|
|
Post by ● kaneisdaman ● on Sept 8, 2008 23:27:00 GMT -5
Id like to have a go at making a BNB Kane from around his debut years in that red suit.
What would be the best BNB to paint to make that Kane?
Preferably i dont want to make part switches.
Also, what would be the best way to do the head?
|
|
|
|
Post by wwf4lyf on Sept 9, 2008 6:26:22 GMT -5
Get some air dry clay and mould the mask thinly. As for paint, use a small particle acrylic, but DONT use Games Workshop. It's horrible and expensive.
|
|
|
|
Post by aceofspadez12 on Sept 9, 2008 18:46:02 GMT -5
i would go with undertaker and mould the mask
|
|
|
|
Post by ● kaneisdaman ● on Sept 9, 2008 22:26:29 GMT -5
Thanks to both. i would go with undertaker and mould the mask But taker has straps molded on and two gloves. Id prefer to use someone from series 2 or 3. |
|
Bozwell634™
Main Eventer
Joined on: Apr 27, 2007 0:11:21 GMT -5
Posts: 4,652
|
Post by Bozwell634™ on Sept 10, 2008 5:20:32 GMT -5
Well i was thinking HHH if you mold on a mask and paint the hair black.
From series 2 or 3, you could also use a Kane but you would have to mold mask and hair, possibly cm punk but really they will more than likely take alot of holding and painting.
|
|
★Mr. Korn★
Main Eventer
Joined on: Sept 2, 2006 23:17:48 GMT -5
Posts: 1,735
|
Post by ★Mr. Korn★ on Sept 10, 2008 5:53:04 GMT -5
I'd Say Kane with a Taker or Punk head. With a moulded mask.
|
|
|
|
Post by devillocks on Sept 10, 2008 11:12:13 GMT -5
If you're going to mold a mask, I say use BNB Kane's head and go ahead and mold the hair. Can't get closer than the real thing for a head match. And since we know you only have 3000 Kane figures to look at for reference, you should be off to a good start  Biggest problem might be the lack of detail for the upper body outfit, but should be a passable challenge. |
|
|
|
Post by ● kaneisdaman ● on Sept 10, 2008 22:48:26 GMT -5
Thanks all, i had HHH in mind but i dont know how accessible his BNB will be to me. If you're going to mold a mask, I say use BNB Kane's head and go ahead and mold the hair. Can't get closer than the real thing for a head match. And since we know you only have 3000 Kane figures to look at for reference, you should be off to a good start Biggest problem might be the lack of detail for the upper body outfit, but should be a passable challenge. You would be surprised how devistatingly not close that is.  But i know his attires well enough and i wouldnt leave it up to jakks for accuracy.  |
|
|
|
Post by cmpunk775 on Sept 11, 2008 3:26:20 GMT -5
you should try to just like mold a mask and hair and you could maybe make it so it will come off and buy a kane and use his head if you want to do easy unmasking
|
|
METAL!
Superstar
Joined on: Feb 18, 2008 3:51:21 GMT -5
Posts: 691
|
Post by METAL! on Oct 13, 2008 14:42:28 GMT -5
Taker, Kane or Edge
|
|
