Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 2, 2014 0:22:52 GMT -5
Also, what's a good size Mick Foley head for Mattels? I was kinda intrigued by the idea of making a Basic Mick Foley and now I wanna make a WM22 one. Any TTL Foley head would work, but you'll have to carve it out. |
|
Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 2, 2014 7:12:53 GMT -5
 Sabu is nearly complete, just need to add a wrist band and paint scars Sandman is literally a Jakks head slapped onto a Barrett body with DM rock pants and a stone cold shirt. I will most likely order a Sandman shirt. |
|
|
|
Post by theaxehennig on Mar 2, 2014 8:00:25 GMT -5
 Couple of protos and my messy ass work station, Bam Bam, Raven w/ jacket and Rhino for my Elite ECW set. They'll be up finished in a few days. Loving the setup and proto shots. Many people do not know the power of spraying a flat white "dustcoat." It's what I've done for years, and really eliminates the need for many coats. In my heyday, I considered making all of the ECW 1996-7 roster in Elite form, but the furthest I got was The Eliminators, Gangstas, Douglas, Taz, RVD & Sabu. I'd love to see: The Dudleys Dreamer Whipwreck bWo Sandman Pitbulls 1 & 2 Sabu RVD Candido Louie Spicolli FBI Terry Funk Balls Eliminators |
|
|
|
Post by Squid: The Anti-Hero on Mar 2, 2014 11:21:02 GMT -5
How do I take the hands off somebody?
|
|
sicko16
Superstar
Come on you Irons!
Joined on: Mar 15, 2013 12:09:59 GMT -5
Posts: 882
|
Post by sicko16 on Mar 2, 2014 11:21:54 GMT -5
Just swapped a lita head onto a trish body. Whats a good attire i could make using that?
|
|
|
|
Post by Affliction: Elite Trader on Mar 2, 2014 11:42:12 GMT -5
How do I take the hands off somebody? Just boil and pop them out or use a hair dryer to heat it up. Just don't pull too hard and break the thin hand peg in the forearm. |
|
|
|
Post by East Coast on Mar 2, 2014 12:44:40 GMT -5
How do I take the hands off somebody? Just boil and pop them out or use a hair dryer to heat it up. Just don't pull too hard and break the thin hand peg in the forearm. I've done several hand swaps no problem. But when i tried to remove Hurricanes hands......both of them broke.  Is there any possible way to remove the broken pegs from inside the wrists? |
|
|
|
Post by Ben - #6 Munchie on Mar 2, 2014 13:01:00 GMT -5
Just boil and pop them out or use a hair dryer to heat it up. Just don't pull too hard and break the thin hand peg in the forearm. I've done several hand swaps no problem. But when i tried to remove Hurricanes hands......both of them broke. Is there any possible way to remove the broken pegs from inside the wrists? Heat the wrists up and get a needle. Put it inside and try to pierce the broken bit, then tilt the needle to an angle and pry it out. |
|
koreygunz
Main Eventer
Elite Trader
287 Refs in WFClassifieds and counting
Joined on: Jun 18, 2006 15:31:49 GMT -5
Posts: 4,708
|
Post by koreygunz on Mar 2, 2014 15:10:08 GMT -5
Couple of protos and my messy ass work station, Bam Bam, Raven w/ jacket and Rhino for my Elite ECW set. They'll be up finished in a few days. I think I see the razor Ramon you're supposed to be working on for me in the background. Can't wait to get it and see the final product... |
|
|
|
Post by marino13 on Mar 2, 2014 18:57:00 GMT -5
Just boil and pop them out or use a hair dryer to heat it up. Just don't pull too hard and break the thin hand peg in the forearm. I've done several hand swaps no problem. But when i tried to remove Hurricanes hands......both of them broke. Is there any possible way to remove the broken pegs from inside the wrists? Nuke that mother f'ing water, soak it till she's super soft. Find something thin & sturdy to stick in and pry the peg out. I've done it a few times now. It's a pain and takes awhile, but it works. |
|
Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 2, 2014 21:04:53 GMT -5
I've done several hand swaps no problem. But when i tried to remove Hurricanes hands......both of them broke. Is there any possible way to remove the broken pegs from inside the wrists? Nuke that mother f'ing water, soak it till she's super soft. Find something thin & sturdy to stick in and pry the peg out. I've done it a few times now. It's a pain and takes awhile, but it works. I usually use a very small flat head screw driver. I also usually blow dry it to heat it unless I'm doing a torso crack then I throw a pot on the stove and heat some water it stays warm longer than microwave water. |
|
cmskunk
Mid-Carder
Joined on: Oct 27, 2013 15:54:13 GMT -5
Posts: 88 
|
Post by cmskunk on Mar 2, 2014 23:19:25 GMT -5
cool sabu
|
|
|
|
The Rig
Superstar
Joined on: Jul 14, 2012 8:46:29 GMT -5
Posts: 508
|
Post by The Rig on Mar 3, 2014 0:17:01 GMT -5
^Awesome Ambrose^  *More pics in my customs thread* |
|
Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 3, 2014 0:36:25 GMT -5
@kse, it's people like you that make me upset that I can't sculpt. That looks great.
Side note: If you don't actually look like a bearded Stan Smith, I will be highly disappointed.
|
|
Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 3, 2014 1:06:37 GMT -5
Dean is awesome. I like that you went the extra mile and sculpted different hair.
Jeff looks pretty good but I like the full face paint look more
|
|
Ryan Black
Mid-Carder
Joined on: Jul 20, 2013 11:06:33 GMT -5
Posts: 143
|
Post by Ryan Black on Mar 3, 2014 11:19:50 GMT -5
That is exactly what I was thinking of doing to that Ambrose head... you just made it look so very much more realistic, @kse- awesome job as usual!
I am hoping to finally, finally get some of my stuff up and posted this week. Can't wait to have the time.
And great work as always from all you guys. Always inspiring to re-visit this thread!
|
|
DIESEL
Main Eventer
(╯°□°）╯︵ ┻━┻
Joined on: Jul 11, 2013 12:01:08 GMT -5
Posts: 2,374
|
Post by DIESEL on Mar 3, 2014 11:22:25 GMT -5
The Rig That Jeff is awesome! Who's the guy behind him?
|
|
The Rig
Superstar
Joined on: Jul 14, 2012 8:46:29 GMT -5
Posts: 508
|
Post by The Rig on Mar 3, 2014 12:35:49 GMT -5
The Rig That Jeff is awesome! Who's the guy behind him? Thats a WIP of Tyler Breeze, Thank You. |
|
Deleted
Joined on: Nov 18, 2024 8:30:50 GMT -5
Posts: 0
|
Post by Deleted on Mar 3, 2014 13:33:53 GMT -5
Couple of protos and my messy ass work station, Bam Bam, Raven w/ jacket and Rhino for my Elite ECW set. They'll be up finished in a few days. |
|
