themattdudley
Mid-Carder
Joined on: Sept 2, 2017 2:34:54 GMT -5
Posts: 109 
|
Post by themattdudley on Mar 5, 2019 16:04:23 GMT -5
Why does target app sell out of Ruby so quick
|
|
|
|
Post by Crossfit Jesus on Mar 5, 2019 16:05:10 GMT -5
Why does target app sell out of Ruby so quick my target has 6 on the pegs |
|
|
|
Post by PJ on Mar 5, 2019 16:15:27 GMT -5
I mentioned that to him the other day but he wasn’t able to get down there, but that was also the day I was taking Andrea to her doctor’s appointment and couldn’t get up there to get them. But it worked out in the end because he said you helped him. Yes. I picked them up and hand delivered them to him to his home, same day. He didn't have to go more than 8 feet from his door to get them. I then went to bed and woke up with a wicked charley horse in my leg. True story.
Oh sure he gets hand delivered same day service! I get package in the mail that instead of just goes the 25 minutes to my house decides to take the scenic route and travel the whole east coast and still end up two blocks away!!! lol That Charlie horse was a Pin into the voodoo doll I made! Seriously though you cased the place? You know where he keeps his Sting collection?  |
|
|
|
Post by theicwguy on Mar 5, 2019 16:33:51 GMT -5
Why does target app sell out of Ruby so quick my target has 6 on the pegs Really that's crazy? I thot she would sell pretty well and Dain would be the warmer. |
|
|
|
Post by Crossfit Jesus on Mar 5, 2019 16:34:25 GMT -5
my target has 6 on the pegs Really that's crazy? I thot she would sell pretty well and Dain would be the warmer. I think there are 7 dains. She’s doing better than. Him |
|
|
|
Post by theicwguy on Mar 5, 2019 16:36:33 GMT -5
Really that's crazy? I thot she would sell pretty well and Dain would be the warmer. I think there are 7 dains. She’s doing better than. Him Haha Dain and his mudflaps. |
|
Deleted
Joined on: Nov 23, 2024 15:44:46 GMT -5
Posts: 0
|
Post by Deleted on Mar 5, 2019 16:58:02 GMT -5
Does it seem like Mattel is trying to “fix” or standardize figure heights and proportions these days? I wonder if that’s why there seem to be shorter figures of taller individuals, like AB. In the past, I feel like many figures suffered from disproportionately long legs (ie any Taker figure ever). Don’t get me wrong, I love my Taker figures, but he sure is long-legged in figure form.
|
|
|
|
Post by Lorenzo Alcazar on Mar 5, 2019 17:05:14 GMT -5
Seriously though you cased the place? You know where he keeps his Sting collection? Unfortunately, no. I was too busy being hugged and spun around his driveway in several circles, then after I was put down and staggering from my dizziness he was too busy pumping his fist chanting "USA! USA! USA!" as he walked back into his house. I went to inquire about it he slammed the door in my face and turned off the outside light. I was going to let you in the house but my wife assumed this was a set up and I was going to be murdered lol She was like "WHAT?!?! Why is somebody from a message board driving toys to our house? This is how you end up cut into little pieces and they make a Law & Order about you". In was like honey , don't worry, I trust him. We've been discussing your cervix for weeks in PMs. |
|
|
|
Post by Xæro #FakeCollector on Mar 5, 2019 17:11:45 GMT -5
I have to admit, it's pretty damn cool to see folks on here actually helping others get the figures.
|
|
|
|
Post by RuthlessFigs on Mar 5, 2019 20:43:51 GMT -5
Does it seem like Mattel is trying to “fix” or standardize figure heights and proportions these days? I wonder if that’s why there seem to be shorter figures of taller individuals, like AB. In the past, I feel like many figures suffered from disproportionately long legs (ie any Taker figure ever). Don’t get me wrong, I love my Taker figures, but he sure is long-legged in figure form. It seems like they're doing anything but fixing heights. Aleister Black, Adam Cole & Kyle O'Reilly should not be the same height as Daniel Bryan... It's just being lazy by using the same body for every guy that isn't jacked, and even they aren't safe as Mattel decided to give Cedric a Bryan body. Even worse, Samoa Joe Elite 64 is about the same height as Bryan... huh? It's going to suck if the majority of figures are going to come out looking 5'7. |
|
Deleted
Joined on: Nov 23, 2024 15:44:46 GMT -5
Posts: 0
|
Post by Deleted on Mar 5, 2019 20:55:46 GMT -5
Does it seem like Mattel is trying to “fix” or standardize figure heights and proportions these days? I wonder if that’s why there seem to be shorter figures of taller individuals, like AB. In the past, I feel like many figures suffered from disproportionately long legs (ie any Taker figure ever). Don’t get me wrong, I love my Taker figures, but he sure is long-legged in figure form. It seems like they're doing anything but fixing heights. Aleister Black, Adam Cole & Kyle O'Reilly should not be the same height as Daniel Bryan... It's just being lazy by using the same body for every guy that isn't jacked, and even they aren't safe as Mattel decided to give Cedric a Bryan body. Even worse, Samoa Joe Elite 64 is about the same height as Bryan... huh? It's going to suck if the majority of figures are going to come out looking 5'7. Yeah, if they’re making all of these taller guys the same height as Bryan, then they need an even smaller buck to use with shorter guys like Bryan. Perhaps a shorter set of lower legs could accomplish this without too much new tooling. |
|
|
|
Post by PJ on Mar 5, 2019 21:11:01 GMT -5
As great as the Black is especially after correcting the heigh it’s already outdated and I now wonder how long until we get an updated Black with those two tattoos on his stomach that the NXT figure is missing. |
|
|
|
Post by finnbalor1 on Mar 5, 2019 22:21:32 GMT -5
Why does target app sell out of Ruby so quick my target has 6 on the pegs I went out of town over the weekend and I know I at least seen 12 Ruby's on the pegs and probably close to 8-9 Dains, they're sitting around this early I hate to see in couple months all we gonna see is pegs full of Ruby,Dain,Shower Rusev and Romans. |
|
|
|
Post by Ember's Flame on Mar 5, 2019 22:27:59 GMT -5
I got a Ruby today through the app! Been a few days since I got a notif about Drew or AB.
|
|
Henchmen4Hire
Main Eventer
Joined on: Jan 12, 2016 23:48:35 GMT -5
Posts: 1,311
|
Post by Henchmen4Hire on Mar 5, 2019 22:49:06 GMT -5
There's very likely still a Dain and Ruby at the La Brea, CA Target, along with a Rusev and Roman. Stock hasn't changed from 4 in like a week.
|
|
Deleted
Joined on: Nov 23, 2024 15:44:46 GMT -5
Posts: 0
|
Post by Deleted on Mar 5, 2019 23:25:22 GMT -5
As great as the Black is especially after correcting the heigh it’s already outdated and I now wonder how long until we get an updated Black with those two tattoos on his stomach that the NXT figure is missing. It’ll probably be outdated again by the time there’s a figure with the two new tats. He’s still got a little real estate left. But I have a feeling Black won’t get figures too often because of the tats. His figures will seem very lacking if they’re anything other than Elite, and that requires quite a few colors and printing on nearly every surface. Mattel should do an Entrance Greats figure for him. Higher cost and they’ll sell like crazy. |
|
Edge Sangral
Mid-Carder
Joined on: Feb 11, 2019 17:21:57 GMT -5
Posts: 230
|
Post by Edge Sangral on Mar 6, 2019 2:09:54 GMT -5
I figured out what was bothering me about the Aleister figure; it's too short. The Daniel Bryan fig uses the same parts, he's 5-10 and Black is supposed to be 6-0 so I wasn't having it. The Black fig's head rests too low, giving it mild stumpy neck syndrome, so I carved away some material from inside the head so I can slide it up more. This added about 3mm to 4mm in height, which makes me like it a lot more. These pics have the head raised.   Yoshi Tatsu is 6-1. Tatsu uses thighs that are 5mm longer, the head also rests high on the neck peg, making the fig way too tall. If it used the DB/AB thighs it would be the right size (maybe this thigh didn't exist back then). The two styles of kickpads are the same height. With the raised head, the AB fig goes from "short" to "acceptable". Now it fits in more or less. I think adding a 1mm to 2mm piece of styrene to the boot soles would make it perfect. The DB fig also needs like 2mm shaved off the soles.  Forget the height difference, where the heck is his hand tattoo on his chest? Noticed that on all your photos.  |
|
Henchmen4Hire
Main Eventer
Joined on: Jan 12, 2016 23:48:35 GMT -5
Posts: 1,311
|
Post by Henchmen4Hire on Mar 6, 2019 2:49:03 GMT -5
The fig hasn't had time to go get the tattoo yet, cripes.
|
|
|
|
Post by Controversial Maverick PUNK on Mar 6, 2019 13:28:09 GMT -5
Maybe someone can make decals of those two new tats, Black has. Not much space for him to get more ink, anyway.
|
|
wrestlingfan0815
Main Eventer
Joined on: Mar 28, 2018 15:26:43 GMT -5
Posts: 3,903
|
Post by wrestlingfan0815 on Mar 6, 2019 14:11:23 GMT -5
I figured out what was bothering me about the Aleister figure; it's too short. The Daniel Bryan fig uses the same parts, he's 5-10 and Black is supposed to be 6-0 so I wasn't having it. The Black fig's head rests too low, giving it mild stumpy neck syndrome, so I carved away some material from inside the head so I can slide it up more. This added about 3mm to 4mm in height, which makes me like it a lot more. These pics have the head raised. Yoshi Tatsu is 6-1. Tatsu uses thighs that are 5mm longer, the head also rests high on the neck peg, making the fig way too tall. If it used the DB/AB thighs it would be the right size (maybe this thigh didn't exist back then). The two styles of kickpads are the same height. With the raised head, the AB fig goes from "short" to "acceptable". Now it fits in more or less. I think adding a 1mm to 2mm piece of styrene to the boot soles would make it perfect. The DB fig also needs like 2mm shaved off the soles. Forget the height difference, where the heck is his hand tattoo on his chest? Noticed that on all your photos. that must be an error because other ones I’ve seen have had the hand tattoo on his chest. |
|
