|
|
Post by HVMMONS on Sept 5, 2013 13:54:59 GMT -5
Besides Elites, how can you carefully open the package without tearing the box? I've tried to search for this question, no luck. I'm trying to open a Legends package, would i just use a knife to cut alongside the package?  Thanks to anyone who has answers/suggestions. |
|
Deleted
Joined on: Nov 15, 2024 18:04:03 GMT -5
Posts: 0
|
Post by Deleted on Sept 5, 2013 13:58:00 GMT -5
I've wondered this myself but never dared to ask.
|
|
HydroX
Superstar
#HEEL
Joined on: Feb 4, 2013 11:34:43 GMT -5
Posts: 965
|
Post by HydroX on Sept 5, 2013 14:01:10 GMT -5
I used to be extremely careful, only because I used to save the packaging... then I realized I was becoming a hoarder. So now I tear it open like a lion vs. a gazelle.
I believe you can use a hair dryer to loosen the glue on the bubble packaging and remove it that way. I could be wrong, though.
|
|
|
|
Post by HVMMONS on Sept 5, 2013 14:03:14 GMT -5
I used to be extremely careful, only because I used to save the packaging... then I realized I was becoming a hoarder. So now I tear it open like a lion vs. a gazelle. I believe you can use a hair dryer to loosen the glue on the bubble packaging and remove it that way. I could be wrong, though. If i was dealing with a normal basic Mattel figure, then i would rip that sucker open, but i really like the packaging for the Legends series. Just wondering how i can carefully go about this. |
|
|
|
Post by The Madness on Sept 5, 2013 14:05:41 GMT -5
I'm trying to open a Legends package, would i just use a knife to cut alongside the package? Yup. |
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Sept 5, 2013 14:18:03 GMT -5
I'm trying to open a Legends package, would i just use a knife to cut alongside the package? Yup. Agreed! Just run its course carefully, otherwise if you allow the box cutter/knife to glad at will it could start cutting through the card or worse your finger/figure/accessories. |
|
|
|
Post by The Madness on Sept 5, 2013 14:39:37 GMT -5
I suppose I should elaborate a bit for the OP.
Personally, since there's no good way to repackage them, I cut them to where you can still save the cards.
How I do it is to use an X-acto knife and cut only through the bubble (outside plastic part), but not the tray (inside plastic part). That way, you'll get less resistance and have more control over your cutting path. I keep a good distance from the card, because that part comes later, when you've got more control. After you've gotten the entire bubble off, you can use your X-acto knife again to go along the pieces that are left and cut it down to where it's even with the card, carefully trimming off any excess plastic. Do it right, and you're left with a card with only the part of the bubble that was glued on. I've been doing this since the Hasbro/LJN days (well, when I was a kid in the '80s, my dad did it for me), and it works like a charm.
If you want to try to display them in their packages later, you can also use an X-acto knife to cut a hole in the top (assuming that's the wide end) of the bubble that's big enough to slide the tray up and out of, but that's a pain in the neck and hardly ever works like it should.
|
|
savage
Main Eventer
Joined on: Dec 6, 2011 11:10:45 GMT -5
Posts: 1,299
|
Post by savage on Sept 5, 2013 15:21:50 GMT -5
So then how are these people doing switches with basic figures and returning them to the store? I dont think they would accept it as a return if its cut open.
|
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Sept 5, 2013 16:26:16 GMT -5
So then how are these people doing switches with basic figures and returning them to the store? I dont think they would accept it as a return if its cut open. Uh… let's not give anyone ideas. You know there are a couple members that do the bit¢h switch $hit. I'm almost certain that this would create a chain reaction of basic switch threads. |
|
Deleted
Joined on: Nov 15, 2024 18:04:03 GMT -5
Posts: 0
|
Post by Deleted on Sept 5, 2013 16:39:04 GMT -5
Box cutter and patience
|
|
|
|
Post by James on Sept 5, 2013 16:39:56 GMT -5
Smells fishy...
|
|
|
|
Post by HVMMONS on Sept 5, 2013 16:44:33 GMT -5
So then how are these people doing switches with basic figures and returning them to the store? I dont think they would accept it as a return if its cut open. Uh… let's not give anyone ideas. You know there are a couple members that do the bit¢h switch $hit. I'm almost certain that this would create a chain reaction of basic switch threads. That question wasn't in my intentions for this thread, haha  . |
|
|
|
Post by RybackV1 on Sept 5, 2013 17:11:34 GMT -5
So then how are these people doing switches with basic figures and returning them to the store? I dont think they would accept it as a return if its cut open. Uh… let's not give anyone ideas. You know there are a couple members that do the bit¢h switch $hit. I'm almost certain that this would create a chain reaction of basic switch threads. If you can't figure out how to carefully open basics/bps/legends then it should honestly stay that way. Asking for help on how to be a figure swapper blows my mind. |
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Sept 5, 2013 19:29:48 GMT -5
Uh… let's not give anyone ideas. You know there are a couple members that do the bit¢h switch $hit. I'm almost certain that this would create a chain reaction of basic switch threads. That question wasn't in my intentions for this thread, haha . Yeah I kinda realized after I replied that it might seem as if I was throwing rocks indirectly, but I assure this was not my intension. I believe you are genuinely trying to preserve your box for collecting purposes but the method that was mentioned is the best bet. |
|
|
|
Post by JHTB® on Sept 5, 2013 19:48:35 GMT -5
I don't care about the plastic bubble so I just cut the side of the plastic with a box cutter leaving just the carding.
|
|
Deleted
Joined on: Nov 15, 2024 18:04:03 GMT -5
Posts: 0
|
Post by Deleted on Sept 5, 2013 20:38:11 GMT -5
Yes
|
|
|
|
Post by KILLER WOLF on Sept 5, 2013 20:42:56 GMT -5
I wouldn't know, I rip into them like........ Christmas morning!
|
|
|
|
Post by JC Motors on Sept 5, 2013 21:35:46 GMT -5
|
|
WMDman
Main Eventer
WF 10 Year Member
Joined on: Jan 6, 2013 10:18:05 GMT -5
Posts: 4,482
|
Post by WMDman on Sept 5, 2013 22:28:36 GMT -5
|
|
Deleted
Joined on: Nov 15, 2024 18:04:03 GMT -5
Posts: 0
|
Post by Deleted on Sept 6, 2013 20:57:13 GMT -5
Besides Elites, how can you carefully open the package without tearing the box? I've tried to search for this question, no luck. I'm trying to open a Legends package, would i just use a knife to cut alongside the package? Thanks to anyone who has answers/suggestions. Take an exacto knife and CUT 3 sides of a rectangle along the BOTTOM plastic underneath (two short sides and one long) - so it's like a flap. Just reach in and grab the plastic the figure is in and pull it out the bottom. They always come right out, then if you wanna put the fig back in you can, and with a piece of tape seal the bottom and still have it like its MOC. Works every time for me. |
|
. 
