Ryan81398
Main Eventer
This is my life now.
Joined on: Jan 17, 2013 21:15:57 GMT -5
Posts: 1,834
|
Post by Ryan81398 on Apr 29, 2015 17:13:19 GMT -5
Going to ask here before I start scouring the depths of the internet some more. I'm looking for uncommon 1/64s of these cars: 2007-2011 Sprint Cup COTs (Winged) Pre-COT NNS Cars Trucks Red Bull cars If you have any of those and would be willing to sell/trade, please PM me. I'm hoping to do some stop motions, and getting a full field with the easy find cars is pretty hard. Thanks. woahwoahwoahwoah you do stop motions? I've had the idea to do one for a while. I did one for a school project a couple of years ago and want to do more. The only problem is that I don't have a lot of space, so I have to go somewhere else to do them. |
|
|
|
Post by JC Motors on Apr 30, 2015 15:13:43 GMT -5
Last Trent Barreta Fan, have you ever heard about or seen the Brickyard 400 Inaugural Race support team vehicles? I believe there was a Chevrolet Suburban, a 5th wheel pickup truck and a War Wagon. They were all 1:24 scale banks. Johnny Lightning made a 1:64 scale track emergency vehicle   I think The Brickyard 400 has the most obscure commemorative diecasts out of any race
|
|
Kyle
Main Eventer
Joined on: Jun 18, 2008 22:51:03 GMT -5
Posts: 1,485
|
Post by Kyle on May 2, 2015 14:22:31 GMT -5
Last Trent Barreta Fan, have you ever heard about or seen the Brickyard 400 Inaugural Race support team vehicles? I believe there was a Chevrolet Suburban, a 5th wheel pickup truck and a War Wagon. They were all 1:24 scale banks. Johnny Lightning made a 1:64 scale track emergency vehicle I think The Brickyard 400 has the most obscure commemorative diecasts out of any race Never seen those, but I think I have a Revell Pontiac grand prix I got from Roses in 1995. |
|
|
|
Post by Last Trent Barreta Fan on May 2, 2015 14:36:27 GMT -5
Last Trent Barreta Fan, have you ever heard about or seen the Brickyard 400 Inaugural Race support team vehicles? I believe there was a Chevrolet Suburban, a 5th wheel pickup truck and a War Wagon. They were all 1:24 scale banks. Johnny Lightning made a 1:64 scale track emergency vehicle I think The Brickyard 400 has the most obscure commemorative diecasts out of any race I have the jet dryer |
|
Kyle
Main Eventer
Joined on: Jun 18, 2008 22:51:03 GMT -5
Posts: 1,485
|
Post by Kyle on May 3, 2015 9:08:34 GMT -5
Anybody got a 2007 Vickers 1/24 cot they want to part with?
|
|
|
|
Post by JC Motors on May 3, 2015 16:34:58 GMT -5
Last Trent Barreta Fan, I meant to post this for awhile. I have a very obscure Limited Edition of 5,000 Racing Champions Goodyear Tires Platinum plated Craftsman Truck Series 1:24. It was given to me from a family friend who owns a tire dealer. I never opened it. It's in a huge box and I never saw another one like it. The truck is form 2001. Do you have any info on it?
|
|
|
|
Post by Last Trent Barreta Fan on May 3, 2015 16:39:25 GMT -5
Last Trent Barreta Fan, I meant to post this for awhile. I have a very obscure Limited Edition of 5,000 Racing Champions Goodyear Tires Platinum plated Craftsman Truck Series 1:24. It was given to me from a family friend who owns a tire dealer. I never opened it. It's in a huge box and I never saw another one like it. The truck is form 2001. Do you have any info on it? Can you post a pic |
|
|
|
Post by JC Motors on May 3, 2015 18:21:05 GMT -5
Last Trent Barreta Fan, I meant to post this for awhile. I have a very obscure Limited Edition of 5,000 Racing Champions Goodyear Tires Platinum plated Craftsman Truck Series 1:24. It was given to me from a family friend who owns a tire dealer. I never opened it. It's in a huge box and I never saw another one like it. The truck is form 2001. Do you have any info on it? Can you post a pic  |
|
|
|
Post by Last Trent Barreta Fan on May 3, 2015 19:05:51 GMT -5
Oh cool never seen that before
|
|
|
|
Post by SodaGuy on May 3, 2015 19:06:38 GMT -5
Finally got a good deal on Kyle's 2006 Ice Age 2 1:64. $12.95 shipped   |
|
|
|
Post by JC Motors on May 4, 2015 7:12:04 GMT -5
Finally got a good deal on Kyle's 2006 Ice Age 2 1:64. $12.95 shipped How much does it usually go for? |
|
|
|
Post by SodaGuy on May 4, 2015 10:44:07 GMT -5
Finally got a good deal on Kyle's 2006 Ice Age 2 1:64. $12.95 shipped How much does it usually go for? The last one I watched back in March went for $34.00 + shipping. |
|
Kyle
Main Eventer
Joined on: Jun 18, 2008 22:51:03 GMT -5
Posts: 1,485
|
Post by Kyle on May 4, 2015 11:53:20 GMT -5
 Any body else make customs? This was the last one I made a few years ago. |
|
|
|
Post by JC Motors on May 4, 2015 15:14:02 GMT -5
How much does it usually go for? The last one I watched back in March went for $34.00 + shipping. That's insane. How rare is it? |
|
Kyle
Main Eventer
Joined on: Jun 18, 2008 22:51:03 GMT -5
Posts: 1,485
|
Post by Kyle on May 9, 2015 21:40:27 GMT -5
Picked up the Dale Jr Michael Baker and Keselowski spinmaster cars at target yesterday. Found the JR 1/64 Nationwide car at Bass Pro too. Not a bad day.
|
|
|
|
Post by Last Trent Barreta Fan on May 9, 2015 21:55:07 GMT -5
Bought a 2009 #02 Farm Bureau Toyota to keep MOC for $20, also bought both 2007 Red Bull COY 1:64s for $10 loose. Should be coming next week, depending on when they send them.
|
|
|
|
Post by Nivro™ on May 9, 2015 22:05:28 GMT -5
Any body else make customs? This was the last one I made a few years ago. That looks awesome...I want to make a 1/64th scale custom with my own personal # sponsors etc but I wouldnt know where to start honestly |
|
Kyle
Main Eventer
Joined on: Jun 18, 2008 22:51:03 GMT -5
Posts: 1,485
|
Post by Kyle on May 9, 2015 22:23:41 GMT -5
Any body else make customs? This was the last one I made a few years ago. That looks awesome...I want to make a 1/64th scale custom with my own personal # sponsors etc but I wouldnt know where to start honestly Best advice I can give you is... Don't. Customizing is difficult, expensive, and ridiculously time consuming. If you have the patience and time though, go for it. This car took me well over a month. The hardest part is the decals. Finding them and learning to use water slide decals sucks. They're so fragile. I've only ever done 1/24 cars so each one has about $90 worth of supplies invested in each. $35-40 for correct make and model car $25-35 for decals $10-20 in paint $5 in clear coat $5 in brushes It'll be a lot cheaper with a 1/64, obviously. Still incredibly time consuming. |
|
|
|
Post by Last Trent Barreta Fan on May 9, 2015 22:30:05 GMT -5
Any body else make customs? This was the last one I made a few years ago. That looks awesome...I want to make a 1/64th scale custom with my own personal # sponsors etc but I wouldnt know where to start honestly They usually run about $25 and depending on the maker can be really good. I've bought two custom 1:64s in my collection.   The 23 was cheaper than the 04 but it looks SO much better. These are pretty good custom makers on Facebook. I would avoid Redline Designz because although they have a great website, they get overworked, lose orders or ignore orders completely. They pretty much pick and choose who they do. They've been banned from a few Facebook groups, as well as Diecast Crazy. CBC CustomzKVK3 Custom DiecastFinishline Customs |
|
|
|
Post by Nivro™ on May 9, 2015 22:31:41 GMT -5
That looks awesome...I want to make a 1/64th scale custom with my own personal # sponsors etc but I wouldnt know where to start honestly Best advice I can give you is... Don't. Customizing is difficult, expensive, and ridiculously time consuming. If you have the patience and time though, go for it. This car took me well over a month. The hardest part is the decals. Finding them and learning to use water slide decals sucks. They're so fragile. I've only ever done 1/24 cars so each one has about $90 worth of supplies invested in each. $35-40 for correct make and model car $25-35 for decals $10-20 in paint $5 in clear coat $5 in brushes It'll be a lot cheaper with a 1/64, obviously. Still incredibly time consuming. I feel ya there...I think the hardest part would be the decals on a small ass car. I did a few model cars when I was younger, Dale Sr, Tim Richmond, Brett Bodine etc and those were fairly easy....something that small would be a bitch |
|
