|
|
Post by Rated [R] NinJa on Jan 12, 2019 12:32:25 GMT -5
Not really a figure related question but it doesn’t need its own thread. I know a few of you use waterslide decals on your customs, do you think they’d be able to be applied onto trainers/sneakers?
|
|
Deleted
Joined on: Nov 27, 2024 8:45:33 GMT -5
Posts: 0
|
Post by Deleted on Jan 12, 2019 14:47:14 GMT -5
I have the E17 and it has the standard arm joints Thanks for confirming guys; it is the same for the Shane O Mac figures as well? I’m trying to find short sleeves to make a referee figure using a Ricardo/Fink BAF body. Hey m now thinking Bobby Hernan shoulders for the BAF connection and white shirt Shane for the sleeves and arms. It looks like it can connect there. I think that could work. |
|
stinkfaceT
Mid-Carder
Joined on: Jan 30, 2017 17:40:31 GMT -5
Posts: 476 
|
Post by stinkfaceT on Jan 12, 2019 14:52:39 GMT -5
Not really a figure related question but it doesn’t need its own thread. I know a few of you use waterslide decals on your customs, do you think they’d be able to be applied onto trainers/sneakers? They should work. Would need to be sealed on after with some sort of project finisher/sealer so they don’t rub off/breakdown right away. |
|
|
|
Post by Rated [R] NinJa on Jan 12, 2019 14:54:05 GMT -5
Not really a figure related question but it doesn’t need its own thread. I know a few of you use waterslide decals on your customs, do you think they’d be able to be applied onto trainers/sneakers? They should work. Would need to be sealed on after with some sort of project finisher/sealer so they don’t rub off/breakdown right away. Thank you! Yeah I usually tend to seal any stuff I paint etc, time to start experimenting *rubs hands* |
|
stinkfaceT
Mid-Carder
Joined on: Jan 30, 2017 17:40:31 GMT -5
Posts: 476
|
Post by stinkfaceT on Jan 12, 2019 17:16:36 GMT -5
Rated [R] NinJa I would imagine it would have to go on some leather/plastic/rubber surface of the shoe but should work.
|
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Jan 12, 2019 21:16:28 GMT -5
|
|
ChainGang
Superstar
Joined on: May 13, 2018 13:46:08 GMT -5
Posts: 694
|
Post by ChainGang on Jan 12, 2019 22:07:28 GMT -5
Nice. Who’s arms are those? |
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Jan 12, 2019 22:39:10 GMT -5
ChainGang - The biceps are from the Nitro Notables Scott Hall and the forearms are from a Four horsemen Ric Flair. Had to swap the forearms cause the combined arms were too long with the bigger shoulders.
|
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Jan 13, 2019 3:25:15 GMT -5
That fixup looks great. I think the shoulders on that particular figure are too big. I swapped the arms on mine with the best of pay per view Bret. Who’s lower legs did you use? |
|
|
|
Post by tarver89 on Jan 13, 2019 7:53:23 GMT -5
Labeled101 i missed your fix ups! Other than the Hall's shoulders and upper arms, i can spot upper legs swapped too, correct? Plus, new elbowpads.
|
|
|
|
Post by bababooey on Jan 13, 2019 11:27:16 GMT -5
They should work. Would need to be sealed on after with some sort of project finisher/sealer so they don’t rub off/breakdown right away. Thank you! Yeah I usually tend to seal any stuff I paint etc, time to start experimenting *rubs hands* Also it probably depends on the material of the part. Like I don’t see it working on a cloth, canvas, mesh, or parts that are super soft. But I think they should work on like a vinyl or leather type of part. Maybe even a rubber part. |
|
2sweeeeet
Main Eventer
Joined on: Jun 7, 2017 22:08:25 GMT -5
Posts: 2,089
|
Post by 2sweeeeet on Jan 13, 2019 11:38:44 GMT -5
Any advice or videos on how to paint the top portion of the crotch piece without torso cracking so that the previous color doesn't show up in certain pictures making it look like their underwear is showing?
|
|
Labeled101
Main Eventer
Mattel Ultimate Edition Enthusiast
Joined on: Jul 7, 2011 19:52:45 GMT -5
Posts: 1,531
|
Post by Labeled101 on Jan 13, 2019 12:22:17 GMT -5
GreyHaze:Big Bad Booty Daddy - They are from the Elite 66 Kurt Angle figure (except the boots; EG Kurt Angle) I had to cut the ankles to achieve the accurate height then add some random pegs from my inventory parts as the new boot connection point.   tarver89 - What’s good my brotha! Yup. The elbow pads were taken off Basic RRH Edge. The knee pads are off BOPPV Sheamus. Oh yeah and the hair was painted. Couldn’t handle that green hair.
|
|
|
|
Post by HandsomeHollywood on Jan 13, 2019 12:55:53 GMT -5
GreyHaze:Big Bad Booty Daddy - They are from the Elite 66 Kurt Angle figure (except the boots; EG Kurt Angle) I had to cut the ankles to achieve the accurate height then add some random pegs from my inventory parts as the new boot connection point. tarver89 - What’s good my brotha! Yup. The elbow pads were taken off Basic RRH Edge. The knee pads are off BOPPV Sheamus. Oh yeah and the hair was painted. Couldn’t handle that green hair. That young Angle fix-up is fantastic. May have sold me on picking up one of the million EG's at my TRU. I wonder if my Kozlov red elbow pads would work. I have 0 colored elbow pads. |
|
|
|
Post by Rated [R] NinJa on Jan 13, 2019 13:03:43 GMT -5
Thank you! Yeah I usually tend to seal any stuff I paint etc, time to start experimenting *rubs hands* Also it probably depends on the material of the part. Like I don’t see it working on a cloth, canvas, mesh, or parts that are super soft. But I think they should work on like a vinyl or leather type of part. Maybe even a rubber part. I’ll only be applying it to leather part, I doubt it would work on cloth etc either. |
|
|
|
Post by tarver89 on Jan 13, 2019 16:33:42 GMT -5
GreyHaze:Big Bad Booty Daddy - They are from the Elite 66 Kurt Angle figure (except the boots; EG Kurt Angle) I had to cut the ankles to achieve the accurate height then add some random pegs from my inventory parts as the new boot connection point. tarver89 - What’s good my brotha! Yup. The elbow pads were taken off Basic RRH Edge. The knee pads are off BOPPV Sheamus. Oh yeah and the hair was painted. Couldn’t handle that green hair. That young Angle fix-up is fantastic. May have sold me on picking up one of the million EG's at my TRU. I wonder if my Kozlov red elbow pads would work. I have 0 colored elbow pads. Kozlov's elbowpads would totally work 100%. |
|
|
|
Post by POOR-ly Cuyler on Jan 13, 2019 17:35:56 GMT -5
I’m super confused. Kurt came with red elbow pads. Why does he need replacements?
|
|
|
|
Post by TheChamp420 on Jan 13, 2019 17:39:03 GMT -5
Love this new Seth scan, doing a lot of swaps lately!  |
|
|
|
Post by theicwguy on Jan 13, 2019 18:05:13 GMT -5
Love this new Seth scan, doing a lot of swaps lately! I had the same idea in mind.😁 |
|
|
|
Post by tarver89 on Jan 13, 2019 19:24:32 GMT -5
I’m super confused. Kurt came with red elbow pads. Why does he need replacements? Kurt’s ones are smaller, Edge’s and Kozlov’s ones are a little bit bigger. |
|
![Rated [R] NinJa Avatar](http://storage.proboards.com/530008/avatar/IDIYNeRTVZulhCPXFiqx.png)
