mrthomkinson
Mid-Carder
Joined on: Apr 24, 2009 4:24:10 GMT -5
Posts: 132
|
Post by mrthomkinson on May 31, 2012 6:56:14 GMT -5
Hi all,
I have been trying to come up with a case to fit all single figures and mail aways,
Like i did do for the hasbro mocs, slight problem i had was alot of figures are diferent hights and widths.
I have tryed to make it so if you want to display a figure in a pose it be done.
It should be a must for mail aways,
Selling cost am guesing around £1.85 each
please give me you feed back guys,
have a look at images attached
|
|
mrthomkinson
Mid-Carder
Joined on: Apr 24, 2009 4:24:10 GMT -5
Posts: 132
|
Post by mrthomkinson on May 31, 2012 6:56:50 GMT -5
Hi all, I have been trying to come up with a case to fit all single figures and mail aways, Like i did do for the hasbro mocs, slight problem i had was alot of figures are diferent hights and widths. I have tryed to make it so if you want to display a figure in a pose it be done. It should be a must for mail aways, Selling cost am guesing around £1.85 each please give me you feed back guys, have a look at images attached |
|
ICHIBAN 一番
Main Eventer
✮SINCE 1977✮
Joined on: Feb 16, 2008 10:49:27 GMT -5
Posts: 4,001
|
Post by ICHIBAN 一番 on May 31, 2012 7:05:54 GMT -5
I'd definately buy some for mailaways, testshots and protos.
The only issue is they rattle around inside the plastic if stored or moved.
What I would do is keep the figures in a ziplock bag and then put it inside one of these cases with the bags edges in between the part you close, then it keeps the figure in place.
|
|
Hasbroandy
Main Eventer
R.I.P."Doink the Clown"R.I.P.
Joined on: Jun 30, 2010 15:19:48 GMT -5
Posts: 1,770
|
Post by Hasbroandy on May 31, 2012 7:53:13 GMT -5
I agree I would buy some too  Cool idea! |
|
mrthomkinson
Mid-Carder
Joined on: Apr 24, 2009 4:24:10 GMT -5
Posts: 132
|
Post by mrthomkinson on May 31, 2012 7:58:45 GMT -5
I'd definately buy some for mailaways, testshots and protos. The only issue is they rattle around inside the plastic if stored or moved. What I would do is keep the figures in a ziplock bag and then put it inside one of these cases with the bags edges in between the part you close, then it keeps the figure in place. Thats the one issue as some figures are fatter than others so it has to be made at the widest point. On a positive if you move the arms to fill the space it stops the rattle, appreciate your imput. |
|
