|
|
Post by riders on Mar 10, 2006 19:09:28 GMT -5
can somebody give me instructions on how to make a custome ring
|
|
|
|
Post by wreckages on Mar 11, 2006 12:46:07 GMT -5
I copied this from another thread : --- How can I make a custom ring? -Parts: 20"x20" particle board, 3/4" thick 4 1/2" Dowels (10" long) 16 small hook screws 328" elastic string 20 sq. in. Cloth Staple gun -Instructions 1. Put the cloth on the board, and Trace a circle using the dowels in the corners of the ring, about 1/2" away from the actual cut corner. 2. Drill out the circles, with the cloth intact. 3. Stick the dowels into the holes, 5 1/4" on top, 4" onthe bottom. 4. Staple the cloth into place. 5. Drill the tiny hooks into the dowels 6. Cut the elastic string into 4 82" pieces. 7. run the string under the hooks. You will have 2 extra inches to tie. 8. You will now have a prototype for your ring 9. Use foamies to create pads in the corner. 10. Make some aprons, and you're finished -- Hope I helped  |
|
|
|
Post by robvandamisgod on Mar 21, 2006 18:24:33 GMT -5
hey can u maybe write how to make da tna ring karma will be given
|
|
Pope Kiril I
Main Eventer
We Choose to Be called by Our Own Name Kiril
Joined on: Mar 11, 2003 22:47:53 GMT -5
Posts: 2,696
|
Post by Pope Kiril I on Mar 22, 2006 22:07:55 GMT -5
there are instructions in the FAQ on the TNA Ring if my memory serves me correctly Good Luck
|
|
|
|
Post by robvandamisgod on Mar 28, 2006 20:32:20 GMT -5
i cant find it do u think the instructions for the 4sidded ring r the same for the 6 sidded ring
|
|
