ddubs
Mid-Carder
Joined on: Nov 8, 2014 5:45:30 GMT -5
Posts: 225
|
Post by ddubs on Feb 8, 2016 7:45:44 GMT -5
I'm trying to get pieces for a Balor fix up into an elite. Are Cody Rhodes E20 and E32 the same body mould?
Thanks in advance
|
|
Balor Club
Superstar
Joined on: Jul 7, 2009 11:00:52 GMT -5
Posts: 631
|
Post by Balor Club on Feb 8, 2016 7:59:10 GMT -5
Yeah both elite 20 and 32 use the same mold.
|
|
Deleted
Joined on: May 12, 2024 9:07:15 GMT -5
Posts: 0
|
Post by Deleted on Feb 8, 2016 9:04:03 GMT -5
|
|
|
Post by poindizzle on Feb 8, 2016 9:13:09 GMT -5
I'm a little disappointed that we will likely never get that Balor look as an official Elite.
|
|
|
Post by jsmells on Feb 8, 2016 10:09:23 GMT -5
It's a weird body to get. He's more ripped than the skinny, but doesn't have as much mass as those Cody's. Either you give him a little too much or too little. It's like that skinny frame they make needs a version with more defined abs and pecs to nail it.
|
|
|
Post by The Champ is Here! on Feb 8, 2016 10:28:12 GMT -5
I went with the skinny body, so that it will match the elite
|
|
|
Post by jsmells on Feb 8, 2016 10:35:18 GMT -5
I went with the skinny body, so that it will match the elite Yeah me too. Plus I wanted more of a Bullet Club/Devitt look and he had slightly less mass then too. I was watching matches just thinking "He's not that big, but he's way more defined." Plus it was easier for me to just swap parts with E32 Bryan.
|
|
|
Post by FBtagteamsrule on Feb 8, 2016 15:13:27 GMT -5
I went with the skinny body, so that it will match the elite Yeah me too. Plus I wanted more of a Bullet Club/Devitt look and he had slightly less mass then too. I was watching matches just thinking "He's not that big, but he's way more defined." Plus it was easier for me to just swap parts with E32 Bryan. did u have to do the knee swap or just a boot swap? and r the d-bry trunks molded in black or did u have to paint them?
|
|
|
Post by POOR-ly Cuyler on Feb 8, 2016 15:21:07 GMT -5
Yeah me too. Plus I wanted more of a Bullet Club/Devitt look and he had slightly less mass then too. I was watching matches just thinking "He's not that big, but he's way more defined." Plus it was easier for me to just swap parts with E32 Bryan. did u have to do the knee swap or just a boot swap? and r the d-bry trunks molded in black or did u have to paint them? Its still a knee swap, basic and elite boots dont have the same pegs. Elites have longer pegs on the kickers
|
|
|
Post by jsmells on Feb 8, 2016 15:33:16 GMT -5
Yeah me too. Plus I wanted more of a Bullet Club/Devitt look and he had slightly less mass then too. I was watching matches just thinking "He's not that big, but he's way more defined." Plus it was easier for me to just swap parts with E32 Bryan. did u have to do the knee swap or just a boot swap? and r the d-bry trunks molded in black or did u have to paint them? Black molded trunks. Just boot swap, knees are good as is.
|
|
volunteerarmy
Mid-Carder
Joined on: Oct 19, 2015 18:25:10 GMT -5
Posts: 177
|
Post by volunteerarmy on Feb 8, 2016 15:40:57 GMT -5
I used Jericho calf and trimmed a tiny ridge into balors boot at top to slide flush. If you have a gap on leg it most likely that ring that sits flush on bottom of some elite calves. Good luck, and check out the customs board as it helped me get mine completed
|
|
|
Post by FBtagteamsrule on Feb 8, 2016 17:02:21 GMT -5
did u have to do the knee swap or just a boot swap? and r the d-bry trunks molded in black or did u have to paint them? Black molded trunks. Just boot swap, knees are good as is. thanx. mite have to use my e32 bryan as i only bought him for the jumpsuit to make a better erik rowan using a kane body. other option would be the e29 cm punk i just found at bam. lotta paint removal on that tho.
|
|
|
Post by jsmells on Feb 8, 2016 17:44:25 GMT -5
You can use punks boots, they're solid black on e29 and fit perfect
|
|