|
|
Post by The Fan of Wrestle on Jul 7, 2006 20:15:46 GMT -5
I got a few extra Jamies of ebay so I could use the jean shorts attire, and for a first swap I decided to do kickpads, I'm having trouble with getting the pin all the way through, anyone who has done this got any tips?
|
|
Deleted
Joined on: Nov 24, 2024 21:05:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 7, 2006 20:43:36 GMT -5
Pins can be the worst. I usually heat up the whole joint with a hairdryer and make sure that it's overall really soft. Then I push the pin in ever so carefully.
|
|
|
|
Post by The Fan of Wrestle on Jul 7, 2006 20:45:58 GMT -5
I saw your post on hair drier and it's been less messy than water and alot easier... the problem is the shorts make it hard to position the pin, and after I get one in I don't have enough room to play around to get it through the other side
|
|
Deleted
Joined on: Nov 24, 2024 21:05:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 7, 2006 20:47:50 GMT -5
When I have a problem as such, I often use a phillips head precision screwdriver (one of the small screwdrivers for eyeglasses and such). Don't use a flat head, it can cut into the pin too easily.
|
|
