|
|
Post by Optimus Prime on Jul 10, 2006 15:04:42 GMT -5
Like in says in the title, can I get some help on this?
|
|
Strike
Main Eventer
WF SFBL: 14-2
Joined on: Jul 26, 2005 0:01:35 GMT -5
Posts: 1,685
|
Post by Strike on Jul 10, 2006 15:58:21 GMT -5
Im sure there is some help on this in the FAQ thread.
|
|
Deleted
Joined on: Nov 25, 2024 0:01:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 10, 2006 16:15:45 GMT -5
OMG.
Doesn't anyone read the FAQ thread besides me?
|
|
|
|
Post by Optimus Prime on Jul 10, 2006 16:47:31 GMT -5
Sorry, I don't visit this thread at all.
|
|
Deleted
Joined on: Nov 25, 2024 0:01:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 10, 2006 17:00:29 GMT -5
Not trying to be a prick, but you should. There's plenty of helpful info in there.
|
|
|
|
Post by wwe4ever on Jul 10, 2006 19:19:22 GMT -5
To split a torso boil the fig for about 10 minutes. let it cool down for a bit. then once it's cooled down take a screwdriver and put it in the crack of the shoulder joint and push on it. putting the screwddriver in the shoulder will give you lot's of leverage. repeat that for the other side. to split the top just take 2 screwdrivers and put then down the middle of the torso. putt them in opposite directions and the torso should split fine. don't rush when splitting a torso, take your time and it should work.
to remove a shoulder just boil the arms and take pliers make the pliers grab onto the shoulder and pull it off. it should be really easy to do after it's boled. i hope i helped.
|
|
|
|
Post by Optimus Prime on Jul 11, 2006 0:20:22 GMT -5
To split a torso boil the fig for about 10 minutes. let it cool down for a bit. then once it's cooled down take a screwdriver and put it in the crack of the shoulder joint and push on it. putting the screwddriver in the shoulder will give you lot's of leverage. repeat that for the other side. to split the top just take 2 screwdrivers and put then down the middle of the torso. putt them in opposite directions and the torso should split fine. don't rush when splitting a torso, take your time and it should work. to remove a shoulder just boil the arms and take pliers make the pliers grab onto the shoulder and pull it off. it should be really easy to do after it's boled. i hope i helped. Thanks a bunch dude. |
|
Deleted
Joined on: Nov 25, 2024 0:01:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 11, 2006 3:50:34 GMT -5
Exactly, what does boiling the whole figure do? The body itself is made of a more durable plastic than the limbs, so it won't go soft like the limbs do.
|
|
becca
Main Eventer
Joined on: Dec 13, 2005 11:20:18 GMT -5
Posts: 4,042
|
Post by becca on Jul 11, 2006 9:59:20 GMT -5
I think the idea behind boiling it is to soften up the glue.
And if its your first time splitting one, start on one you dont care about because theres a good chance you might ruin it.
|
|
|
|
Post by wwe4ever on Jul 11, 2006 10:50:24 GMT -5
I think the idea behind boiling it is to soften up the glue. And if its your first time splitting one, start on one you dont care about because theres a good chance you might ruin it. i agree. definately start splitting torso's on figs you don't care about. i learned the hard way. |
|
