|
|
Post by Lewscher on Mar 30, 2012 8:57:48 GMT -5
so basically it took 3 days work. 1 I built the base, 2 i did the posts, and 3 i sewed it all up. I used a WM2 RSR skirt, cut it up and used the CSDA skirts to replace them. (i need one more WMXIX skirt cheap in the uk) while im at it a new FM hhh, matt hardy, christian and stone cold are on the want list too. Out of all the rings ive made, this was the best done, fully scaled and the ring post design done realistically. So any questions just ask, and comments/constructive criticism is welcom too. *if pic is too big ill keep to the links, just say and ill edit the post.      |
|
|
|
Post by jpsp98 "THE XBLKID" Toasty on Mar 30, 2012 17:17:36 GMT -5
very good
|
|
Deleted
Joined on: Jun 27, 2024 19:41:34 GMT -5
Posts: 0
|
Post by Deleted on Mar 30, 2012 19:50:33 GMT -5
what do you use what i mean is to build the base the post
|
|
|
|
Post by pxkgotosleep on Mar 30, 2012 19:53:28 GMT -5
Bad ass! Great job!
|
|
|
|
Post by Lewscher on Mar 31, 2012 3:34:55 GMT -5
what do you use what i mean is to build the base the post L shaped brackets  the origional idea was to use these, 'half screw / half bolts' I found, but i couldnt find nuts to fit. so i ended up using bolts straight through the post. |
|
|
|
Post by wwextreme25 on Mar 31, 2012 4:55:06 GMT -5
kickass job i made my own custom ring aswel haha i have that jeff hardy figure aswell |
|
|
|
Post by danmorganbrand on Mar 31, 2012 5:33:59 GMT -5
WOW! That's awesome! Do you have any pics of your other rings?
|
|
|
|
Post by Lewscher on Mar 31, 2012 6:24:14 GMT -5
WOW! That's awesome! Do you have any pics of your other rings? sadly most have been destroyed. I only have my uncomplete TNA ring left, ill dig it out and post pics. |
|
|
|
Post by Lewscher on Mar 31, 2012 6:43:11 GMT -5
all TNA guys except both ravens are still for sale/trade. I'm going to make this tna ring my next project, all i have planned is to paint the posts black so far. previous rings (like this) i used blocks underneath the base. this WM XIX ring is the first to look real. and worked good i must say   [glow=red,2,300] just painted posts[/glow]  Also this was a start at converting a HIAC ring i found, into a restoration project, again this ones in the loft.   |
|
|
|
Post by jpsp98 "THE XBLKID" Toasty on Mar 31, 2012 21:20:39 GMT -5
what is the height to the floor to the canvas???
|
|
|
|
Post by Lewscher on Apr 1, 2012 4:41:48 GMT -5
what is the height to the floor to the canvas??? 10-10.5cm, not sure which, its just a little too high i feel so i may (very carefully) trim them down. As for the tna ring i dont know and its back in the loft now. |
|
|
|
Post by jpsp98 "THE XBLKID" Toasty on Apr 1, 2012 13:46:27 GMT -5
ok thanks
|
|
|
|
Post by -The Autistic Animator- w.S.e on Apr 11, 2012 1:20:09 GMT -5
How Did You Make The 18 Inch RSR
|
|
|
|
Post by Lewscher on Apr 11, 2012 6:30:40 GMT -5
How Did You Make The 18 Inch RSR looks simple enough from the pics? |
|
|
|
Post by -The Autistic Animator- w.S.e on Apr 12, 2012 4:27:32 GMT -5
Need Words And What Are The Measurements For The Posts
|
|
|
|
Post by Lewscher on Apr 12, 2012 12:31:10 GMT -5
image is from another users post he pm'd me, its an 18" ring i did, most rsr's are 20". my plywood base was thicker so i accomodated for it where the base is in the image.
Anything else is self explanatory, drill holes, use nuts bolts and washers with the L brackets.
if you have a set square it helps with aligning it properly on thew base if you dont have a ruler long enough to draw an edge to edge 'x', this way your posts dont end up to the side of the ring or anything.
|
|
|
|
Post by soundwave on Apr 22, 2012 4:36:53 GMT -5
image is from another users post he pm'd me, its an 18" ring i did, most rsr's are 20". my plywood base was thicker so i accomodated for it where the base is in the image. Anything else is self explanatory, drill holes, use nuts bolts and washers with the L brackets. if you have a set square it helps with aligning it properly on thew base if you dont have a ruler long enough to draw an edge to edge 'x', this way your posts dont end up to the side of the ring or anything. Nice ring, and yes, that pic from your last post is from rowie4life, i think  |
|
