|
|
Post by bababooey on Feb 9, 2021 14:09:13 GMT -5
I got a question and I’m not sure if it belongs here or not but my MJF has a VERY loose ab swivel (I guess you call it that) and I am not sure how to tighten it. I popped off the ball jointed ab and put some clear nail polish and even a coat of mod podge around the ball joint and the torso insert but that’s not quite doing the trick. Any tips or help would be extremely appreciated. I would really like to salvage this figure without having to track down another I’m having the same issue. I haven’t tried it yet, but I’m considering rubbing some Vaseline on the peg, then filling the joint with some hot glue. Because of the Vaseline, the glue won’t stick to the peg, but it should make like a semi-flexible cap in the joint. |
|
|
|
Post by World Champion Randy Orton on Feb 9, 2021 15:32:37 GMT -5
I got a question and I’m not sure if it belongs here or not but my MJF has a VERY loose ab swivel (I guess you call it that) and I am not sure how to tighten it. I popped off the ball jointed ab and put some clear nail polish and even a coat of mod podge around the ball joint and the torso insert but that’s not quite doing the trick. Any tips or help would be extremely appreciated. I would really like to salvage this figure without having to track down another I’m having the same issue. I haven’t tried it yet, but I’m considering rubbing some Vaseline on the peg, then filling the joint with some hot glue. Because of the Vaseline, the glue won’t stick to the peg, but it should make like a semi-flexible cap in the joint. That’s a helluva an idea, I would have never thought of that. If you try it, let me know how it goes. Another idea I had was if I wrap those rubber bands used for braces or the plastic bands that come with the elites and wrap it around the peg and then stick it in the joint. |
|
|
|
Post by bababooey on Feb 9, 2021 15:47:16 GMT -5
I’m having the same issue. I haven’t tried it yet, but I’m considering rubbing some Vaseline on the peg, then filling the joint with some hot glue. Because of the Vaseline, the glue won’t stick to the peg, but it should make like a semi-flexible cap in the joint. That’s a helluva an idea, I would have never thought of that. If you try it, let me know how it goes. Another idea I had was if I wrap those rubber bands used for braces or the plastic bands that come with the elites and wrap it around the peg and then stick it in the joint. So I haven’t tried it on the MJF figure, but I have done it on a bunch of NECA and McFarlane figures before and it works. The other positives are that excess is easy to trim, and if you screw up you can just melt the glue back down and get it out. The rubber bands might work too. |
|
|
|
Post by World Champion Randy Orton on Feb 9, 2021 22:11:44 GMT -5
That’s a helluva an idea, I would have never thought of that. If you try it, let me know how it goes. Another idea I had was if I wrap those rubber bands used for braces or the plastic bands that come with the elites and wrap it around the peg and then stick it in the joint. So I haven’t tried it on the MJF figure, but I have done it on a bunch of NECA and McFarlane figures before and it works. The other positives are that excess is easy to trim, and if you screw up you can just melt the glue back down and get it out. The rubber bands might work too. I gotta try this but I don’t have a hot glue gun unfortunately. I tried the rubber bands idea and it just didn’t work. Starting to run out of ideas and patience haha. I’m trying to figure out if the problem is the ball joint itself or the actual joint it pops into. |
|
|
|
Post by WCWThunderRosa on Feb 11, 2021 13:55:50 GMT -5
Any suggestions for how to do Pac’s left leg wrap from All Out 2019? Preferably without painting
|
|
tommygee15
Superstar
Joined on: Jun 17, 2020 10:47:12 GMT -5
Posts: 835
|
Post by tommygee15 on Feb 15, 2021 14:10:30 GMT -5
 Repainted the rsc exclusive kenny omega |
|
|
|
Post by WCWThunderRosa on Feb 16, 2021 9:40:12 GMT -5
Do Cody or Kenny use the same thighs as Pac? I need an all black left thigh
|
|
|
|
Post by Sizzle on Feb 17, 2021 20:34:53 GMT -5
Has anyone made a Mox in trunks? I’ve been seeing it on Instagram and was wondering if anyone has a recipe
|
|
|
|
Post by WCWThunderRosa on Feb 17, 2021 21:16:39 GMT -5
Has anyone made a Mox in trunks? I’ve been seeing it on Instagram and was wondering if anyone has a recipe Might need to wait a few more series before we can start making real customs like that |
|
|
|
Post by LK3 on Feb 20, 2021 3:25:17 GMT -5
Kenny Omega - Dynamite 2/17/21 (Thru the eyes of Jim Ross)  |
|
Deleted
Joined on: Nov 29, 2024 13:34:48 GMT -5
Posts: 0
|
Post by Deleted on Mar 6, 2021 18:05:10 GMT -5
I will never accept the notion "We'll never have a figure of (X)" again having taken this picture just 10 mins ago -  Unbelievable |
|
nytevyzon
Mid-Carder
Joined on: May 10, 2010 12:13:54 GMT -5
Posts: 336
|
Post by nytevyzon on Mar 9, 2021 17:25:24 GMT -5
Anyone planning on getting some extra series 4 Omega’s to do an easy upper body swap onto the older Kenny figs?
Btw I love how easy the upper body swaps are on these figs.
|
|
|
|
Post by cordless2016 on Mar 12, 2021 11:33:37 GMT -5
Anyone know if the skin tone on series 4 Kenny matches series 2 MJF? I think MJF’s body resembles Kenny way better and was thinking of using his torso for a Kenny fixup.
|
|
|
|
Post by wrestlingdelorean on Mar 14, 2021 17:37:19 GMT -5
Anyone planning on getting some extra series 4 Omega’s to do an easy upper body swap onto the older Kenny figs? Btw I love how easy the upper body swaps are on these figs. Yep. Waiting for them to go back up. |
|
|
|
Post by WCWThunderRosa on Mar 14, 2021 19:44:09 GMT -5
Anyone know if the skin tone on series 4 Kenny matches series 2 MJF? I think MJF’s body resembles Kenny way better and was thinking of using his torso for a Kenny fixup. Omega’s first head doesn’t sit very well on MJF’s torso, he doesn’t have much of a neck |
|
|
|
Post by ilikekqueen on Mar 15, 2021 21:02:54 GMT -5
I heated my Darby’s head swap in a attempt to put it on a Mattel body but it didn’t fit and now it’s super loose. How can I fix this?
|
|
|
|
Post by cordless2016 on Mar 16, 2021 15:13:43 GMT -5
I heated my Darby’s head swap in a attempt to put it on a Mattel body but it didn’t fit and now it’s super loose. How can I fix this? You can stuff some cotton in the head until it’s to your liking. Start with alittle and add more until it isn’t loose any more. |
|
|
|
Post by ilikekqueen on Mar 16, 2021 15:23:05 GMT -5
I heated my Darby’s head swap in a attempt to put it on a Mattel body but it didn’t fit and now it’s super loose. How can I fix this? You can stuff some cotton in the head until it’s to your liking. Start with alittle and add more until it isn’t loose any more. Oh sweet! Do you know how I can get it to fit on a Mattel torso? I’m using the Drake torso in particular |
|
prestonlavaguy
Jobber
Joined on: Mar 21, 2021 16:05:26 GMT -5
Posts: 2
|
Post by prestonlavaguy on Mar 21, 2021 17:44:11 GMT -5
 A little sloppy, but here’s a skin repaint on Omega What did you use to repaint it? |
|
prestonlavaguy
Jobber
Joined on: Mar 21, 2021 16:05:26 GMT -5
Posts: 2
|
Post by prestonlavaguy on Mar 22, 2021 11:18:59 GMT -5
A little sloppy, but here’s a skin repaint on Omega What did you use to repaint it? |
|
