dizneyfist
Superstar
Joined on: Jul 27, 2006 22:34:48 GMT -5
Posts: 742
|
Post by dizneyfist on Jan 7, 2017 3:10:46 GMT -5
I recently received my S.H.FIGUARTS WWE The Rock and SCSA set and as I'm adjusting to new articulation I'm liking them more and more each day. However my Rock figure has a loose hip joint piece that connect directly to the thigh and because of this it seems to put a strain on the hip peg and I don't want to break it. What should I do or who should I contact to fix this problem? Pictures to come!
|
|
Deleted
Joined on: Nov 28, 2024 2:56:06 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2017 14:40:25 GMT -5
Quite the tricky situation... I would suggest super glue but the S.H figures are quite expensive. Maybe contact the supplier and see if you can get something done? An exchange maybe?
|
|
|
|
Post by mrhoss on Jan 7, 2017 15:46:41 GMT -5
I'm not quite sure what is causing the problem. Is the hip piece not moving well on the ball joint. I used some heat from a hair dryer and then dabbed some oil on the joints to get the legs to work better. Mine were making squeaking sounds like they were too tight and I also felt like it could stress the peg. I'm going to toss out a couple things that might help you or someone else: Sometimes the joints are really tight and could use a dab of oil. Watch the youtube video or google "oiling Sh Figuarts joints". If you do this, do not use WD-40 or anything with petroleum. It could mess up the paints or ruin the plastic. I got 100 % silicone shock oil that is used for RC Cars, exactly as shown in the video. The higher the ##w tells you how thick the oil is. I think 80w is the thickest  These figures can be taken a part pretty easily. Some heat will help make it easier.  |
|
dizneyfist
Superstar
Joined on: Jul 27, 2006 22:34:48 GMT -5
Posts: 742
|
Post by dizneyfist on Jan 7, 2017 19:20:26 GMT -5
Thank you guys so much for your responses and help. I actually put some wahl shaver oil and it helped but I was too late as the peg broke but I didn't realize you could take apart the figures in that manner. Fortunately my SCSA was saved from the same predicament as the peg on the left legs are very tight.
|
|
|
|
Post by mrhoss on Jan 8, 2017 19:31:26 GMT -5
I hope you can get a refund or exchange. I'm not sure if it's possible to contact Bandai or Tamashii for the part that broke, then you could reassemble it.
|
|
dizneyfist
Superstar
Joined on: Jul 27, 2006 22:34:48 GMT -5
Posts: 742
|
Post by dizneyfist on Jan 12, 2017 13:05:50 GMT -5
I hope you can get a refund or exchange. I'm not sure if it's possible to contact Bandai or Tamashii for the part that broke, then you could reassemble it. I contacted bluefin Corp but no response. I'll try Tamashii Nations next. |
|
