RoguePwnz93
Mid-Carder
"You will Never EEEEEEVVVVEEERRRRR Be The Same Again"
Joined on: Sept 17, 2011 19:58:45 GMT -5
Posts: 320
|
Post by RoguePwnz93 on Dec 13, 2011 14:30:06 GMT -5
|
|
|
|
Post by kjtoys on Dec 13, 2011 14:43:09 GMT -5
looks like you didnt get them on right. that last pics shows them lifting off..
|
|
RoguePwnz93
Mid-Carder
"You will Never EEEEEEVVVVEEERRRRR Be The Same Again"
Joined on: Sept 17, 2011 19:58:45 GMT -5
Posts: 320
|
Post by RoguePwnz93 on Dec 13, 2011 14:43:39 GMT -5
Yeah I know i had a really hard time.  |
|
|
|
Post by Bandalero on Dec 13, 2011 14:44:17 GMT -5
and they're on the wrong shoulders unless you took the pic in a mirror  |
|
RoguePwnz93
Mid-Carder
"You will Never EEEEEEVVVVEEERRRRR Be The Same Again"
Joined on: Sept 17, 2011 19:58:45 GMT -5
Posts: 320
|
Post by RoguePwnz93 on Dec 13, 2011 14:46:22 GMT -5
and they're on the wrong shoulders unless you took the pic in a mirror No they are on right its just my webcam takes pics backwards. |
|
dro310
Superstar
29 refs here, plenty on ebay (600+) all wwe and other figures
Joined on: Jan 23, 2006 23:58:34 GMT -5
Posts: 757
|
Post by dro310 on Dec 13, 2011 16:01:46 GMT -5
can i see closer look at chest tat, did dean change the chest tat?
|
|
RoguePwnz93
Mid-Carder
"You will Never EEEEEEVVVVEEERRRRR Be The Same Again"
Joined on: Sept 17, 2011 19:58:45 GMT -5
Posts: 320
|
Post by RoguePwnz93 on Dec 13, 2011 16:58:39 GMT -5
Yeah i can but my regular camera has really bad quality. I can't believe this either the pepsi and the cobra tats both came off and now i have none on both figures, they didn't stick and dry. Oh well i wasted money because i didn't know how to apply them on *sighs*at least the chest came out good. |
|
Roadie Codes
Superstar
Joined on: Nov 9, 2011 15:59:47 GMT -5
Posts: 678 
|
Post by Roadie Codes on Dec 13, 2011 18:05:10 GMT -5
Dean will make this right. You failed bro.
|
|
RoguePwnz93
Mid-Carder
"You will Never EEEEEEVVVVEEERRRRR Be The Same Again"
Joined on: Sept 17, 2011 19:58:45 GMT -5
Posts: 320
|
Post by RoguePwnz93 on Dec 13, 2011 18:09:42 GMT -5
I know i really did I have horrible luck with stickers and decals. |
|
|
|
Post by MachoManiac on Dec 13, 2011 20:34:45 GMT -5
its ok brother.. i'm bad with my hands too!!... that Why we'll never make it past the 5th date!
|
|
niron178
Mid-Carder
WHO's NEXT
Joined on: Nov 22, 2011 20:03:43 GMT -5
Posts: 292
|
Post by niron178 on Dec 13, 2011 20:38:29 GMT -5
its ok brother.. i'm bad with my hands too!!... that Why we'll never make it past the 5th date! Nice one macho... Me too i'm really bad with my hands too.... |
|
polarpenguin14
Mid-Carder
Joined on: Oct 2, 2011 4:33:27 GMT -5
Posts: 248
|
Post by polarpenguin14 on Dec 14, 2011 8:35:19 GMT -5
It's okay man. I'm so bad with stickers I don't even dare attempt anything with my one and only E6 CM Punk..
|
|
|
|
Post by Bandalero on Dec 14, 2011 9:58:23 GMT -5
when Dean helps you out of your predicament, try this:
1. Cut the decal out from the sheet as close as possible to the design.
2. Soak in warm water for about 20-30 seconds
3. Use tweezers to pull the decal off the white backing paper while still in the water
4. Apply directly to the shoulder of the figure with the tweezers
5. Waterslide decals don't bond instantly so you actually have a minute or so to position the decal properly or as best you can
6. *** Top Secret *** damp a soft cloth with warm-hot water and use this to press the decal on when it's in position. the hotness of the cloth helps smooth out the bubbles/wrinkles and keeps the decal moist enough to move around and form to the contours of the figure (like the spherical shoulder piece).
7. Let dry for a while and then apply clear nail polish over it to prevent scratching.
Trust me I screwed up on my first set of decals too, but the above method works for me every time.
|
|
