ryan93
Mid-Carder
Joined on: Nov 10, 2012 23:53:23 GMT -5
Posts: 355
|
Post by ryan93 on Nov 25, 2016 16:49:26 GMT -5
Has anybody had trouble with there JBL figure. I took it out of the pack and it's like he has a bobble head. It just keeps falling down. It feels very loose like it could just fall off. Any way to fix this?
|
|
Deleted
Joined on: May 7, 2024 8:18:56 GMT -5
Posts: 0
|
Post by Deleted on Nov 25, 2016 16:51:09 GMT -5
You could take the head off, then take some cotton and stuff it in the neck hole, then put the head back on. It may make the head sit too high but that would be my first idea for a fix
|
|
|
Post by The American Daydream on Nov 25, 2016 17:14:50 GMT -5
Not sure if this works with neck pegs but it does work with loose torsos and legs.
1) Boil some water 2) soak the head in the water for a few minutes 3) Remove the head from the neck peg 4) apply a small bit of super glue onto the neck peg 5) pop the head back on 6) continuously rotate the head until the glue dries
This should allow the super glue to fill a little bit more space inside the hole in the head essentially making the neck peg a little thicker and all in all making the head a snug fit. Don't forget to rotate the head or it will be glued in that position and you don't want that lol
|
|
ryan93
Mid-Carder
Joined on: Nov 10, 2012 23:53:23 GMT -5
Posts: 355
|
Post by ryan93 on Nov 25, 2016 17:59:36 GMT -5
Thanks to both of you. I used both ideas and I did my first head removal. I put the super glue in and move it around. And it didn't quite fix the problem. It's more like it's too big for the peg so the weight keeps moving it around. So I took toothpick and cut up a cotton ball. I just moved pieces of it around inside the head and it filled the space around it. It worked and now it has it's regular mobility because the cotton ball doesn't stop it from moving just holds it in place. It's not even noticeable.
|
|
|
Post by PJ on Nov 25, 2016 18:05:59 GMT -5
Next time for a loose head instead of putting the cotton in the head when you remove the head stuff some cotton into the neck where the stem comes out and then put the head back on. This way you firm up the looseness but don't raise the height of the head. That is what I do for a loose head. I only put the cotton in the head to raise it.
|
|
ryan93
Mid-Carder
Joined on: Nov 10, 2012 23:53:23 GMT -5
Posts: 355
|
Post by ryan93 on Nov 25, 2016 18:20:49 GMT -5
Next time for a loose head instead of putting the cotton in the head when you remove the head stuff some cotton into the neck where the stem comes out and then put the head back on. This way you firm up the looseness but don't raise the height of the head. That is what I do for a loose head. I only put the cotton in the head to raise it. That's what I did. I just stuffed some cotton around the neck. It really does work. I could have done that but it was good for me to learn how to take a head off a figure.
|
|
|
Post by rastlinfigures on Nov 25, 2016 20:27:55 GMT -5
Has anybody had trouble with there JBL figure. I took it out of the pack and it's like he has a bobble head. It just keeps falling down. It feels very loose like it could just fall off. Any way to fix this? Anyone notice how overly tall he is?
|
|
|
Post by BoneCrunchingCustoms on Nov 26, 2016 4:07:23 GMT -5
I use the clear elastics that comes with figures sometimes and I wrap it around the neck peg. I find it works quite effectively. I will take pics tomorrow if anyone needs them.
|
|
|
Post by aggressiveperfectpoor on Nov 26, 2016 4:49:55 GMT -5
I'm on the fence about getting him. Does he have the elite suited legs or are they the basic suited legs?
|
|
|
Post by The American Daydream on Nov 26, 2016 10:41:54 GMT -5
I use the clear elastics that comes with figures sometimes and I wrap it around the neck peg. I find it works quite effectively. I will take pics tomorrow if anyone needs them. I would like to see this, never thought of this method before.
|
|
|
Post by rastlinfigures on Nov 26, 2016 11:11:23 GMT -5
I'm on the fence about getting him. Does he have the elite suited legs or are they the basic suited legs? Basic. Which means you can't bend them to make him shorter and closer to his actual scale height.
|
|
|
Post by Fighter Hayabusa on Nov 26, 2016 11:18:19 GMT -5
Guessing scale would be way off to headswap and use for Attitude Era Commissioner Regal.
|
|
|
Post by Joe/Smurf on Nov 26, 2016 11:36:34 GMT -5
I'm on the fence about getting him. Does he have the elite suited legs or are they the basic suited legs? Basic. Which means you can't bend them to make him shorter and closer to his actual scale height. JBL is billed at like 6'6" isn't he? How tall is this figure that you're this worried about the height?
|
|
|
Post by rustyjohnson on Nov 26, 2016 11:54:03 GMT -5
Basic. Which means you can't bend them to make him shorter and closer to his actual scale height. JBL is billed at like 6'6" isn't he? How tall is this figure that you're this worried about the height? While we're in the subject anyone shorten irs's legs?
|
|
|
Post by rastlinfigures on Nov 26, 2016 12:04:14 GMT -5
Basic. Which means you can't bend them to make him shorter and closer to his actual scale height. JBL is billed at like 6'6" isn't he? How tall is this figure that you're this worried about the height? He's noticeably taller than an Elite Luke Harper and almost the same height as the basic Kane.
|
|
|
Post by Joe/Smurf on Nov 26, 2016 12:53:24 GMT -5
JBL is billed at like 6'6" isn't he? How tall is this figure that you're this worried about the height? He's noticeably taller than an Elite Luke Harper and almost the same height as the basic Kane. Jeez... well at least he's gonna be sitting down usually if you're just using him as a commentator
|
|
|
Post by BoneCrunchingCustoms on Nov 26, 2016 13:33:40 GMT -5
I use the clear elastics that comes with figures sometimes and I wrap it around the neck peg. I find it works quite effectively. I will take pics tomorrow if anyone needs them. I would like to see this, never thought of this method before. Hopefully you can see what I did. I took closer pics but my camera blows and they were too blurry. I just take the small clear elastics and wrap them around the peg as many times as possible. I did this with JBL, Andre and a couple of others.
|
|
Medieval
Main Eventer
@mattelwwe_medieval
Joined on: Jan 22, 2015 12:46:43 GMT -5
Posts: 4,638
|
Post by Medieval on Nov 26, 2016 14:38:41 GMT -5
JBL is billed at like 6'6" isn't he? How tall is this figure that you're this worried about the height? While we're in the subject anyone shorten irs's legs? I am pretty sure PJ did that to I.R.S. I don't remember what legs he used? Maybe Ricardo? I can't remember. I think it is in the fix up thread somewhere.
|
|
venusflytyr
Mid-Carder
Joined on: Feb 25, 2016 21:46:37 GMT -5
Posts: 322
|
Post by venusflytyr on Nov 26, 2016 17:44:53 GMT -5
fyi, he has an ab crunch joint, which maybe all the suited male figures have, I just noticed Paul Heyman had it too.
|
|