|
|
Post by kgchampion on Jun 29, 2021 1:41:59 GMT -5
RSC has put out some cool accessories in the past like the ring barricade, caskets, referee shirts, ring steps, etc. What kind of accessories would you like to see RSC produce in the future?
Personally, I’d like to see them tackle a generic scale ring. That’s probably not cost effective for them, though. I’d also love to see some backstage playsets or accessories like vending machines to go with the playsets Mattel has released before.
What do you want to see from RSC?
|
|
|
|
Post by newgenandy on Jun 29, 2021 3:37:48 GMT -5
I’d like them to do some generic figures to use as ringside crew, emt etc
Jakks did a set, not sure what they were called but it was camera crew etc. Mattel can’t make them but presume ringside could do their own elite scale generic guys and then clothes sets to go with them?
|
|
cantu1984
Superstar
Joined on: Sept 16, 2005 2:21:37 GMT -5
Posts: 816
|
Post by cantu1984 on Jun 29, 2021 11:35:09 GMT -5
I'd like to see more clothing and hardcore accessories. Maybe security shirts, or a generic WWE Logo/Ringside Logo Shirt. Flame effects for tables maybe some backstage crates?
|
|
|
|
Post by J'Dinkalage Morgoone on Jun 29, 2021 11:36:54 GMT -5
I think people would really like emt/camera workers for their feds.
I dont play or have a set up but years ago i would have loved them.
|
|
|
|
Post by rkmo: Autonomous Meat Shield on Jun 29, 2021 11:58:05 GMT -5
Yes to everything above, and a good portion for things below.
|
|
Bobby Heenan
Mid-Carder
Putting up with Ham n' eggers...
Joined on: May 8, 2015 12:46:14 GMT -5
Posts: 481
|
Post by Bobby Heenan on Jun 29, 2021 13:17:13 GMT -5
I'd like a timekeeper's table, they're usually smaller and just hold the bell and the belt being defended. I'd also love packs of blue chairs for my classic setup!
Last but not least, I'd REALLY like a classic Survivor Series ring skirt to complete the classic big 4 PPVs, and maybe generic/Superstars/Wrestling Challenge skirts.
|
|
|
|
Post by Mr. #1derful 🇵🇸 on Jun 29, 2021 13:23:16 GMT -5
I’d love some RSC branded turnbuckle pads and ringskirts for the (All) Elite scale ring. A breakaway 20ft ladder would be welcome too.  |
|
drgreenevil
Superstar
Joined on: Jun 10, 2012 18:49:14 GMT -5
Posts: 820
|
Post by drgreenevil on Jun 29, 2021 14:03:59 GMT -5
Sooooooo............
Basically everything the "company that cannot be named" sells?
|
|
|
|
Post by Fighter Hayabusa on Jun 29, 2021 14:05:43 GMT -5
Generic heads along with soft goods clothing for refs, security, camera men, etc.
|
|
|
|
Post by DZ: WF Legacy on Jun 29, 2021 14:24:12 GMT -5
I liked the aprons & ropes for the Elite/AS ring. They went for cheap, and they produced a nice variety of stuff both modern and old school, like Nitro and the maroon Royal Rumble skirt. I picked up quite a few of those, but they seemed to stick around for long, and then Mattel released the light-up Main Event rings, so I don't expect to see them again. It was the best we had it since the old Ring Gear sets from Jakks. I absolutely love the concept of those.
|
|
viper412
Main Eventer
Joined on: Feb 9, 2021 15:36:42 GMT -5
Posts: 2,329
|
Post by viper412 on Jun 29, 2021 14:44:01 GMT -5
I’d love some RSC branded turnbuckle pads and ringskirts for the (All) Elite scale ring. A breakaway 20ft ladder would be welcome too. Their ladders are already mad tall and you want double size? |
|
|
|
Post by qdogg on Jun 29, 2021 15:53:50 GMT -5
Generic Camera Man with camera
Dumpster accessory
breakable toilet and sink bathroom set
locker room set with several lockers
|
|
|
|
Post by kgchampion on Jun 29, 2021 17:06:30 GMT -5
Sooooooo............ Basically everything the "company that cannot be named" sells? Eh, I think their stuff kinda sucks. I think RSC’s designs are much nicer and the finished products seem much better manufactured. But basically, yeah. Stuff like that with RSC quality. My one gripe about RSC’s stuff is their ladders are too deep compared to the Mattel or old Jakks ladders. They’re a little too bulk for my liking, but the height is perfect. |
|
|
|
Post by shanieomaniac on Jun 30, 2021 0:03:33 GMT -5
Belt Packs. Bring back the belt packs. And, this may seem like an odd one, but I want the bitty accessories. Give me Sunglasses, Glasses, "Soda" cans, Microphones, and water bottles. All the sorts of little things that figures can wear or hold in their hands. I cannot tell you how many long, midnight oil hours I have spent scouring the internet without success for eyewear that fits my figures. The only luck I ever had was once I bought a grab bag that contained three pairs of sunglasses and two pairs of regular glasses. Both pairs of regular glasses have long since been used, (one went to a Joey Styles figure, another went to a Buffy figure), and I ended up repainting the one pair of sunglasses for a Shane custom. Really. I love the little details on things and they get lost so dang easily. Give me a way to buy more.
EDIT: If they wanted to make a "Women's Pack" as well and include things like cat ears, headbands, and necklaces, I'd be very much down for that too. Nattie lost her ears and I'd love a new set.
|
|
newworldoz
Mid-Carder
Joined on: May 20, 2017 7:03:52 GMT -5
Posts: 205 
|
Post by newworldoz on Jun 30, 2021 4:10:10 GMT -5
I wish they released just the old school security railing. The 2-in-1 set with the modern barricade to put over top was always just too cost prohibitive for me. Especially with international shipping and the fact I would never set up the modern barricade.
|
|
secondwhiteline
Main Eventer
Joined on: Nov 18, 2015 13:06:39 GMT -5
Posts: 1,543
|
Post by secondwhiteline on Jun 30, 2021 8:03:30 GMT -5
I’d like them to do some generic figures to use as ringside crew, emt etc Jakks did a set, not sure what they were called but it was camera crew etc. Mattel can’t make them but presume ringside could do their own elite scale generic guys and then clothes sets to go with them? Ringside probably wouldn't want to invest in the tooling for something like that, but I could see them doing ref and security shirts, maybe some camera crew gear. I'd be into it. |
|
|
|
Post by newgenandy on Jun 30, 2021 10:13:19 GMT -5
I’d like them to do some generic figures to use as ringside crew, emt etc Jakks did a set, not sure what they were called but it was camera crew etc. Mattel can’t make them but presume ringside could do their own elite scale generic guys and then clothes sets to go with them? Ringside probably wouldn't want to invest in the tooling for something like that, but I could see them doing ref and security shirts, maybe some camera crew gear. I'd be into it. Yeah - not sure if there’s generic molds available? They did the major pod gigs, I think generic bodies would reach more people? They’d reuse the same body and leg / arms and maybe have 1 or 2 faces? Just fantasy planning lol |
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Jun 30, 2021 10:23:13 GMT -5
I would like a more accurate tall breakable ladder. For some reason toy companies don’t include the support beams on the ladders. Maybe it’s a small detail, but it looks weird without it.
|
|
secondwhiteline
Main Eventer
Joined on: Nov 18, 2015 13:06:39 GMT -5
Posts: 1,543
|
Post by secondwhiteline on Jun 30, 2021 10:45:04 GMT -5
Ringside probably wouldn't want to invest in the tooling for something like that, but I could see them doing ref and security shirts, maybe some camera crew gear. I'd be into it. Yeah - not sure if there’s generic molds available? They did the major pod gigs, I think generic bodies would reach more people? They’d reuse the same body and leg / arms and maybe have 1 or 2 faces? Just fantasy planning lol That's true, I guess my assumption was them being smaller than the wrestlers. But you can potentially use some generic cruiserweight molds depending on what they've got available. Or how big are the suit bucks for the announcer types they've released? |
|
|
|
Post by SuperJimmy12345 on Jul 3, 2021 11:11:29 GMT -5
They should focus on making tables that actually break on impact, they’re awful
|
|
