ishreaper890
Mid-Carder
Joined on: Jan 9, 2016 10:37:43 GMT -5
Posts: 115
|
Post by ishreaper890 on Jul 12, 2020 11:29:50 GMT -5
has anyone tried to remove the paint off of the UE Balor and swapped some parts to make normal Finn? I did mine too, takes lot of time cause you shouldn't use nail polish remover..I used sand block
|
|
|
Post by Nivro™ on Jul 12, 2020 11:44:03 GMT -5
Is Ricoshet's Top Picks has the same height of this previous Elite? Im willing to bet it is. #spreadsheets
|
|
|
Post by ilikekqueen on Jul 12, 2020 13:55:12 GMT -5
Is Ricoshet's Top Picks has the same height of this previous Elite? Yes. E18 Sin Cara is a good fix but it’s a bit pricey
|
|
darkestknight
Superstar
Joined on: Dec 8, 2015 15:34:35 GMT -5
Posts: 526
|
Post by darkestknight on Jul 12, 2020 14:31:50 GMT -5
Question. Will putting a Bryan/Balor/Styles lower leg and boot on an Edge elite significantly affect the height?
|
|
RKOrton
Mid-Carder
Joined on: Mar 12, 2017 10:35:34 GMT -5
Posts: 371
|
Post by RKOrton on Jul 12, 2020 14:51:53 GMT -5
Is Ricoshet's Top Picks has the same height of this previous Elite? Im willing to bet it is. #spreadsheets Is Ricoshet's Top Picks has the same height of this previous Elite? Yes. E18 Sin Cara is a good fix but it’s a bit pricey What about Aleister Black Elite 73? same height problem like his previous one?
|
|
|
Post by PJ on Jul 12, 2020 15:24:06 GMT -5
Im willing to bet it is. #spreadsheets Yes. E18 Sin Cara is a good fix but it’s a bit pricey What about Aleister Black Elite 73? same height problem like his previous one? Yup
|
|
|
Post by ilikekqueen on Jul 12, 2020 17:14:54 GMT -5
Im willing to bet it is. #spreadsheets Yes. E18 Sin Cara is a good fix but it’s a bit pricey What about Aleister Black Elite 73? same height problem like his previous one? Also does anyone know a good height fix for him? The spiked boot peg fits big on D’Lo calves
|
|
Lucas Legacy
Mid-Carder
Joined on: May 1, 2020 21:45:56 GMT -5
Posts: 130
|
Post by Lucas Legacy on Jul 12, 2020 18:33:34 GMT -5
Has anyone used a Bret Hart to make an unmasked Juventud Guerrera?
|
|
|
Post by RuthlessFigs on Jul 12, 2020 19:39:58 GMT -5
What about Aleister Black Elite 73? same height problem like his previous one? Also does anyone know a good height fix for him? The spiked boot peg fits big on D’Lo calves I used Sami Zayn lower legs to fix my NXT Black.
|
|
WWE Common Terry
Main Eventer
Joined on: Dec 17, 2003 13:48:53 GMT -5
Posts: 3,803
|
Post by WWE Common Terry on Jul 12, 2020 20:27:27 GMT -5
Does anyone have a photo of the Elite Shanes with the jersey removed? Are there any other Elite with the t-shirt mold in white?
|
|
|
Post by Mr. #1derful 🇵🇸 on Jul 12, 2020 22:10:57 GMT -5
The pic is of the Elite 61 Shane white molded shirt torso. The Elite 50 Shane just has a painted torso. @ WWE Common Terry E50 Shane has the Sheamus torso cast in white. Don’t think anybody else has a white shirt torso.
|
|
|
Post by shanieomaniac on Jul 12, 2020 23:11:26 GMT -5
The pic is of the Elite 61 Shane white molded shirt torso. The Elite 50 Shane just has a painted torso. @ WWE Common Terry E50 Shane has the Sheamus torso cast in white. Don’t think anybody else has a white shirt torso. You know, I was wondering the other day if this is the reason that E61 Shane is so dang hard to find. Because it is certainly the worse of his two elites, but it's the only Elite with that shirt mold.
|
|
|
Post by BadGirlRyleigh on Jul 13, 2020 0:30:25 GMT -5
Question. Will putting a Bryan/Balor/Styles lower leg and boot on an Edge elite significantly affect the height? If you don’t change the calf yes because Edge has that s***ty two piece kickpad mold
|
|
jimfriend
Mid-Carder
Joined on: Jun 22, 2018 0:51:53 GMT -5
Posts: 373
|
Post by jimfriend on Jul 13, 2020 0:31:40 GMT -5
I think the APA have that shirt mold
|
|
|
Post by shanieomaniac on Jul 13, 2020 3:47:29 GMT -5
So with those blasted E65 swamping everywhere, I noticed something about the Ronda... and it led to this: I didn't think it was possible to improve on this figure, but I may have just. I don't know why they would include the gold paint apps on the Elite and not the Ultimate... unless there were two different jackets worn, one with the gold and one without. But the mold is literally exactly the same, so who knows. Personally, I like the added touch. (Oh, and the sleeve accents are just a bit of gold pen I added there. Nothing major. Took all of two seconds. I might go back and properly paint it later.)
|
|
|
Post by ilikekqueen on Jul 13, 2020 10:53:12 GMT -5
What’s the best sealer to use? I’ve tried Liquitex & Mod Podge and neither have really worked that much for me
|
|
|
Post by stc13 on Jul 13, 2020 13:15:28 GMT -5
What’s the best sealer to use? I’ve tried Liquitex & Mod Podge and neither have really worked that much for me I use Krylon Flat Crystal Clear for most figures. If I'm just sealing a small area, I'll use watered down Mod Podge. I also use the glossy Mod Podge on occasion if I need a glossy boot or something. As with most things, multiple thin coats usually works best for me.
|
|
kinnikuman
Main Eventer
Joined on: Feb 6, 2020 21:42:25 GMT -5
Posts: 4,674
|
Post by kinnikuman on Jul 13, 2020 15:03:25 GMT -5
Mr Super Clear
|
|
WWF Sim Fed
Superstar
Joined on: Feb 16, 2008 0:09:32 GMT -5
Posts: 724
|
Post by WWF Sim Fed on Jul 13, 2020 15:37:58 GMT -5
I think the APA have that shirt mold Agreed
|
|
|
Post by TheHitmanKid on Jul 13, 2020 17:21:17 GMT -5
Also does anyone know a good height fix for him? The spiked boot peg fits big on D’Lo calves I used Sami Zayn lower legs to fix my NXT Black. Good choice! Seems to work perfectly
|
|