|
|
Post by munkyboy on Jul 14, 2006 20:18:48 GMT -5
I'm thinking of doing my first custom, and I was wondering if it's possible to put the head from the Sharkboy TNA figure onto the Jeff Hardy TNA figure to save myself from sculpying a mask. If anyone has done this before, could you please post pics? Thanks to anyone that can help!
|
|
Deleted
Joined on: Nov 25, 2024 0:20:31 GMT -5
Posts: 0
|
Post by Deleted on Jul 14, 2006 20:34:49 GMT -5
Of course it's possible. Pop both of the heads off and put Sharkboy's head on Hardy's body.
|
|
Hbk1994
Superstar
Joined on: May 25, 2006 2:20:26 GMT -5
Posts: 778
|
Post by Hbk1994 on Jul 15, 2006 4:07:11 GMT -5
exactly what he said
|
|
|
|
Post by munkyboy on Jul 17, 2006 20:20:35 GMT -5
Thanks! +karma for both. One more question. I've taken the heads off RAs no problem, but would i do the same thing with these types of figures? Or is there a certain way to do it. Karma to anyone that can help!
|
|
Deleted
Joined on: Nov 25, 2024 0:20:31 GMT -5
Posts: 0
|
Post by Deleted on Jul 17, 2006 21:14:40 GMT -5
Use a hairdryer. On high heat, heat the head all the way around (gotta keep rotating or it won't heat all the way through). When it gets softer (usually after a minute), it's ready to be pulled off. Gently pull off.
Much cleaner and better than water. Water can discolor the figure.
To get the head to harden back, stick it in the freezer for about a minute; remove. Let sit for another minute to thaw. After that, it'll be good as new.
|
|
|
|
Post by munkyboy on Jul 18, 2006 13:11:03 GMT -5
Oh ok so I do it like the RA's. Thank you again very much!
|
|
