fmwpt
Superstar
Joined on: Apr 26, 2014 0:50:48 GMT -5
Posts: 751
|
Bicep swap
Apr 13, 2017 14:16:39 GMT -5
via mobile
Post by fmwpt on Apr 13, 2017 14:16:39 GMT -5
Hi! So, today I tought let's do it a bicep swap on elite Dolph Ziggler to the basic ones. The arms came out easy. I separated the bicep from the rest of the arm easy too but now I cant put the bicep in the another arm. What I have to do? If somebody have a video I apprecitte.
|
|
|
Bicep swap
Apr 13, 2017 14:18:11 GMT -5
via mobile
Post by FBtagteamsrule on Apr 13, 2017 14:18:11 GMT -5
Heat up the arm with hot water or hairdryer.
|
|
fmwpt
Superstar
Joined on: Apr 26, 2014 0:50:48 GMT -5
Posts: 751
|
Bicep swap
Apr 13, 2017 14:27:59 GMT -5
via mobile
Post by fmwpt on Apr 13, 2017 14:27:59 GMT -5
I already did that to swap the arms and now I can't put the bicep.
|
|
|
Post by Fighter Hayabusa on Apr 13, 2017 14:32:09 GMT -5
Heat the arm up again. When the biceps cooled the plastic hardened back up. Heat up the arm with hot water or hair dryer and should snap right on.
|
|
|
Post by bababooey on Apr 13, 2017 15:13:04 GMT -5
Sometimes the disk in the elbow is different sizes. Try fitting the pieces together without the pin and look to see if you have clearance for the pin to go through. If not, you can sand the disk down until it fits.
|
|
fmwpt
Superstar
Joined on: Apr 26, 2014 0:50:48 GMT -5
Posts: 751
|
Bicep swap
Apr 13, 2017 18:27:34 GMT -5
via mobile
Post by fmwpt on Apr 13, 2017 18:27:34 GMT -5
Finally I did it. Thanks to everyone that answer!
|
|