kingofcoil
Jobber
Joined on: Jul 20, 2019 13:10:22 GMT -5
Posts: 3
|
Post by kingofcoil on Apr 7, 2020 9:34:55 GMT -5
Hi all, I remembered there were some very special Velcro t-shirts made and came with some WWE Elite figures.
One of them comes with an Elite Daniel Bryan which has no velcros at all, you basically put it on the figure like a real t-shirt
While most have velcros at the back of the t-shirts, there is also this that I've seen but forgotten which had the velcro at the side.
It was either on the left or right, but I'm more inclined its towards the left. The velcros stretches from the bottom on the left side towards under the pits area.
Does anyone remembers which one or can probably name me the series or a picture here? Thanks again so much!
|
|
HandsomeHollywood
Main Eventer
Joined on: Mar 6, 2005 20:55:01 GMT -5
Posts: 4,893
Member is Online
|
Post by HandsomeHollywood on Apr 7, 2020 10:03:33 GMT -5
What you describe sounds a lot like the Toy Fair exclusive Jakks Cactus Jack. That had the velcro on the side from the bottom of the shirt to the armpit on his right side. The same type of shirt can also be seen on CS17 Eddie Guerrero's "I'm Your Papi" t-shirt.
If it's not that then I have no clue. I have no memory of the Bryan shirt you speak of either.
|
|
Medieval
Main Eventer
@mattelwwe_medieval
Joined on: Jan 22, 2015 12:46:43 GMT -5
Posts: 4,638
|
Post by Medieval on Apr 7, 2020 17:53:18 GMT -5
There is no Daniel Bryan made by Mattel that is like that. The only Mattel figure with a pull over shirt without Velcro that I know of comes with Akeem.
|
|
mrtheiphonekid
Mid-Carder
Joined on: May 23, 2013 6:36:11 GMT -5
Posts: 408
|
Post by mrtheiphonekid on Apr 7, 2020 18:08:36 GMT -5
There is no Daniel Bryan made by Mattel that is like that. The only Mattel figure with a pull over shirt without Velcro that I know of comes with Akeem. Elite 6 Shad has a sleeveless shirt with no velcro.
|
|
|
Post by BadGirlRyleigh on Apr 7, 2020 21:06:14 GMT -5
There is no Daniel Bryan made by Mattel that is like that. The only Mattel figure with a pull over shirt without Velcro that I know of comes with Akeem. Elite 6 Shad has a sleeveless shirt with no velcro. And DM Cena
|
|
Medieval
Main Eventer
@mattelwwe_medieval
Joined on: Jan 22, 2015 12:46:43 GMT -5
Posts: 4,638
|
Post by Medieval on Apr 7, 2020 22:09:27 GMT -5
Ah dam I forgot about Cena and Shad. I have both of them to. But yeah no Daniel Bryan.
|
|
|
Post by kennyw86v2 on Apr 7, 2020 22:22:54 GMT -5
What you're thinking of is most likely a custom shirt.
I bought several years back for seth Rollins, cm punk and scsa.
|
|
|
Post by johnnyb on Apr 9, 2020 0:15:51 GMT -5
The JAKKS CS Wolfpac Hogan had a shirt like you're describing too. I really wish that was how they designed all of their shirts.
|
|
|
Post by JC Motors on Apr 9, 2020 11:14:28 GMT -5
It must have been a custom shirt
|
|
|
Post by BadGirlRyleigh on Apr 9, 2020 13:38:35 GMT -5
The JAKKS CS Wolfpac Hogan had a shirt like you're describing too. I really wish that was how they designed all of their shirts. No the Wolfpac Hogan shirt had Velcro on the side. The TNA ToyBiz Eric Young had a shirt with no Velcro tho
|
|
|
Post by johnnyb on Apr 9, 2020 14:17:12 GMT -5
The JAKKS CS Wolfpac Hogan had a shirt like you're describing too. I really wish that was how they designed all of their shirts. No the Wolfpac Hogan shirt had Velcro on the side. The TNA ToyBiz Eric Young had a shirt with no Velcro tho OP literally described the Hogan shirt, word-for-word.
|
|
HandsomeHollywood
Main Eventer
Joined on: Mar 6, 2005 20:55:01 GMT -5
Posts: 4,893
Member is Online
|
Post by HandsomeHollywood on Apr 9, 2020 14:48:37 GMT -5
The JAKKS CS Wolfpac Hogan had a shirt like you're describing too. I really wish that was how they designed all of their shirts. The problem to me with the velcro side shirts Jakks used to make, at least with my Cactus and Eddie, is they ended up looking like sleeveless turtlenecks. I remember the neck of the shirt being very thick. Mattel would be able to do this style justice with a regular neck line.
|
|
|
Post by JC Motors on Apr 9, 2020 16:28:03 GMT -5
The Jakks Rocky Clubber Lang in street gear had a black tank top that wasn't held together by Velcro.
|
|
GoCanes84
Main Eventer
Joined on: May 6, 2008 11:03:44 GMT -5
Posts: 1,086
|
Post by GoCanes84 on Apr 9, 2020 19:41:50 GMT -5
Is this being discussed because of the new Rock UE t-shirt? Looks perfect for a shirt in the renderings we’ve seen.
|
|