rpthangs
Mid-Carder
Joined on: Jun 18, 2017 21:55:55 GMT -5
Posts: 84
|
Post by rpthangs on Apr 28, 2022 17:12:10 GMT -5
hmm the customs fb page has a big checklist and that was listed there but cant get a confirmation Just checked and E43 doesn’t have ball joints. damn ive been dooped then!!! just trying to find a very easy formula for an owen hart custom if anyone here has ideas
|
|
Billy Snorticus
Mid-Carder
Joined on: Jul 23, 2020 15:37:01 GMT -5
Posts: 333
|
Post by Billy Snorticus on Apr 28, 2022 17:55:34 GMT -5
The newest Warlord would work for Konnor. E16 Heath Slater, SummerSlam Edge, or a cheap Lost Legends HBK with a boot swap would do the trick for Viktor. Also E56 Anderson could work for Viktor but the leg molds aren't the exact same, as Anderson uses the thicker Cody/Ziggler legs. The height should be accurate though. Yes! Great tips, I appreciate it post pics if you make these. ascension are my fav team
|
|
xtremer18
Main Eventer
Joined on: Aug 15, 2013 19:03:56 GMT -5
Posts: 1,626
|
Post by xtremer18 on Apr 28, 2022 19:31:45 GMT -5
Are there any easy fix-ups to make a W. Morrisey elite in jeans?
The closest one that I can think of is the Network Spotlight Vince McMahon, but I'm hoping there's someone with blue jeans out there that's in scale.
Thanks!
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,492
|
Post by Thunder Chunky on Apr 28, 2022 19:39:23 GMT -5
Are there any easy fix-ups to make a W. Morrisey elite in jeans? The closest one that I can think of is the Network Spotlight Vince McMahon, but I'm hoping there's someone with blue jeans out there that's in scale. Thanks! The Nash from the four pack has taller jeans. He's wearing a shirt though, so you'd have to crack torsos.
|
|
xtremer18
Main Eventer
Joined on: Aug 15, 2013 19:03:56 GMT -5
Posts: 1,626
|
Post by xtremer18 on Apr 29, 2022 0:09:18 GMT -5
Are there any easy fix-ups to make a W. Morrisey elite in jeans? The closest one that I can think of is the Network Spotlight Vince McMahon, but I'm hoping there's someone with blue jeans out there that's in scale. Thanks! The Nash from the four pack has taller jeans. He's wearing a shirt though, so you'd have to crack torsos. Thank you so much!!
|
|
theungreatone
Mid-Carder
Joined on: Mar 16, 2019 19:18:24 GMT -5
Posts: 235
|
Post by theungreatone on Apr 29, 2022 18:45:01 GMT -5
The Nash from the four pack has taller jeans. He's wearing a shirt though, so you'd have to crack torsos. Thank you so much!! the crotch piece on that Nash is bigger than the usual ones and most torso’s won’t fit on it
|
|
xtremer18
Main Eventer
Joined on: Aug 15, 2013 19:03:56 GMT -5
Posts: 1,626
|
Post by xtremer18 on Apr 30, 2022 15:24:16 GMT -5
the crotch piece on that Nash is bigger than the usual ones and most torso’s won’t fit on it Thank you for the heads up! That Vince may be the route to go then. Thank you again!!
|
|
|
Post by Crossfit Jesus on Apr 30, 2022 17:12:52 GMT -5
Does anyone have tips on removing the shirt on cactus Jack elite 48?
|
|
|
Post by shanieomaniac on Apr 30, 2022 21:57:35 GMT -5
Can anyone direct me to a really good tutorial for swapping ball jointed legs? I think I finally figured out a recipe for that Kevin Steen but I've never swapped ball joints before.
|
|
|
Post by rKoNomad316 on Apr 30, 2022 23:18:36 GMT -5
Does anyone have tips on removing the shirt on cactus Jack elite 48? From a poster (stinkfacet) on this thread from a few years ago: “Pop the head off and the arms at the shoulders. Raise arms so the pegs point up, warm up body of figure In hot water and slide the shirt up and over shoulder pegs.”
|
|
|
Post by Crossfit Jesus on Apr 30, 2022 23:18:57 GMT -5
Does anyone have tips on removing the shirt on cactus Jack elite 48? From a poster (stinkfacet) on this thread from a few years ago: “Pop the head off and the arms at the shoulders. Raise arms so the pegs point up, warm up body of figure In hot water and slide the shirt up and over shoulder pegs.” Ty ur the best
|
|
booberrysm
Mid-Carder
Joined on: Jan 26, 2016 14:08:26 GMT -5
Posts: 264
|
Post by booberrysm on May 1, 2022 11:23:40 GMT -5
Can anyone direct me to a really good tutorial for swapping ball jointed legs? I think I finally figured out a recipe for that Kevin Steen but I've never swapped ball joints before. Good luck!
|
|
Billy Snorticus
Mid-Carder
Joined on: Jul 23, 2020 15:37:01 GMT -5
Posts: 333
|
Post by Billy Snorticus on May 1, 2022 14:38:01 GMT -5
has anyone put these big show arms (including the shoulders) on one of his older elites? would it work?
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,492
|
Post by Thunder Chunky on May 1, 2022 16:21:56 GMT -5
Worked on this Mankind this afternoon. Which arms should I go with? The Shane arms or the arms it came with? I'm having a hard time deciding. The shirt isn't glued in place yet, so that's why it looks weird on the left side.
|
|
|
Post by rastlinfigures on May 3, 2022 15:28:16 GMT -5
|
|
xtremer18
Main Eventer
Joined on: Aug 15, 2013 19:03:56 GMT -5
Posts: 1,626
|
Post by xtremer18 on May 4, 2022 9:12:06 GMT -5
Has anyone in the states ever bought a painted head from Headeration before?
If so, do you recall the turnaround time for its delivery?
Thank you so very much for your time and help!
|
|
|
Post by Fighter Hayabusa on May 4, 2022 15:25:15 GMT -5
Anyone else come with brown cowboy boots other than Commissioner Michaels?
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,492
|
Post by Thunder Chunky on May 4, 2022 16:39:30 GMT -5
Anyone else come with brown cowboy boots other than Commissioner Michaels? RSC ECW Cactus.
|
|
|
Post by Glorydaysofwrestling on May 4, 2022 18:37:28 GMT -5
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,492
|
Post by Thunder Chunky on May 4, 2022 21:26:22 GMT -5
Made this Al Snow with a bunch of spare parts. I think it was a Shane torso, and Bo Dallas arms and legs, and a random crotch piece. It's probably too tall and the head too large, but for a bunch of spare parts I think it looks alright. I might get some decals for it later.
|
|