|
|
Post by Glorydaysofwrestling on Oct 27, 2022 12:58:27 GMT -5
I wish the belts actually curved around the waist. They pop out like big squares.
|
|
|
|
Post by coldblooded on Oct 27, 2022 13:13:33 GMT -5
This is something I brought up in the q&a with Steve and was more or less given a blanket we made more new re tooled titles in elite series 100. But my question wasnt really about retooling the sizes and such. More like brand new tech such as OPs question that may have been my fault, but thought i kinda relayed that in my question and saying the titles hover around the waist etc. Hey Steve, have you guys thought about re tooling the title belts? More akin to the hardcore title? Or smaller clips so the title doesn't look like it's floating/hovering around the figure? We’ve discussed re-doing older titles and just announced new versions of the Women’s and spinner titles for Elite 100 at SDCC. It does come down to deciding on spending the tooling money on tweaking old versions or if it’s more important to get all new titles out and we’ll usually land on prioritizing all new titles. |
|
|
|
Post by master of the WORLD! on Oct 27, 2022 14:03:46 GMT -5
I think a new material for the straps would be cool but I think they need to work more on the scaling and they need to have the plates curved first. the classic IC title is prob the worst offender.. it's comically oversized
|
|
|
|
Post by Crossfit Jesus on Oct 27, 2022 15:13:22 GMT -5
I really liked how the belt that came with cash in Rollins looked. If all belts looked like that that would be cool
|
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Oct 27, 2022 15:25:26 GMT -5
I think a new material for the straps would be cool but I think they need to work more on the scaling and they need to have the plates curved first. the classic IC title is prob the worst offender.. it's comically oversized The WCW US title says hi. I wish we could get a material that's more malleable. When the figures are holding the belts they look flat. One of the belts that never looked right to me was the winged eagle. Mattel's always looked more ovalish (almost like the batman logo) whereas the belt I remember seemed to look more round. I think Jakks got the overall shape correct. Was there two versions of this belt?  |
|
|
|
Post by Fighter Hayabusa on Oct 27, 2022 15:37:31 GMT -5
With clear bands and/or some double sided tape you can pose any of their belts over the shoulder
|
|
MonsoonMan
Main Eventer
SE Wisconsin, NE Illinois figure hunter.
Joined on: Jan 1, 2012 22:47:05 GMT -5
Posts: 2,459
|
Post by MonsoonMan on Oct 27, 2022 18:31:13 GMT -5
theres already a LONG waiting list, but forbiddenfigures makes the best figure belts on the market
|
|
casualfan
Mid-Carder
Joined on: Nov 22, 2014 7:04:30 GMT -5
Posts: 166 
|
Post by casualfan on Oct 27, 2022 20:00:38 GMT -5
The one that looks pretty bad and overly big to me is the US belt.
|
|
|
|
Post by RuthlessFigs on Oct 27, 2022 22:22:50 GMT -5
To this day, i still believe Jakks' belts > Mattel's. Especially the World Heavyweight Championship.
They may look a little big on some, but i still use a few Jakks belts on my Elite's today.
If Jakks did the pop in studs like Mattel does, instead of that weird buckle thing, they'd be unmatched.
|
|
|
|
Post by kgchampion on Oct 28, 2022 1:25:16 GMT -5
I don’t think it’s possible to make it a thinner material. I’ve had a few of the little studs tear over the years as is. I suppose a more pliable material might be less likely to tear, though.
I’ve noticed that the buttons on the actual modern WWE titles are fake, though, and there’s nothing for the buttons to clasp onto. So I assume that there’s a magnet on one end of the strap and a metal plate at the other end. It would be cool if Mattel could do something similar with action figure belts so we could get some button sculpting, but I imagine that would be cost prohibitive. And are there even magnets thin enough to fit on such tiny belts?
|
|
DrakeParker
Superstar
WF 10+ Year Member
If you dislike Vince McMahon, Hulk Hogan, or THE DISCO INFERNO, You are a WHINER BABA BOOEY PRAG!
Joined on: Apr 3, 2011 9:04:57 GMT -5
Posts: 847
|
Post by DrakeParker on Oct 28, 2022 1:38:12 GMT -5
I don’t think it’s possible to make it a thinner material. I’ve had a few of the little studs tear over the years as is. I suppose a more pliable material might be less likely to tear, though. I’ve noticed that the buttons on the actual modern WWE titles are fake, though, and there’s nothing for the buttons to clasp onto. So I assume that there’s a magnet on one end of the strap and a metal plate at the other end. It would be cool if Mattel could do something similar with action figure belts so we could get some button sculpting, but I imagine that would be cost prohibitive. And are there even magnets thin enough to fit on such tiny belts? Newer belts are made with Velcro, not magnets  |
|
|
|
Post by Vamp55 on Oct 28, 2022 6:24:43 GMT -5
I’ve always found it odd, that the company that produces millions of 1:64 scale die cast cars, hasn’t figured out how to make or include die cast belts for figures… (and I don’t count those 1 of 1000 things).
Think a series with Diecast belts (Metal) would sell extremely well. Maybe a “Ultimate edition metal” series or something… I’d buy them and I’m a MOCer! Lol
|
|
|
|
Post by J-MANN on Oct 28, 2022 14:51:01 GMT -5
theres already a LONG waiting list, but forbiddenfigures makes the best figure belts on the market How long is the list? I send two emails over a month ago asking about some belts and still have not heard anything. |
|
kanepilk
Superstar
Joined on: Oct 7, 2021 19:38:25 GMT -5
Posts: 505
|
Post by kanepilk on Oct 29, 2022 11:13:37 GMT -5
The Hardcore belt was kinda unique, in that it was all one single piece of rubber. It doesn't have the 'shine' some of the belts have, which is alright for it being the hardcore belt but probably wouldn't pass on a 'normal' belt, but because it's all rubber, it kinda moulds to the waist of the figure a little bit better.
There used to be a chap on here years ago that made "re-leathered" belts - he had a thin synthetic leather-ish material and some velcro. He'd take the plates off the Jakks belts and put them on this material. I have a few of them in the attic somewhere. They were a definite improvement and would be surely cheap to mass produce.
|
|
DrakeParker
Superstar
WF 10+ Year Member
If you dislike Vince McMahon, Hulk Hogan, or THE DISCO INFERNO, You are a WHINER BABA BOOEY PRAG!
Joined on: Apr 3, 2011 9:04:57 GMT -5
Posts: 847
|
Post by DrakeParker on Oct 29, 2022 12:08:08 GMT -5
The Hardcore belt was kinda unique, in that it was all one single piece of rubber. It doesn't have the 'shine' some of the belts have, which is alright for it being the hardcore belt but probably wouldn't pass on a 'normal' belt, but because it's all rubber, it kinda moulds to the waist of the figure a little bit better. Like the Daniel Bryan Eco-WWE Title. All one piece and much more pliable than the standard belts |
|
MonsoonMan
Main Eventer
SE Wisconsin, NE Illinois figure hunter.
Joined on: Jan 1, 2012 22:47:05 GMT -5
Posts: 2,459
|
Post by MonsoonMan on Oct 29, 2022 21:47:12 GMT -5
|
|
|
|
Post by gentlemanjohnny on Oct 29, 2022 22:17:57 GMT -5
I love the one piece rubber belts. The wwe championship that I think came with Rollins, the eco belt with Daniel Bryan and the hardcore belt are the only ones that I have. Anyone know if Mattel made others?
|
|
|
|
Post by attidudanalagression on Oct 29, 2022 22:43:34 GMT -5
The Hardcore belt was kinda unique, in that it was all one single piece of rubber. It doesn't have the 'shine' some of the belts have, which is alright for it being the hardcore belt but probably wouldn't pass on a 'normal' belt, but because it's all rubber, it kinda moulds to the waist of the figure a little bit better. There used to be a chap on here years ago that made "re-leathered" belts - he had a thin synthetic leather-ish material and some velcro. He'd take the plates off the Jakks belts and put them on this material. I have a few of them in the attic somewhere. They were a definite improvement and would be surely cheap to mass produce. I had to go look at mine I never noticed why that belt looked the best in the waist. Always thought it was dull plastic |
|
|
|
Post by kgchampion on Oct 30, 2022 12:21:38 GMT -5
I don’t think it’s possible to make it a thinner material. I’ve had a few of the little studs tear over the years as is. I suppose a more pliable material might be less likely to tear, though. I’ve noticed that the buttons on the actual modern WWE titles are fake, though, and there’s nothing for the buttons to clasp onto. So I assume that there’s a magnet on one end of the strap and a metal plate at the other end. It would be cool if Mattel could do something similar with action figure belts so we could get some button sculpting, but I imagine that would be cost prohibitive. And are there even magnets thin enough to fit on such tiny belts? Newer belts are made with Velcro, not magnets That’s so disappointing. That just seems so cheap. |
|
|
|
Post by kgchampion on Oct 30, 2022 12:28:57 GMT -5
I love the one piece rubber belts. The wwe championship that I think came with Rollins, the eco belt with Daniel Bryan and the hardcore belt are the only ones that I have. Anyone know if Mattel made others? I actually agree with you. They aren’t shiny, but I just like them better. They remind me of the first Jakks BCA belts that came in the Championship 4-pack with Owen, Bulldog, Rocky Maivia, and Undertaker. Which happens to be the very first thing I ordered from RSC back in 1998. So they’re incredibly nostalgic to me. I wish Mattel would make versions for all their belts. Maybe pack them into basics. |
|
