|
|
Post by Joe/Smurf on Dec 30, 2014 23:17:38 GMT -5
Anyone put Trent Barretta boots on Ziggler to recreate his look from RAW last week? I actually put Usos boots on my Elite Ziggler for it. Didn't think the full kickpads were exactly right. Plus they'd mess up the height. |
|
tagg
Mid-Carder
Joined on: Sept 1, 2013 10:36:49 GMT -5
Posts: 114 
|
Post by tagg on Dec 31, 2014 0:40:13 GMT -5
My fix up for an elite Summerslam 2013 CM PUNK.  it's the elite 29 cm punk body with the elite 6 kickers. I decided to use this combo because I didn't want to paint anything and they have close to the same colors. |
|
billybadass91
Jobber
Joined on: Nov 29, 2014 23:46:52 GMT -5
Posts: 33
|
Post by billybadass91 on Dec 31, 2014 2:11:33 GMT -5
How do I get a peg out of a head? Pliers did bit work Heat the head then take a flathead screedriver and push it in real deep. Then try very hard to 'pry' it out. Be careful though, i've always cut my fingers in the process. I use a tea spoon and have found it to be more effective and no cuts or scratches. |
|
|
|
Post by Roman Bellic on Dec 31, 2014 2:28:00 GMT -5
i got some goo gone a couple days ago, what steps do i have to do to take off paint or etc.?
|
|
tagg
Mid-Carder
Joined on: Sept 1, 2013 10:36:49 GMT -5
Posts: 114
|
Post by tagg on Dec 31, 2014 2:36:05 GMT -5
Heat the head then take a flathead screedriver and push it in real deep. Then try very hard to 'pry' it out. Be careful though, i've always cut my fingers in the process. I use a tea spoon and have found it to be more effective and no cuts or scratches. I just heat it up and take pliers and grab on and pull,always works for me and if it doesn't just head it up more. |
|
randyrock
Main Eventer
Joined on: Nov 13, 2010 20:51:57 GMT -5
Posts: 1,265
|
Post by randyrock on Dec 31, 2014 7:40:05 GMT -5
Could anybody give me a good formula/recipe for a awesome and kinda buff elite Kurt angle? First time trying to customize a whole figure and not just swapping arms or legs. I used Kevin Von Erick body with Sandow's boots. The head came from a bald Jakks Angle figure that had a blank stare (I do not know the series) and I used a singlet off of an Angle figure that was in a Jakks two pack with Rikishi and added some Lex Luger knee pads. |
|
billybadass91
Jobber
Joined on: Nov 29, 2014 23:46:52 GMT -5
Posts: 33
|
Post by billybadass91 on Dec 31, 2014 9:12:54 GMT -5
Could anybody give me a good formula/recipe for a awesome and kinda buff elite Kurt angle? First time trying to customize a whole figure and not just swapping arms or legs. I used Kevin Von Erick body with Sandow's boots. The head came from a bald Jakks Angle figure that had a blank stare (I do not know the series) and I used a singlet off of an Angle figure that was in a Jakks two pack with Rikishi and added some Lex Luger knee pads. Holy hell dude that sounds awesome. Does the skin tone match? Can you please post a pic? Thank you by the way. |
|
Deleted
Joined on: Nov 16, 2024 19:18:55 GMT -5
Posts: 0
|
Post by Deleted on Dec 31, 2014 11:36:38 GMT -5
Who's shins did people use to make their hacksaw the right height?
I've been noticing mine looks far too short and I'd like to make him taller.
I only want to make him 1/8 " taller so I need some shins that are just slightly bigger than the small shins he has now
|
|
Deleted
Joined on: Nov 16, 2024 19:18:55 GMT -5
Posts: 0
|
Post by Deleted on Dec 31, 2014 11:55:30 GMT -5
Is it possible to put basic calves/lower legs onto an elite?
|
|
|
|
Post by Pedigree on Dec 31, 2014 12:10:22 GMT -5
Does anyone have a clearer/larger picture of the DX logo from HBK's IYH 97 (DX) match against Shamrock? This is the best I've got but I would love something a little clearer!  |
|
tagg
Mid-Carder
Joined on: Sept 1, 2013 10:36:49 GMT -5
Posts: 114
|
Post by tagg on Dec 31, 2014 12:38:00 GMT -5
Who's shins did people use to make their hacksaw the right height? I've been noticing mine looks far too short and I'd like to make him taller. I only want to make him 1/8 " taller so I need some shins that are just slightly bigger than the small shins he has now I believe that people had used Mr.Perfect shins if I'm not mistaken. |
|
Deleted
Joined on: Nov 16, 2024 19:18:55 GMT -5
Posts: 0
|
Post by Deleted on Dec 31, 2014 12:48:37 GMT -5
Does anyone have a clearer/larger picture of the DX logo from HBK's IYH 97 (DX) match against Shamrock? This is the best I've got but I would love something a little clearer! Credit goes to CMD.  |
|
|
|
Post by l on Dec 31, 2014 12:57:11 GMT -5
Is it possible to put basic calves/lower legs onto an elite? You can but you have to remove the whole lower leg from the elite and then you lose the double jointed knee. Just heat the figure, I use a pen to push the little peg out of the TOP knee joints of the elite. Then do the same with the basic (only one peg choice there) and you should be good to go. |
|
Deleted
Joined on: Nov 16, 2024 19:18:55 GMT -5
Posts: 0
|
Post by Deleted on Dec 31, 2014 13:02:18 GMT -5
Is it possible to put basic calves/lower legs onto an elite? You can but you have to remove the whole lower leg from the elite and then you lose the double jointed knee. Just heat the figure, I use a pen to push the little peg out of the TOP knee joints of the elite. Then do the same with the basic (only one peg choice there) and you should be good to go. Word. Thanks man |
|
|
|
Post by Pedigree on Dec 31, 2014 16:17:46 GMT -5
Well I've had some time off over the holidays so I spent a lot of it hunched over my desk working on these guys.   And these 2 are still in their early phases. Long way to go on both of them  |
|
ellisd
Main Eventer
Joined on: May 26, 2009 0:30:49 GMT -5
Posts: 4,758
|
Post by ellisd on Dec 31, 2014 16:24:18 GMT -5
Pedigree: those look great. Looking forward to seeing the finished Balor and Warrior. What series is the Hogan head from?
|
|
|
|
Post by Boy Wonder on Dec 31, 2014 16:48:03 GMT -5
Does anyone have a clearer/larger picture of the DX logo from HBK's IYH 97 (DX) match against Shamrock? This is the best I've got but I would love something a little clearer! Credit goes to CMD. Dear Mattel, THIS |
|
tagg
Mid-Carder
Joined on: Sept 1, 2013 10:36:49 GMT -5
Posts: 114
|
Post by tagg on Jan 1, 2015 2:29:15 GMT -5
Do the rock and Roman reigns figures have the same skintone?
|
|
Deleted
Joined on: Nov 16, 2024 19:18:55 GMT -5
Posts: 0
|
Post by Deleted on Jan 1, 2015 2:31:55 GMT -5
Do the rock and Roman reigns figures have the same skintone? yep. |
|
TeamratedCDS
Superstar
Joined on: May 12, 2014 20:11:12 GMT -5
Posts: 858
|
Post by TeamratedCDS on Jan 1, 2015 5:51:26 GMT -5
Basic 44 Kane has elite legs. Now what I'm wondering is will an elite torso fit on them since they are elite? Or did they make a complete new crotch piece mold to fit the basic torso?
|
|
