|
Post by AlexWestCollects on Mar 8, 2018 22:42:17 GMT -5
Not sure if this is a running issue or not but I purchased 2 Dx Hbks during Black Friday and one had a noticeable gap within the left shoulder area. I figured it was a factory error and sold it on eBay. I was taking the gear off my other Hbk today to take some photos and noticed it had the same problem. The figure was literally taken out of the box and put on my shelf so I never thought to check. There’s a gap and it’s hard to rotate the arm like it’s stuck in place. Is this a known issue or is it my bad luck? I’d like to order another as he’s on sale but if it’s just going to have the same issue than I guess that would defeat the purpose.
|
|
|
Post by ~*Young $ Money*~ on Mar 8, 2018 22:46:28 GMT -5
Looks like it’s cracked a bit. I haven’t gotten one yet but interested to see if it’s a common issue now
|
|
|
Post by AlexWestCollects on Mar 8, 2018 22:48:54 GMT -5
Looks like it’s cracked a bit. I haven’t gotten one yet but interested to see if it’s a common issue now It goes all the way up to the neck.
|
|
|
Post by chowmeinkane on Mar 8, 2018 22:51:12 GMT -5
Have you tried the Hot water/Hair dryer methods? This seems to be a common issue nowadays, not complaining too much since it's an easy fix. The gap part does suck though.
|
|
|
Post by AlexWestCollects on Mar 8, 2018 22:57:44 GMT -5
Have you tried the Hot water/Hair dryer methods? This seems to be a common issue nowadays, not complaining too much since it's an easy fix. The gap part does suck though. Not sure if it’s stuck or has something to do with the actual gap? I had something similar with my one of my Rollins elites and it kinda snapped the torso open a bit and then it was able to move.
|
|
|
Post by PJ on Mar 9, 2018 5:43:19 GMT -5
Either you had bad luck or I had good luck, because mine is fine.
|
|
|
Post by AlexWestCollects on Mar 9, 2018 6:09:03 GMT -5
Either you had bad luck or I had good luck, because mine is fine. Cool. I guess I might try my luck and grab another.
|
|
|
Post by hellojoeivers on Mar 9, 2018 7:11:02 GMT -5
My Tyler Bate had this problem, pretty frustrating. It's got a noticeable gap on the shoulder and the arm's gone super floppy
|
|
|
Post by Xæro #FakeCollector on Mar 9, 2018 10:52:05 GMT -5
My Tyler Bate had this problem, pretty frustrating. It's got a noticeable gap on the shoulder and the arm's gone super floppy I see this a lot with this torso. I rotate the arm and it feels like the plastic peg inside the torso gets stuck and twisted, resulting in a loose arm. It happens pretty much everytime I buy a figure with this mold.
|
|