Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 835
|
Post by Robz PippinRoad on Nov 13, 2020 18:45:46 GMT -5
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 835
|
Post by Robz PippinRoad on Nov 13, 2020 18:49:14 GMT -5
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 835
|
Post by Robz PippinRoad on Nov 13, 2020 18:50:14 GMT -5
   Looking at these photos I don't think kenny needs to be any bigger, if anything a little shorter neck would do kenny omega figures justice.. cody a little taller.. However moxley and Dustin are the real issue.. Hence jeremy acknowledging the mistake Cody’s torso should be taller, I think that would fix him (and also make it pretty easy to fix the previous figures with the new parts) I think that is a perfect assessment of his figure ✔️ |
|
Deleted
Joined on: Apr 18, 2024 11:19:10 GMT -5
Posts: 0
|
Post by Deleted on Nov 13, 2020 19:06:09 GMT -5
Cody needs to be a bit taller/wider.
|
|
|
|
Post by BadGirlRyleigh on Nov 13, 2020 19:59:08 GMT -5
Cody needs to be a bit taller/wider. I think the width is fine, he just needs bigger arms and as already said to be taller |
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 835
|
Post by Robz PippinRoad on Nov 13, 2020 21:20:24 GMT -5
  this isn’t perfect by any means but I played around w these a little size wise just for some potential prospective to kinda mull over the bottom pics I tried to do reverse to see from both sides of the discussion land top pics I just tried to lineup size wise as close as I could but gave it two different tries hopefully there helpful when I get figs in hand I’ll try to do something more in scale if I can or at least more straight ahead camera shots |
|
JDragonM32
Mid-Carder
Joined on: Jan 17, 2008 2:47:58 GMT -5
Posts: 411 
|
Post by JDragonM32 on Nov 13, 2020 21:56:22 GMT -5
So basically from all those above photos, Cody is too short but otherwise everyone is the correct scale
|
|
|
|
Post by BadGirlRyleigh on Nov 14, 2020 0:44:34 GMT -5
So basically from all those above photos, Cody is too short but otherwise everyone is the correct scale No, they’re all incorrect. Cody is too short, Moxley is too tall, and Dustin is gigantic. |
|
JDragonM32
Mid-Carder
Joined on: Jan 17, 2008 2:47:58 GMT -5
Posts: 411
|
Post by JDragonM32 on Nov 14, 2020 4:19:35 GMT -5
Dustin looks about right when you consider his height vs Kane in those pics? Moxley is maybe a little bit too tall, but again in those pics he’s taller than Triple H so is relatively correct vs Undertaker/Kane. In saying that though, Mattel figure heights are irrelevant to these as they’re not the same scale just purely based on the thickness of arms/torsos. Cody is clearly too short based on all those pics though
|
|
Ace Gervase
Main Eventer
Joined on: Nov 11, 2002 16:09:33 GMT -5
Posts: 1,581
|
Post by Ace Gervase on Nov 15, 2020 9:52:42 GMT -5
Everyone keeps bring up that pic of Kane and Dustin in suits, but look at Kane’s boots in the ring! The man would wear 2-3 inch lefts for his gimmick
|
|
|
|
Post by BadGirlRyleigh on Nov 15, 2020 10:27:36 GMT -5
Dustin looks about right when you consider his height vs Kane in those pics? Moxley is maybe a little bit too tall, but again in those pics he’s taller than Triple H so is relatively correct vs Undertaker/Kane. In saying that though, Mattel figure heights are irrelevant to these as they’re not the same scale just purely based on the thickness of arms/torsos. Cody is clearly too short based on all those pics though Kane’s figures are made based off his height when he’s wearing boot lifts to be 7 feet tall They told us from the beginning they would be in scale with WWE |
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,488
|
Post by Thunder Chunky on Nov 15, 2020 11:31:21 GMT -5
I don't see a problem with anyone besides Cody being too short.
|
|
scotthitman1
Superstar
Joined on: May 26, 2016 20:59:07 GMT -5
Posts: 711
|
Post by scotthitman1 on Nov 15, 2020 17:04:38 GMT -5
Do mattel elite boots fit on aew figs? Is so, I'm thinking some stone cold steve austin boots on Moxley to fix the height...Would this work?
|
|
|
|
Post by TheChamp420 on Nov 15, 2020 17:40:02 GMT -5
It looks to me that the bigger problem is Cody is too short, rather than Mox & Dustin being to tall (while the are slightly too tall) Cody is the bigger issue
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,488
|
Post by Thunder Chunky on Nov 15, 2020 17:57:07 GMT -5
Dustin and Mox are big guys, I don't see a problem with them. Cody is the issue.
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 835
|
Post by Robz PippinRoad on Nov 15, 2020 18:04:27 GMT -5
Dustin looks about right when you consider his height vs Kane in those pics? Moxley is maybe a little bit too tall, but again in those pics he’s taller than Triple H so is relatively correct vs Undertaker/Kane. In saying that though, Mattel figure heights are irrelevant to these as they’re not the same scale just purely based on the thickness of arms/torsos. Cody is clearly too short based on all those pics though Kane’s figures are made based off his height when he’s wearing boot lifts to be 7 feet tall They told us from the beginning they would be in scale with WWE Where are you getting Kane is wearing lifts to be 7 ft tall ? I’m guessing you didn’t mean this literally and if that’s true then no biggie but if this was a literal statement I’m pretty baffled as Mattel is either using the online heights and or real life height I’m sure they weren’t just handed a magical kayfabe storybook of wrestling By Vince and followed it to a T Does he wears lifts and or wrestling boots that have very thick soles ... yes it easy to find in most any pic of him in the ring but neither Kane the character or Glen Jacobs are 7 ft tall lifts or not also in regard to the second statement I’m open to the idea of this as it’s possible I haven’t found it yet and I have been watching through several of his interviews w you tubers and or at the toy events and other things he’s done but I’m not finding any where that Jeremy definitely said that this line would be exact scale to Mattel Elite figures ... in scale with your other wrestling figures as in 1/12 scale isn’t Apples to Apples but again if it’s out there I would like to see it maybe I missed it |
|
marvelelite
Superstar
Joined on: Aug 1, 2019 2:11:34 GMT -5
Posts: 558
|
Post by marvelelite on Nov 15, 2020 18:53:45 GMT -5
It's not like Mattel is perfect with scale. The first Ricochet anyone?
|
|
scotthitman1
Superstar
Joined on: May 26, 2016 20:59:07 GMT -5
Posts: 711
|
Post by scotthitman1 on Nov 16, 2020 12:00:08 GMT -5
Do mattel elite boots work on aew figs? Anyone know. I'm thinking I could use elite stone cold boots to fix the height of Moxley when I get him if they do to shorten him up a bit
|
|
|
|
Post by Yambag Jones on Nov 16, 2020 14:05:45 GMT -5
It looks to me that the bigger problem is Cody is too short, rather than Mox & Dustin being to tall (while the are slightly too tall) Cody is the bigger issue Waiting on a second set before I open S2, but this is what I can put together too. |
|
|
|
Post by rastlinfigures on Nov 19, 2020 15:50:04 GMT -5
I just received my figures. While Dustin is rather tall, he doesn't look as off as Mox. Mox is not only too tall in comparison with the other figures but also looks bulkier.
|
|
