|
Post by Chicago on Jul 2, 2020 13:19:12 GMT -5
If anyone still needs it, Battle Packs Series 64 Lita & Trish Stratus is available on Walmart's site for $15.88. I ordered this and they sent me the AJ/Daniel 2-pack. Pretty lame. I ordered this and they sent me the AJ/Daniel 2-pack. Pretty lame. Same! I've initiated a replacement. Really hoping this doesn't happen again. I got my replacement order today and they sent me Owens/Ali lol. I give up.
|
|
|
Post by Chicago on Jul 1, 2020 15:36:01 GMT -5
BoneCrunchingCustomsLove the head swaps. I think some of them, like Shane, look even better on BCA bodies. I could be wrong, but I seem to remember Viscera wearing pants at first. Maybe not with that top, but something similar to it. BCA Acolytes will always be a big "What if?" to me. Just based on the parts alone, yours are as good as can be expected of Jakks. Head sculpts would not have been Real Scan quality yet, and I'm not even sure Jakks would've thought to use Kama legs again after Christian, so once again yours would easily best Jakks circa '99. Signature 5 Road Dogg probably shouldn't get any praise, like at all lol, but I appreciate what Jakks was going for. What I really like about your custom is the added layer of wrist/fist tape. A Backlash/Signature 5 combo might be my new favorite BCA Road Dogg. Excellent work on Jarrett. That figure blows away the half-assed one Jakks gave us with all Owen parts. Repainting the head took it to the next level, and your skill at that is comparable to your parts selection. Can't wait to see you attempt some of his more colorful ring attire. Green and blue are a must!
|
|
|
Post by Chicago on Jun 29, 2020 14:29:59 GMT -5
Locking this per the OP's request. Love this idea, by the way. It's what the hobby should be about, so thanks to powerfred3k for his generosity.
|
|
|
Post by Chicago on Jun 26, 2020 23:45:41 GMT -5
If anyone still needs it, Battle Packs Series 64 Lita & Trish Stratus is available on Walmart's site for $15.88. I ordered this and they sent me the AJ/Daniel 2-pack. Pretty lame. Same! I've initiated a replacement. Really hoping this doesn't happen again.
|
|
|
Post by Chicago on Jun 25, 2020 19:44:08 GMT -5
SKU: 741504997
UPC: 887961946888
Page isn't even up yet, but here's the Brickseek numbers for this set.
|
|
|
Post by Chicago on Jun 25, 2020 18:52:03 GMT -5
|
|
|
Post by Chicago on Jun 23, 2020 19:31:07 GMT -5
Against my better judgment, I pre-ordered Kane and Randy Orton. Probably would've made it Mark Henry or Undertaker instead of Orton if either of those was still available. Don't get me wrong, I love RNN Orton, but really I just added it to my cart for the free shipping. Kane is the only one among them that I'm legitimately excited for.
|
|
|
Post by Chicago on Jun 23, 2020 14:21:59 GMT -5
If anyone still needs it, Battle Packs Series 64 Lita & Trish Stratus is available on Walmart's site for $15.88.
|
|
|
Post by Chicago on Jun 22, 2020 17:06:29 GMT -5
Can we get the pics in the OP or at least what page in the thread has the pics? Added pics to the OP.
|
|
|
Post by Chicago on Jun 22, 2020 12:16:50 GMT -5
Got one in the first two minutes. Much better for me than last year: Took me until 12:48 before I was able to complete my order (of one). Thought I got lucky there for a second when I got through at 11:57, but I knew it was too good to be true. Still not sure if it's worth $40 shipped to me, but I know it will look great on display. Never would've thought we'd get Slim Jim branding on a wrestling figure, so I think for that reason alone I had to at least give it a shot. Glad I got through. Price for Mr. T was identical after tax and Super Saver shipping, which thankfully came up as the default option under my account. My total was $39.74.
|
|
|
Post by Chicago on Jun 22, 2020 12:12:06 GMT -5
There's gotta be a breakable throne at some point, right?
Watch there be a King Corbin in the Wrekkin' line before he gets a Basic, Battle Pack or Elite.
|
|
|
Post by Chicago on Jun 22, 2020 11:51:16 GMT -5
Epic Moments is back but only for this:
|
|
|
Post by Chicago on Jun 16, 2020 15:29:42 GMT -5
They're Action Figures out of Delaware is a reliable source for this kind of information. Obviously, one would expect there to be changes made, considering Gronkowski is now out of the picture.
|
|
|
Post by Chicago on Jun 13, 2020 6:38:50 GMT -5
Amazon has the Wrekkin' Slambulance in stock (on June 18) for $39.99.
|
|
|
Post by Chicago on Jun 13, 2020 6:18:45 GMT -5
BoneCrunchingCustoms I like that Severn. I know 2 Tuff 5 Austin legs aren't for everyone, but those larger knee pads were just about made for him. Taka is a detailed figure that often gets overlooked. I can honestly say I don't think I've seen anyone use that torso for a BCA custom. The dislike of Slammers parts must run deep lol. Also, I can't begin to tell you and The Shiniest Wizard how much I love the custom series graphics on the last page. Brilliant stuff, guys.
|
|
|
Post by Chicago on Jun 8, 2020 21:50:17 GMT -5
I saw a loose Superstars series 6 Edge on ebay that appears to be a variant and uses Billy Gunn legs. It's not perfect but I much prefer it to the molded HHH legs. I may try to pick one up. I've seen three versions of Superstars Series 7 Edge: 1. Series 6 HHH body (same as the prototype) 2. Series 6 HHH torso, 2 Tuff 2 NAO arms and 2 Tuff 2 Billy Gunn legs 3. Series 6 HHH torso, 2 Tuff 2 NAO arms and Series 6 HHH legs No idea if there exists a fourth version with HHH arms and Billy Gunn legs, but I suppose that it's possible. Number 1 is the standard Series 7 Edge. Number 3 might be the second most common variation. Number 2 seems like it comes up the least in my searches. Number 3 is the only version I've come across for the BJ's Wholesale Club Exclusive 3-Pack. That could mean it was among the final production run since the 3-Packs hit a couple of months after the solo release, but I have no way of knowing that for sure.
|
|
|
Post by Chicago on Jun 8, 2020 10:51:29 GMT -5
Added all the pics to the OP. Just click the spoiler tag and they should be visible.
|
|
|
Post by Chicago on Jun 6, 2020 17:21:54 GMT -5
|
|
|
Post by Chicago on Jun 5, 2020 5:55:20 GMT -5
BoneCrunchingCustomsGreat job on the Pillman. I like that if I'm ever unsure of something I see on Twitter, I can always come here to get confirmation from you. Regarding the DOA arms, I think choosing those parts and repainting them was probably the best way to go about making a BCA Pillman. The changes that you've made to Pillman and Kane's hair, as well as the subtle little touch-ups to Bret and Kane's facial features, bring so much out of their sculpts. Finalized version of Edge evokes the greatness that is Backlash Series 3 Edge with that torso and those arms. If only they all could've been like that. Justin "Hawk" Bradshaw is incredible. Love that you found an alternative use for the LOD torso. What a bummer it is that Jakks never sculpted proper cowboy boots for this line. Is that the Backlash Series 1 HHH head? That's a peculiar one. I wonder what a Ripped & Ruthless Series 2 HHH head would look like on that body. Anyone ever swapped a BCA head for a R&R 2 head? Jakks never attempted it outside of the Special Edition Series 3 HHH figure, but I'd have to imagine someone in the late '90s made a custom Kane, Sable or Shawn Michaels with one of those heads. zappa2510Did you paint over Owen legs for Benoit? Reminds me of the TTL Rebellion Series 1 figure, just with the open hand swapped to the left side. Real Scan head looks good on that HHH torso.
|
|
|
Post by Chicago on May 29, 2020 7:54:33 GMT -5
|
|