|
|
Post by biggdaddyg on Feb 15, 2008 21:40:15 GMT -5
well tonight i started my arena i wanted to go 4 ft by 8ft but ended up going 3ft x 6ft so its not going to be as large as i wanted but still you can see where its heading only two pics for now just showing the table with the rsr and the metal guard rails and to let you see the size of it im going to go back and work on it more tonight but let me know what you think of the size and of the rails next to the ring and keep watching for updates   oh and if this needs to be moved mods move it i wasnt sure where to post it thanks heres 3 more pics i see now im going to have to add the other two 33x33 tables i have to make it all fit so thats going to slow me down a bit and someone asked to see cams so i put some out there i still have two more of the hand held incomeing    heres some pics of my accessories and yes i have the walls for the prop box sets and i also have the one hall of pain set and i have a trainging day set on its way so now you can see the size this thing will end up being oh i didnt take pics of all the chairs and trash cans either but i have alot of them to lol           |
|
|
|
Post by wwe4ever on Feb 15, 2008 21:52:41 GMT -5
The guard rails look good. You still have a lot of work to do. It will look good when all the guard rails are set up. You should make an audience too and possibly a custom stage.
|
|
|
|
Post by biggdaddyg on Feb 15, 2008 22:05:07 GMT -5
it will
there will be a print out on foam board behind the rails
then on the open side of the ring there with be rails to i just have to cut those yet my dremel needed a break lol
then im useing the old titan tron but it will be put up on a stage with a foam board backed and a hole cut for the entrance way with black felt hanging in front of it
behind that will be a stage with steps and a gorilla position
a gym
a food court
locker room
g.m office
and what ever else im able to fit back there lol this is just the first step it will be awhile before it is done
im even thinking of putting the g.m. office on a second floor just depends on how well everything else goes
im going to hang some steel gurders over the ring and add working spotlights to that
so keep your eyes open for updates
|
|
CM Punk
Main Eventer
Bite My Shinny Metal Ass
Joined on: Aug 22, 2007 15:30:12 GMT -5
Posts: 2,553
|
Post by CM Punk on Feb 15, 2008 22:45:13 GMT -5
Damn Dude That Gonna Be one Good Lookin Arena. Its Gonna Look Great man. Cant Wait To see it finished!
|
|
|
|
Post by ericbischoff on Feb 16, 2008 4:59:52 GMT -5
That's good to start, but lots of work need to be done, but I sure that would end up awesome arena. Looking forward for it.
|
|
dimshady
Main Eventer
Can never get his Avater to work!
Joined on: Dec 3, 2006 9:33:28 GMT -5
Posts: 1,749
|
Post by dimshady on Feb 16, 2008 5:16:20 GMT -5
love that gard rail sir, cant wait to see it finished.
|
|
|
|
Post by ● kaneisdaman ● on Feb 16, 2008 6:30:02 GMT -5
There sure is work to be done but its a nice start. Decent spacing left and the rails are good. Did you make them? They look awesome.
|
|
|
|
Post by biggdaddyg on Feb 16, 2008 6:36:19 GMT -5
There sure is work to be done but its a nice start. Decent spacing left and the rails are good. Did you make them? They look awesome. no i ordered the rails from another site if you want there name pm me and i will give it to you not sure about posting sites on here dont want to make anyone mad also tomm. im going to do some moch ups of the other things im going to be doing just to get an idea of space for what i want the size of things i need to make i will post those pics as i do it and see what you goes think let me know what you think or if you think i should change something along the way its always good to get someone elses point of view on things as your doing them but i just want to say one thing now its not supposed to look like any one arena more of a pic fed type thing would what to call it i guess thanks guys |
|
raz2005uk
Main Eventer
Over 15 UK refs & 14 INT. refs now too! 1st WFUK member to get Rock Family 3 Pack :)
Joined on: Nov 20, 2005 7:57:02 GMT -5
Posts: 3,500
|
Post by raz2005uk on Feb 16, 2008 9:08:52 GMT -5
looking good so far - one thing you can do to add to the realism, try get some camera stands with 2 camera guys - 1 near the ring and 1 near the entrance
|
|
|
|
Post by f1gh7er on Feb 16, 2008 9:58:43 GMT -5
simple so far but i love the baracade doent look like theres gonna be a cround though u kinda need one but there not that imporent but anyway good job so far
|
|
|
|
Post by greenjack1992 on Feb 16, 2008 10:09:38 GMT -5
That guard railing is fab, what have you used?
|
|
|
|
Post by hellogoodbye on Feb 16, 2008 11:52:21 GMT -5
off to a good start can't wait to see the finished product
|
|
|
|
Post by ● kaneisdaman ● on Feb 16, 2008 12:26:14 GMT -5
There sure is work to be done but its a nice start. Decent spacing left and the rails are good. Did you make them? They look awesome. no i ordered the rails from another site if you want there name pm me and i will give it to you not sure about posting sites on here dont want to make anyone mad also tomm. im going to do some moch ups of the other things im going to be doing just to get an idea of space for what i want the size of things i need to make i will post those pics as i do it and see what you goes think let me know what you think or if you think i should change something along the way its always good to get someone elses point of view on things as your doing them but i just want to say one thing now its not supposed to look like any one arena more of a pic fed type thing would what to call it i guess thanks guys Ok then, I was just wondering. Thanks for answering. Do post more tomorrow, I think this has great potential. |
|
Tim Sorenson
Main Eventer
Joined on: Mar 2, 2005 17:10:18 GMT -5
Posts: 4,521
|
Post by Tim Sorenson on Feb 16, 2008 14:16:44 GMT -5
It looks good so far, I would make a custom entrance though.
|
|
|
|
Post by biggdaddyg on Feb 16, 2008 15:07:42 GMT -5
it will be a custom entrance of sorts once its all done
im going to build up a stage that the tron will sit on with a cutain to go into the back
|
|
|
|
Post by naparo01 on Feb 16, 2008 15:34:47 GMT -5
2 questions
How did you bend the guard rails
And how did you get them to stand up so perfectly?
|
|
Rooty
Main Eventer
If you love my sig as much as I do, + Karma please.
Joined on: Aug 22, 2007 21:49:47 GMT -5
Posts: 1,544
|
Post by Rooty on Feb 16, 2008 15:39:36 GMT -5
Do what i did with that old ttl stage. Pry off the top part with people on in
|
|
|
|
Post by biggdaddyg on Feb 16, 2008 16:14:33 GMT -5
2 questions How did you bend the guard rails And how did you get them to stand up so perfectly? i used a dremel lol i cut the tad off the bottom so the would lay flat i then used tape to hold them down and to bend them i just used my hands lol no i used the dremel again and just knotched it out a small bit then i used my hands to bend it made it alot easier hope that helps i will add some pic so what i did after while for you so you can see what i mean a little better thanks |
|
|
|
Post by biggdaddyg on Feb 16, 2008 16:17:57 GMT -5
i was thinking the same thing root lol
|
|
|
|
Post by kingashley on Feb 16, 2008 16:28:07 GMT -5
Looking real good mate,peice of quick advice-turn the ring around so the steps are closer to the stage rather than further!
Other than that looking stunning!
|
|
