 26, 2006 20:00:50 GMT -5
I always push upwards under the chin. Though someone has said that doing that broke the back of the neck on one of their figures, I've never had that happen. And I've removed a lot of heads.
|
|
|
|
Post by wwe4ever on Dec 26, 2006 21:15:45 GMT -5
I always push upwards under the chin. Though someone has said that doing that broke the back of the neck on one of their figures, I've never had that happen. And I've removed a lot of heads. I do that all the time and it works. The odd time the peg is so tight in the neck the head pops off but the peg stays in the neck so I have to pop the head back on the peg and carefully take it off again. |
|
|
|
Post by cenasfan on Dec 27, 2006 19:18:43 GMT -5
I always push upwards under the chin. Though someone has said that doing that broke the back of the neck on one of their figures, I've never had that happen. And I've removed a lot of heads. ive done it a couple times |
|
