Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 11, 2016 20:39:18 GMT -5
I just got my elite Finn balor and i can't get his arms to bend because they won't bend in at the elbows . I don't want to snap the darn arm off .... Is there a reason for this ? Has this ever happened to you ?
|
|
ellisd
Main Eventer
Joined on: May 26, 2009 0:30:49 GMT -5
Posts: 4,758
|
Post by ellisd on Apr 11, 2016 20:41:45 GMT -5
Mine was the same way. Heat them up with a hair dryer and then try to move them.
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 11, 2016 20:43:39 GMT -5
Ok I'll try that ,did that work for you ?
|
|
|
Post by The Outsider on Apr 11, 2016 20:44:47 GMT -5
My Godfather did that. It's the deco in that area. Godfather's was tat work, Finn's would be his paint app.
|
|
ellisd
Main Eventer
Joined on: May 26, 2009 0:30:49 GMT -5
Posts: 4,758
|
Post by ellisd on Apr 11, 2016 20:46:14 GMT -5
Yeah, I had to heat them up to get them soft and it still took a little effort but they finally popped loose and would move after that. I think the paint caused it to stick.
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 11, 2016 20:57:03 GMT -5
I just blow dried it for like a minute and then i put a lot a stress into trying to get em to bend and no luck . Is it ok if I blow dry em for longer ? Blow dryer won't wreck anything on the figure right ?
|
|
|
Post by Chewdeezy on Apr 11, 2016 21:12:13 GMT -5
Boil a cup of water for like a minute and then dip it for a few minutes and it should be soft, then bend.
|
|
|
Post by RybackV1 on Apr 11, 2016 23:11:36 GMT -5
I saw ringside had a broken one like that for sale Actually. Damn. Really hope mine doesn't come in like that.
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 12, 2016 14:16:13 GMT -5
Boil a cup of water for like a minute and then dip it for a few minutes and it should be soft, then bend. That worked ! Thank you so much !
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 12, 2016 15:15:48 GMT -5
Mine should arrive today from tru so hopefully I wont run into this issue but im sure it is the paint
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 12, 2016 15:31:21 GMT -5
Mine should arrive today from tru so hopefully I wont run into this issue but im sure it is the paint Yeah and at least you can know that the hot water trick works !
|
|
|
Post by PJ on Apr 12, 2016 15:34:12 GMT -5
Just use a little force and it'll be fine.
|
|
|
Post by The Mask of Truth on Apr 12, 2016 20:36:51 GMT -5
Put it in the oven for 20 minutes. The whole elbow will melt back into place. Problem solved.
|
|
davey
Superstar
Joined on: Mar 24, 2015 12:40:19 GMT -5
Posts: 733
|
Post by davey on Apr 13, 2016 0:19:56 GMT -5
My Finn elbow also didnt move.
You know what I did used something called elbow grease and got it unstuck because of the paint.
Didnt need google or to call the fire department or make a topic.
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 13, 2016 1:05:11 GMT -5
My Finn elbow also didnt move. You know what I did used something called elbow grease and got it unstuck because of the paint. Didnt need google or to call the fire department or make a topic. Good for you buddy . If I put any more stress on the figure the arm would have broken off . Is it really necessary that 99% of people online are sarcastic pricks ?
|
|
|
Post by RybackV1 on Apr 13, 2016 1:59:04 GMT -5
Yay my Finn came perfect !
|
|
|
Post by PJ on Apr 13, 2016 6:04:56 GMT -5
This applies to whether you heat the parts or not. If you held the figure by the upper are and then put a little force to bending the elbow joint the arm wouldn't have any stress on the shoulder to risk breaking. When working a stuck/tight joint also hold the two closest parts to the articulation point. Example if it is a stuck elbow you hold the upper arm and forearm so all the stress/force will be focused on the elbow. Just so you know for future reference.
|
|
Deleted
Joined on: Sept 29, 2024 23:20:27 GMT -5
Posts: 0
|
Post by Deleted on Apr 13, 2016 12:32:26 GMT -5
The hot water always works for me.
|
|
gawd6sic6™
Main Eventer
" I cross the lines you love to hate "
Joined on: Jan 13, 2009 13:50:08 GMT -5
Posts: 4,868
|
Post by gawd6sic6™ on Apr 13, 2016 12:57:40 GMT -5
My Finn elbow also didnt move. You know what I did used something called elbow grease and got it unstuck because of the paint. Didnt need google or to call the fire department or make a topic. Good for you buddy . If I put any more stress on the figure the arm would have broken off . Is it really necessary that 99% of people online are sarcastic pricks ? Some people are sarcastic pricks just to do it. Others are tired of seeing the same stuff over and over and over and over. Some, like myself are always astonished at how many things are asked that can be answered with 2 minutes of searching on the internet.
|
|
|
Post by cmiller79 on Apr 13, 2016 15:11:28 GMT -5
My Finn elbow also didnt move. You know what I did used something called elbow grease and got it unstuck because of the paint. Didnt need google or to call the fire department or make a topic. Is it really necessary that 99% of people online are sarcastic pricks ? yes it is On here its like rookie hazing If you can last your in for good
|
|