@brit_figs
Main Eventer
WF 10 Year Member
Joined on: Sept 25, 2009 13:02:15 GMT -5
Posts: 3,774
|
Post by @brit_figs on Jun 24, 2019 10:52:06 GMT -5
what heads have really wavey hair?
looking to do a Jungle Boy custom.
|
|
garbagemon
Mid-Carder
Joined on: Jan 5, 2016 2:04:18 GMT -5
Posts: 362
|
Post by garbagemon on Jun 24, 2019 17:58:57 GMT -5
what heads have really wavey hair? looking to do a Jungle Boy custom. Jimmy Snuka looks like one who had that super wavy hair. Some of the heads on Edge from Jakks seem to have been pretty wavy, too. |
|
@brit_figs
Main Eventer
WF 10 Year Member
Joined on: Sept 25, 2009 13:02:15 GMT -5
Posts: 3,774
|
Post by @brit_figs on Jun 25, 2019 4:28:35 GMT -5
what heads have really wavey hair? looking to do a Jungle Boy custom. Jimmy Snuka looks like one who had that super wavy hair. Some of the heads on Edge from Jakks seem to have been pretty wavy, too. Cheers pal, I've just thought of the CS Kevin Nash too. |
|
|
|
Post by Nick Maniwa on Jul 2, 2019 4:19:40 GMT -5
Jimmy Snuka looks like one who had that super wavy hair. Some of the heads on Edge from Jakks seem to have been pretty wavy, too. Cheers pal, I've just thought of the CS Kevin Nash too. Johnny Nitro has the wavy at the bottom of the hair piece. I used a Snuka Mattel hair piece for a Kenny Omega. X-Pac night work. One of the later HBK jakks sculpts has wavy hair. Screaming Edge has wavy hair. |
|
|
|
Post by Nick Maniwa on Jul 2, 2019 7:49:54 GMT -5
|
|
Steve Holt
Superstar
Looking UE Camo Snapback
Joined on: Nov 30, 2004 2:31:02 GMT -5
Posts: 778
|
Post by Steve Holt on Jul 2, 2019 8:21:21 GMT -5
What heads are everyone using for the Young Bucks?
|
|
HiQ
Mid-Carder
Joined on: Jan 5, 2013 14:47:56 GMT -5
Posts: 198
|
Post by HiQ on Jul 6, 2019 7:49:40 GMT -5
Anyone done any Micro Aggression customs?
|
|
kay44
Jobber
Joined on: Apr 5, 2019 21:39:46 GMT -5
Posts: 22
|
Post by kay44 on Oct 24, 2019 7:26:43 GMT -5
Do you think i would be able to use the boots from Hollywood Hogan Jakks Classic Super Stars on the Storm Collectables Red and White Hollywood Hogan?
|
|
|
|
Post by wrestlingarcade on Nov 12, 2019 6:50:21 GMT -5
Hi WrestlingFigs  I've just started customizing/ sculpting and wanted to share my progress and get involved on the forum. Here's a Galoob Black Scorpion I'm currently working on. I think I'm applying the paint too thick, I also should have sanded the Milliput a little before painting   |
|
|
|
Post by shanieomaniac on Nov 13, 2019 3:24:37 GMT -5
Hi WrestlingFigs I've just started customizing/ sculpting and wanted to share my progress and get involved on the forum. Here's a Galoob Black Scorpion I'm currently working on. I think I'm applying the paint too thick, I also should have sanded the Milliput a little before painting Yeah, I feel you. It appears, as I just figured out tonight, that if you thin the paint before you apply it, it works so much better. I'm sure there is a "Customizing 101" thread around here somewhere I should have read before starting these, but to be fair, I am learning something new every day, and that makes it fun. AND, although I am new myself, let me welcome you to the board. I like what you've done so far! Keep it up! |
|
|
|
Post by wrestlingarcade on Nov 13, 2019 4:47:14 GMT -5
Yeah, the paint is just too thick. I'm learning as I go 👍🏻 Thanks for the welcome
|
|
|
|
Post by shanieomaniac on Nov 15, 2019 11:29:57 GMT -5
Ok, so that one custom of mine isn't going as well as I had hoped. There is a huge problem... She's WAY too tall. I thought I could justify it by the massive pumps she is wearing, but even with those, she is a good 6 inches too tall (in comparison to Shane).
So question is. How do you change out the legs on a figure? I'm thinking of starting the figure from scratch using my spare Nikki Bella body, as she is closer to the right height, but I need to swap out the lower legs for something that doesn't have the ribbed socks. Any suggestions? Note that I am a huge newbie at this and have never swapped anything beyond a head. Again, I can paint skintones to match, I just need some help in making her tiny. (Think Alexa Bliss size.)
|
|
czw4life
Main Eventer
Refs: 24
Joined on: Jan 3, 2014 19:13:51 GMT -5
Posts: 1,846
|
Post by czw4life on Nov 15, 2019 11:57:02 GMT -5
Ok, so that one custom of mine isn't going as well as I had hoped. There is a huge problem... She's WAY too tall. I thought I could justify it by the massive pumps she is wearing, but even with those, she is a good 6 inches too tall (in comparison to Shane). So question is. How do you change out the legs on a figure? I'm thinking of starting the figure from scratch using my spare Nikki Bella body, as she is closer to the right height, but I need to swap out the lower legs for something that doesn't have the ribbed socks. Any suggestions? Note that I am a huge newbie at this and have never swapped anything beyond a head. Again, I can paint skintones to match, I just need some help in making her tiny. (Think Alexa Bliss size.) Best way to swap parts imo is to get a pan of water boiling on the stove, once its at boiling temp you can turn down the heat a little just to maintain the temp. Dip in the parts for 30 seconds or however long is needed. I have a bathroom towel near by and sometimes gloves if the water is extremely hot. Once you've soaked the part you want off in the water, pop it off from the figure. To put back on repeat the process but only heat the female part of the joint. Shoes/feet have peg joints. Separating at the knee there is a peg that you can push out with a screwdriver once heated. Just push on it til it pops out. Heat up parts except the peg to reinstall. Hip peg has ball joints on the newer figs, older figs had a ratchet style leg/hip peg that was extremely annoying and harder to get off. Lower stomach joint needs to be cracked either by the torso or the thigh part and requires lots of practice and super glue to put back together. Elbows same process as knees, wrists and arms same as shoes. Hope this helps |
|
|
|
Post by shanieomaniac on Nov 20, 2019 0:33:38 GMT -5
So TIL that part swapping (beyond heads) is above my skill level. I did everything you guys said. I boiled the water. I put figures in. I popped parts out...
No Problem.
But getting the NEW feet on the OLD figure is impoosible. I have tried everything. I can't do it. I'm trying to put a Natalya Series 61 basic feet on a basic series Stephanie body. I cannot do it. I can get one peg in each foot and then it gets stuck. I have no idea what to do. I actually boiled down an entire pot of water trying to figure it out.
Basically, help.
|
|
|
|
Post by shanieomaniac on Nov 21, 2019 15:41:34 GMT -5
So I managed to figure out the feet... after I mangled the one peg hole. But I made it work, and now I'm onto the jacket. And frankly, my fingers and hands are killing me from this, it took two hours to do, and the grey part is all splotchy because I mixed the paint rather than buy heather gray paint, and I kept running out and having to remix... But all that said, her goes..  And the jacket isn't even the hardest part... That is sculpting the face, which I am probably going to fail miserably at, but oh well. |
|
|
|
Post by Lego Customs! on Apr 17, 2020 18:59:42 GMT -5
Got some new GI Joe wrestlers on the way. Should be done hopefully over the weekend or this coming week.
|
|
@brit_figs
Main Eventer
WF 10 Year Member
Joined on: Sept 25, 2009 13:02:15 GMT -5
Posts: 3,774
|
Post by @brit_figs on Apr 18, 2020 4:49:16 GMT -5
Got some new GI Joe wrestlers on the way. Should be done hopefully over the weekend or this coming week. Yes! Can't wait to see these. |
|
ste2814
Jobber
Joined on: Apr 17, 2020 3:09:08 GMT -5
Posts: 16
|
Post by ste2814 on Apr 18, 2020 17:22:19 GMT -5
|
|
Dyamez
Main Eventer
Joined on: Aug 24, 2006 14:30:15 GMT -5
Posts: 1,394
|
Post by Dyamez on Jun 4, 2020 5:55:42 GMT -5
Old man HBK WIP <blockquote class="imgur-embed-pub" lang="en" data-id="a/FijJwPx"><a href="//imgur.com/a/FijJwPx"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script> |
|
Dyamez
Main Eventer
Joined on: Aug 24, 2006 14:30:15 GMT -5
Posts: 1,394
|
Post by Dyamez on Jun 4, 2020 6:25:21 GMT -5
|
|
