Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 0:47:53 GMT -5
For Kurt Angle, just use a Jack Swagger and remove the logos and swap the entire knee down out with a shorter boot mold. I think Cenas lower knee part may fit. I'm not sure it's been a while since I took the time to look over part choices.
|
|
Bullgod
Main Eventer
Joined on: Feb 8, 2006 14:22:13 GMT -5
Posts: 1,014
|
Post by Bullgod on Jan 7, 2015 5:05:23 GMT -5
Sting Survivor Series Thanks to Kezb23 for the shirt.  |
|
billybadass91
Jobber
Joined on: Nov 29, 2014 23:46:52 GMT -5
Posts: 33 
|
Post by billybadass91 on Jan 7, 2015 7:28:07 GMT -5
Well I'm not trying to make a more recent angle i just wanted one that would match his physique from his days in MEM. I was gonna use the Santino body but i just thought the body was too small for angle and i was also looking into using swagger but his skin tone is too pale. I can't think of any good angle head scan that would match swagger's skin tone.
|
|
billybadass91
Jobber
Joined on: Nov 29, 2014 23:46:52 GMT -5
Posts: 33
|
Post by billybadass91 on Jan 7, 2015 8:04:06 GMT -5
I don't wanna be annoying our anything but it's kind of an emergency. Could somebody please tell me how to take off tattoos from a elite 30 Batista? I am planning on using his body to make a Kurt angle. Also would that Batista body be too short with ryback boots?  Thanks for the pic i didn't know what to look for when i saw people talking about goof off. |
|
|
|
Post by D.B.K. on Jan 7, 2015 8:39:56 GMT -5
Thanks for the pic i didn't know what to look for when i saw people talking about goof off. no problem. This one works miracles in removing tattoos and other stuff from the figures.(use it in small amounts) |
|
|
|
Post by hellojoeivers on Jan 7, 2015 9:33:04 GMT -5
What other Triple H heads work with the COO mail away body? I have the figure but never cared for the ponytail look, so hoping to give him an Evolution or present day look
Tried the Elite 28 head and it looked ridiculous
|
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 13:59:44 GMT -5
Thanks for the pic i didn't know what to look for when i saw people talking about goof off. no problem. This one works miracles in removing tattoos and other stuff from the figures.(use it in small amounts) Best way to remove tattoos and designs is a fine sand paper from my experience these chemicals mess the figure up if you boil or heat it afterwards. Also these chemicals leave a film where a light sandpaper won't but that's just my opinion. |
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 14:19:23 GMT -5
Sick punk great use of a USO figure
|
|
|
|
Post by D.B.K. on Jan 7, 2015 16:53:52 GMT -5
Lord Steven Regal throwback ( still waiting for the blue bloods coat from Ralph's to arrive)  |
|
|
|
Post by rustyy on Jan 7, 2015 17:03:59 GMT -5
Lord Steven Regal throwback ( still waiting for the blue bloods coat from Ralph's to arrive) Recipe? I was thinking of making one myself but imo he needs to be fatter. |
|
|
|
Post by D.B.K. on Jan 7, 2015 17:42:33 GMT -5
rustyy: the Recipe for lord regal; Jakk's head, elite Barrett torso, elite Bob Orton legs with elite ADR boots and knee pads sorry I really do not remember whose arms did I use - the main thing is that the tape on wrists is white and the skin color matches the torso!
|
|
|
|
Post by JDSFullmetal on Jan 7, 2015 19:51:53 GMT -5
|
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 20:23:58 GMT -5
No idea who that is, but it looks crisp. Closest I could think, was Tara/Victoria... but I'm sure I'm wrong. Either way, great job! |
|
|
|
Post by JDSFullmetal on Jan 7, 2015 20:29:33 GMT -5
No idea who that is, but it looks crisp. Closest I could think, was Tara/Victoria... but I'm sure I'm wrong. Either way, great job! its Tara/Victoria |
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 20:37:27 GMT -5
Looks great, except for the Eve head. Didn't have an RA Victora head to use?
|
|
|
|
Post by JDSFullmetal on Jan 7, 2015 20:39:22 GMT -5
it looks more like her in person.
|
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Jan 7, 2015 21:52:43 GMT -5
no problem. This one works miracles in removing tattoos and other stuff from the figures.(use it in small amounts) Best way to remove tattoos and designs is a fine sand paper from my experience these chemicals mess the figure up if you boil or heat it afterwards. Also these chemicals leave a film where a light sandpaper won't but that's just my opinion. How many grits sandpaper do you use? I have tried using sandpaper but that makes it being dull. |
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 22:06:49 GMT -5
Best way to remove tattoos and designs is a fine sand paper from my experience these chemicals mess the figure up if you boil or heat it afterwards. Also these chemicals leave a film where a light sandpaper won't but that's just my opinion. How many grits sandpaper do you use? I have tried using sandpaper but that makes it being dull. I use a few I usually start coarse like 150 cause it works fast then I go over it with 320 or finer and wipe it with a cloth and the shine is back on the rubber/soft plastic like arms I use acetone but on the harder plastic I prefer sanding also after I acetone the arms I use a fine same paper and make sure I have it all off. This also works well for getting stains out like the red stains the volkoff jacket caused to the arms. Hope this helps |
|
n2jib
Main Eventer
Joined on: Mar 2, 2012 11:01:59 GMT -5
Posts: 1,546
|
Post by n2jib on Jan 7, 2015 22:10:18 GMT -5
How many grits sandpaper do you use? I have tried using sandpaper but that makes it being dull. I use a few I usually start coarse like 150 cause it works fast then I go over it with 320 or finer and wipe it with a cloth and the shine is back on the rubber/soft plastic like arms I use acetone but on the harder plastic I prefer sanding also after I acetone the arms I use a fine same paper and make sure I have it all off. This also works well for getting stains out like the red stains the volkoff jacket caused to the arms. Hope this helps Thanks for the explaination, i'll try to do it again using this method. |
|
Deleted
Joined on: Nov 16, 2024 2:18:48 GMT -5
Posts: 0
|
Post by Deleted on Jan 7, 2015 22:15:09 GMT -5
I use a few I usually start coarse like 150 cause it works fast then I go over it with 320 or finer and wipe it with a cloth and the shine is back on the rubber/soft plastic like arms I use acetone but on the harder plastic I prefer sanding also after I acetone the arms I use a fine same paper and make sure I have it all off. This also works well for getting stains out like the red stains the volkoff jacket caused to the arms. Hope this helps Thanks for the explaination, i'll try to do it again using this method. No problem glad I could help |
|
