sykotic2002
Mid-Carder
Joined on: Nov 19, 2005 13:25:10 GMT -5
Posts: 158
|
Post by sykotic2002 on Aug 9, 2006 17:05:51 GMT -5
Sorry if this is a dumb questions. I want to take a torso off a figure and replace it with a different torso. Do you just snap the torso off or is there a way to take it off without breaking something?
|
|
|
|
Post by Mr. McCluer on Aug 9, 2006 17:25:49 GMT -5
boil it in hot water then split it a part
|
|
Deleted
Joined on: Nov 25, 2024 11:34:59 GMT -5
Posts: 0
|
Post by Deleted on Aug 9, 2006 17:55:24 GMT -5
Check the Custom Support FAQ. There's a link in there that takes you to cracking torsos.
|
|
|
|
Post by adralegre on Aug 10, 2006 1:48:19 GMT -5
Check the Custom Support FAQ. There's a link in there that takes you to cracking torsos. I used that FAQ and it worked after some practice. I don't recommend boiling the torso in hot water first because it becomes too soft and it's harder to split the torso apart. Two long, narrow screwdrivers are definitely a must-have to do the job right. |
|
