|
Post by JokerFC on Mar 16, 2019 11:08:08 GMT -5
Does anybody think these 2 figs will ever get a re-release in the main line? Maybe with some minor tweaks?
I mean..2002/2003 Kane could come without the removable mask, chains etc to make him a lot different. I'm not so sure what could be done with 2000/02 Kane? but the 2nd market prices for these 2 are absolutely mental....
|
|
|
Post by Rock-Is-King on Mar 16, 2019 11:28:34 GMT -5
Not sure about the 2000-02 Kane as I don’t own that one but even if there was a re-release of the 2002-03 figure it wouldn’t have the same value as most perceive the original to have because it was an exclusive to Ringside which means probably less of it was made than there would be with a re-release unless it was an exclusive also....And your correct about the secondary prices being huge....makes me very glad I got mine from Ringside when it was first released & kept it Moc
|
|
Deleted
Joined on: Apr 27, 2024 14:56:33 GMT -5
Posts: 0
|
Post by Deleted on Mar 16, 2019 11:34:56 GMT -5
They could do an all red inverted colours 00-02 Kane plus the all black/transparent one and the one with the red flames and see through bits colour switch. Most of all though, it would need a new mask mould as the current sucks ass.
The 02/03 one should remain an exclusive but a basic version wouldn’t go amiss with red keenpads.
|
|
|
Post by stc13 on Mar 16, 2019 11:37:34 GMT -5
They could release the 2000 Kane as the 2001 Survivor Series color swap he wore with black flames/red top. I think it's likely one or both get some kind of repaint/re-release at some point. His in-ring career is just about over, he's a figure that sells well, and Mattel have already made most of his attires.
|
|
|
Post by BadGirlRyleigh on Mar 16, 2019 11:47:55 GMT -5
2002 Kane should be made with a mask that isn’t removable and have his goatee and knee pads
|
|
|
Post by Chewdeezy on Mar 16, 2019 12:18:07 GMT -5
Bigger torso please!
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Mar 16, 2019 12:55:22 GMT -5
I own both figures and they’re good, but could be way better imo. The 2000-/2001 Kane needs a unique body mold. This dude was a tank, the torso they gave him is way too thin and could benefit from having molded mesh like the jakks r3 (which to this day is still one of the best Kane figures produced). The mask needs to be updated and redone. Kane’s mask was much narrower, rather than wide like mattel made theirs. Last but not least, Mattel needs to make a laceless boot mold. They’ve been avoiding it for a while, undertaker and Kane wore laceless boots for some periods of their career... The 2003 Kane could have a molded mask this time around, molded details like the straps/mesh and have unique kneepads. A bigger torso is definetly needed as well. Mattel made the excuse of saying that they couldn’t mold such details on his attire because it would hinder articulation, but that does not stop them from molding on the ministry undertakers and other countless figures. I would buy these two in a heartbeat.
|
|
|
Post by aggressiveperfectpoor on Mar 16, 2019 13:52:27 GMT -5
Why if you have ANY thoughts that "You know, I might want this figure" with a RSC exclusive, you pull the trigger. Because Time and time again you see what happens when they dry up on RSC and are only available on the secondary market. They become like SDCC Marvel Legends.
|
|
bharrisfan
Main Eventer
Joined on: Oct 10, 2010 1:00:19 GMT -5
Posts: 2,041
|
Post by bharrisfan on Mar 16, 2019 14:17:31 GMT -5
i didnt buy either because i dont like kane. and they should rerelease them. mattel did a good job of pumping out another ringside stone cold, cactus jack...and then some others that shot up like vader.
orndorff has gotten crazy. he should get a white or red trunked elite.
|
|
|
Post by aggressiveperfectpoor on Mar 16, 2019 14:28:45 GMT -5
i didnt buy either because i dont like kane. and they should rerelease them. mattel did a good job of pumping out another ringside stone cold, cactus jack...and then some others that shot up like vader. orndorff has gotten crazy. he should get a white or red trunked elite. Should they put out the figures because you decided not to get them the first time and are having remorse? The great thing about Ringside exclusives, is they have things that make them exclusives. Sure, release a 2002-2003 Kane with a mask that can't be removed, all for it, but the removable mask and hair and differently painted headscan kind of helped make that figure unique.
|
|
bharrisfan
Main Eventer
Joined on: Oct 10, 2010 1:00:19 GMT -5
Posts: 2,041
|
Post by bharrisfan on Mar 16, 2019 14:35:24 GMT -5
i didnt buy either because i dont like kane. and they should rerelease them. mattel did a good job of pumping out another ringside stone cold, cactus jack...and then some others that shot up like vader. orndorff has gotten crazy. he should get a white or red trunked elite. Should they put out the figures because you decided not to get them the first time and are having remorse? The great thing about Ringside exclusives, is they have things that make them exclusives. Sure, release a 2002-2003 Kane with a mask that can't be removed, all for it, but the removable mask and hair and differently painted headscan kind of helped make that figure unique. What are you talking about. I didn’t say I had remorse. I didn’t buy it then and I wouldn’t buy any now. It would be nice for those who missed out. Don’t come for me
|
|
Deleted
Joined on: Apr 27, 2024 14:56:33 GMT -5
Posts: 0
|
Post by Deleted on Mar 16, 2019 14:43:12 GMT -5
Hopefully not, no more rereleases please
|
|
Rattlehead
Main Eventer
WF 10 Year Member
Destruction can be beautiful!
Joined on: Apr 30, 2013 21:30:51 GMT -5
Posts: 3,332
|
Post by Rattlehead on Mar 16, 2019 15:57:59 GMT -5
The hardcore Kane could be released in reversed red and black or all black that he briefly wore.
The only Kane I do want at this point is double sleeve elite or the 1999 attire with the mesh flame design on his chest.
|
|
Deleted
Joined on: Apr 27, 2024 14:56:33 GMT -5
Posts: 0
|
Post by Deleted on Mar 16, 2019 16:19:59 GMT -5
Haha, most of us are talking about re paints tbh, the only people who don’t want them re-released are the ones who are either selling them for £150+ or are thinking of selling them in future. Pathetic really.
|
|
|
Post by mcfclee on Mar 16, 2019 16:25:47 GMT -5
I’ve got both but as always if collectors want the figures they should find a way to get it to them. Anybody who cares about a figures value thinks about the hobby differently to me anyway.
|
|
|
Post by RuthlessFigs on Mar 16, 2019 19:17:49 GMT -5
I really want them to re-release the 'Hardcore' Kane and make a chase being his Survivor Series 2001 attire. Also would love an accurate 2002/2003 Kane, with the mask sculpted on.
|
|
|
Post by One Punch Reigns on Mar 16, 2019 19:50:47 GMT -5
2000-2002 Kane I think is a distinct possibility. I could see them inverting his colors and including another accessory/interchanging hands as opposed to the Hardcore belt.
2002-2003 Kane could use some differences like a new scan with a nonremovable mask and a goatee and include the shackles from the original release. Cosmetically I'm not sure what they could do beyond a new head.
|
|
juicexct
Mid-Carder
Joined on: Feb 10, 2019 8:01:07 GMT -5
Posts: 216
|
Post by juicexct on Mar 17, 2019 6:46:10 GMT -5
Wouldn’t mind a hardcore kane repaint or rerelease.
|
|
|
Post by BadGirlRyleigh on Mar 17, 2019 9:41:34 GMT -5
Survivor Series 2001 Kane with No Way Out 2001 chase variant
|
|
hbkfan
Superstar
Joined on: Nov 25, 2011 8:00:29 GMT -5
Posts: 503
|
Post by hbkfan on Mar 17, 2019 11:03:12 GMT -5
Totally. Tired of these wrestlers with thin body types they never sported.
|
|