|
|
Post by class316 on Apr 20, 2005 22:29:36 GMT -5
Ok, this is a theater edition Luke Skywalker that I got from ebay a few years ago.  As you can see, all of a sudden the bubble is off the card  I have no idea how that happened. But I want to glue it back so it's not noticeable (nothing is torn so it IS possible). Any recommendations what glue I should use and how to do it? Help! |
|
Deleted
Joined on: Sept 21, 2024 9:32:31 GMT -5
Posts: 0
|
Post by Deleted on Apr 20, 2005 22:55:07 GMT -5
I remember reading back in the day that these used cheaper packaging. Go to rebelscum.com's forums and check out the customizing threads. A lot of knowledgeable people repack figures on custom cards.
|
|
|
|
Post by class316 on Apr 20, 2005 22:57:32 GMT -5
Well I don't want to use a custom card. I want to glue this one since the card and bubble are intact. But I'll try that site thanks.
|
|
Deleted
Joined on: Sept 21, 2024 9:32:31 GMT -5
Posts: 0
|
Post by Deleted on Apr 21, 2005 0:21:45 GMT -5
Well I don't want to use a custom card. I want to glue this one since the card and bubble are intact. But I'll try that site thanks. Yeah, I just meant that they would be able to suggest what type of glue to use. I didn't think you wanted a different card. |
|
|
|
Post by spender on Apr 21, 2005 7:21:49 GMT -5
I have it loose. It worth anything loose?
|
|
|
|
Post by class316 on Apr 21, 2005 8:32:27 GMT -5
I have it loose. It worth anything loose? I don't think it's worth anything loose as it's the exact same figure as the POTF2 Luke that was mass produced. But the one I have is the one that was given during the release of ROTJ SE in 1997. |
|
|
|
Post by ecwrvd420 on Apr 21, 2005 22:22:11 GMT -5
I have that figure MOC. How much do u think i can get for that?
|
|
|
|
Post by class316 on Apr 22, 2005 9:00:55 GMT -5
Last I heard it goes from $40-$80.
|
|
|
|
Post by class316 on Apr 22, 2005 20:00:27 GMT -5
The only thing that came out of rebelscum.com is not to use superglue, but no one knows what exactly I should use  |
|
|
|
Post by J Sylar on Apr 24, 2005 9:04:27 GMT -5
The only thing that came out of rebelscum.com is not to use superglue, but no one knows what exactly I should use Use a glue gun. That glue wont eat the packaging as much as, say, a more corrsive glue might. |
|
|
|
Post by class316 on Apr 24, 2005 12:11:47 GMT -5
|
|
Deleted
Joined on: Sept 21, 2024 9:32:31 GMT -5
Posts: 0
|
Post by Deleted on Apr 25, 2005 4:17:17 GMT -5
|
|
Mr. Bigglesworth
Main Eventer
Joined on: Apr 13, 2002 15:42:21 GMT -5
Posts: 2,088
|
Post by Mr. Bigglesworth on Apr 25, 2005 14:41:20 GMT -5
I sold the 2 I had back when I got them for like $100 a piece.
|
|
|
|
Post by class316 on May 5, 2005 23:19:12 GMT -5
Of all the advice I was given, I thought the one on www.ffurg.com/packaging/attaching_bubbles.htm was the least risky. So I got that glue and I used small free sample lotion bottles that I found instead of paint bottles (I grabbed 8 of these for this). That's how my SE Luke Jedi looks now:   |
|
Deleted
Joined on: Sept 21, 2024 9:32:31 GMT -5
Posts: 0
|
Post by Deleted on May 6, 2005 4:13:14 GMT -5
Looks pretty good. Put it inside of a Star Case and you will never be able to tell. I am glad you found your answers at that site.
|
|
