۩ ™kaneisdaman™ ۩ 's Printouts Thread

Well I have done several printout now and this is my latest instalment. It may be my last for a short while but that is in question.
The following that are real scale (will say in its description) are properly scaled when printed in photoshop. Other programs can be used though to print these out.
The thumbs for the interview areas are digitally put together models. The thumbs for the table and stage are the templates you use but via the link given.
Any questions do ask. I haven’t had time to make small models yet but shall soon.

----------------------------------


Interview Area- Smackdown!

This one is all 2D because nobody is going to in reality printout a 3D version. THIS IS ALREADY REAL SCALE.

Thumb:


Link to actual area:
img101.imageshack.us/img101/1419/sdwq3.gif


----------------------------------


Interview Area- Raw

This one is a 3D printout. No tabs are drawn in so you can make up your own to you’re your needs. THIS IS ALREADY REAL SCALE.

Thumb:


Link to actual area:
img155.imageshack.us/img155/2858/rawiaff9.gif


----------------------------------


Announcers Table

This is 3D and comes with monitors and logos for all brands to have on the cover instead of the WWE logo. G means glue and you glue those tabs to the sides of the table. To put the monitors in the desk, cut a slit anywhere you desire on the table top and the little bit of paper you have cut just fold it down then fold it half way up to create a little holder for the monitors. No tabs have been given besides the cluing ones so if you need anymore, insert them where ever you like. THIS IS NOT REAL SCALE COMPLETELY. IT IS LARGE AND SHOULD BE DOWNSIZED TO WHICH SIZE YOU SPECIFICALLY WANT.

Thumb:


Link to actual table:
img352.imageshack.us/img352/1821/announcerstableoz0.gif

----------------------------------


Royal Rumble 2008 Stage

This printout is 3D. All it involves is folding and cutting. The doors should be cut down the line to open. The purple square should sit behind the doors a short distance back. I have added a numbers screen if you wish to use it and one showing how the numbers should look if you wish to do them. THIS PRINTOUT IS NOT REAL SCALE PLEASE RESIZE TO YOUR SIZE WHETHER IT FITS KHALI (UNLIKE THE REAL ONE) OR DOESN’T, YOU CHOOSE.

Thumb:


Link to actual stage:
img186.imageshack.us/img186/5585/rumble08se4.gif

-----------------------------------


Thanks for looking. Remember to credit me if you use them. Also, if you view, please do give feedback.

Thanks,

kaneisdaman

No need to PM me anymore or post requests, here are the printouts for the Smackdown HD Stage.

There are a few parts and I suggest you size them accordingly.

NOTE: When using these, full credit is to be given to me as the creator of them. Please do not reproduce them claiming ownership like someone did last time I posted a printout.







Stage Base: img329.imageshack.us/img329/7227/12595828se8.gif

Small (side) Trons: img237.imageshack.us/img237/1909/34573634gq0.gif

Large Tron: img237.imageshack.us/img237/7628/18116524ow7.gif

Side gons: img329.imageshack.us/img329/3914/94304169jx4.gif

Cylinder: img237.imageshack.us/img237/3772/73882545yn2.gif

Overhead tron: img237.imageshack.us/img237/9616/56819552mz5.gif

WWE Standee: img329.imageshack.us/img329/7585/30696482gf6.gif


I know so many people have been waiting for this so enjoy. Remember to credit me though.


kaneisdaman

Well approximately last month I did my first ever printout of MVP Entrance set-up. I have decided to continue making printouts and this time I present to you the 2007 ECW stage printout. I put a fair bit of work into this so if you view, please just leave a reply.

NOTE: All should print out to the correct size when printed via Photoshop (if you don’t have it use another program maybe even word and paint to resize it accordingly).

Now the sizing of this gets huge so I have done some variations. This will fit an RA khali and that is why it’s so large. Also, I advise using cardboard for this but it isn’t essential. Cardboard helps though.

----------------------------------------

Thumbnails


Here are thumbnail views just to show you the options. These aren’t the properly sized ones. These are the thumbnails showing the two sections for the printout and the options I have given you for the second part.

Part A:



Part B:
Option 1: Full screen and curtain


Option 2: Reduced size screen and reduced size curtain


Option 3: No screen with reduced size curtain (is actually a reduced size curtain but not exemplified accurately here because it is scaled up compared to thumbnail above)


----------------------------------------

Links


These are the properly sized printout. I have given links to prevent making this thread a killer as far as downloading goes. Use these ones to printout. As mentioned they are sized correctly in Photoshop but if you don’t have it use another program maybe even word and paint to resize it accordingly.


Part A:
img255.imageshack.us/img255/6118/partaproperzl8.gif


Part B:
Option 1: Full screen and curtain (Approx 50cmx100cm)
aycu20.webshots.com/image/36379/2000393578718363781_rs.jpg

Option 2: Reduced size screen and reduced size curtain (Approx 40cmx60cm)
img442.imageshack.us/img442/1310/partb2propergk0.gif


Option 3: No screen with reduced size curtain (Approx 22x60cm)
img444.imageshack.us/img444/7909/partb3properwt0.gif


----------------------------------------

Assembly


Now assembling this stage isn’t too hard. Here are the directions:
• Print out Part A
• Cut out all the pieces
• Fold all metal parts except for the ones directly connected to the walls. They will act as a stand to hold up the walls.
• Next fold A and C down so that the metal bit is facing down.
• Glue A to B and C to D (metal part glued to the back of the top part.
• Finally, print any part B out and get it standing or leaning/attached to a wall or something like that.
• You should be done


If any further help is needed, post here or PM me.


----------------------------------------

Pictures of Completed Stage


Now what would this be if I didn’t make this stage myself. So I did in a small model version. So below are two pics of my small version of the stage using Part B’s option 1.

There will be more and bigger pics of the stage posted in the custom accessories board if you are keen to see larger pics.





Thanks for looking and I hope they are of use,
kaneisdaman

Well yet another printout from me here. I’ve done past ones like the ECW stage but this time it is the 2007 Raw Stage. Hopefully I will make a Smackdown one in the near future. Anyway it wasn’t easy to do but I present to you the Raw 2007 Stage in 3D form and if you view, a reply is appreciated.

NOTE: Due to problems with lagging and so on, the proper size ones here are approximately 1/3 of the real scale size when printed via photoshop. So increase the size by 2 more times to get the proper size. It shouldn’t be pixelated if so let me know and I will try my best to fix up any problems. (PS: I may not reply within the next week and a half). If you use some other method to print it out, resize it to scale with figs but currently it is approximately 1/3 of a real scale size.

----------------------------------------

Thumbnails


Here are thumbnail views just to show you the parts. These aren’t the properly sized ones. These are the thumbnails showing the two sections of the printout.

Part 1:


Part 2:




----------------------------------------

Links


These are the properly sized printout. I have given links to prevent making this thread a killer as far as downloading goes. Use these ones to printout. As mentioned they are sized correctly in Photoshop but if you don’t have it use another program maybe even word and paint to resize it accordingly.


Part 1:
aycu02.webshots.com/image/37641/2004692351858586518_rs.jpg

Part 2:
aycu28.webshots.com/image/38667/2002625133439841733_rs.jpg


----------------------------------------

Assembly

Now assembling this stage isn’t too hard. It is pretty obvious by looking at it. I haven’t put any set tabs in so feel free to do so yourself where you find it necessary. Please not that cardboard is highly recommended for construction of this stage mainly for the walking stage part and ramp. If using paper for the large tron area be sure to use some support to hold it up.

If any further help is needed, post here or PM me.


----------------------------------------

Pictures of Completed Stage

Graphical Representation:



Now what would this be if I didn’t make this stage myself. So I did in a small model version. So below are some pics of my small version of the stage.

There will be more and bigger pics of the stage posted in the custom accessories board if you are keen to see larger pics.




Thanks for looking and I hope they are of use,
kaneisdaman

NOTE: I’ll post these and here they will also be archived in the stickied thread. They are here for commenting though.

Here are the ECW HD Printouts!

There are a few parts and I suggest you size them accordingly.

NOTE: When using any part of these, full credit is to be given to me as the creator of them. Also, do not reproduce them claiming ownership like someone did last time I posted a printout.







Stage Base: img242.imageshack.us/img242/4897/63389107dn2.gif

Small (side) Trons: img242.imageshack.us/img242/3447/59390051vm9.gif

Large Tron: img242.imageshack.us/img242/3097/88723749tb7.gif

Side ecw panel: img76.imageshack.us/img76/6109/10151417nj3.gif

Cylinder: img246.imageshack.us/img246/3898/73479952cr4.gif

Overhead tron: img242.imageshack.us/img242/9377/48398457ak6.gif

WWE Standee: img246.imageshack.us/img246/7535/11ff1.gif


ECW Microphone:














------------------------------------------




Enjoy and remember to credit.


kaneisdaman


-------------------------------------------------

Anyway here it is with a reference pic.




Remember to credit where used.