anglefan80
Main Eventer
Joined on: Nov 17, 2011 22:56:51 GMT -5
Posts: 1,416
|
Post by anglefan80 on Nov 30, 2013 23:51:10 GMT -5
Has anyone successfully taken off Ambrose's vest without having to cut it?
|
|
|
|
Post by Justin on Nov 30, 2013 23:52:22 GMT -5
There is no way to take it off without cutting.... I guess you could remove the shoulder and the arms, then pull the vest but I see that being very difficult
|
|
|
|
Post by cableV on Dec 1, 2013 0:02:06 GMT -5
|
|
|
|
Post by joes7164 on Dec 1, 2013 0:03:04 GMT -5
I have actually done this just a couple days ago. Take the arms off, heat the figure/vest in very hot water (I usually heat water in the microwave for 1:30-2:00 minutes) and pull the vest over the shoulders. worked for me...
|
|
anglefan80
Main Eventer
Joined on: Nov 17, 2011 22:56:51 GMT -5
Posts: 1,416
|
Post by anglefan80 on Dec 1, 2013 0:23:07 GMT -5
I have actually done this just a couple days ago. Take the arms off, heat the figure/vest in very hot water (I usually heat water in the microwave for 1:30-2:00 minutes) and pull the vest over the shoulders. worked for me... Thats the route I was taking, but it wasnt working for me. However, knowing that it worked for someone else, I kept at it and got the vest off! Thanks! |
|
|
|
Post by joes7164 on Dec 1, 2013 7:33:05 GMT -5
Awesome! Glad I could help!
|
|
|
|
Post by MrPerfect25 on Dec 1, 2013 9:00:34 GMT -5
It was a lot easier than I thought it would be. I didn't even heat mine. Just took an exacto/hobby knife along the "T" seam and it came off super clean. Just becareful not the scratch up the black torso underneath. But the vest is saved and can be used again.
|
|
#SHOWOFF
Superstar
Joined on: Sept 6, 2011 17:08:42 GMT -5
Posts: 974
|
Post by #SHOWOFF on Dec 1, 2013 11:31:41 GMT -5
I was able to heat mine using a hair dryer and it peeled off on the t shaped line in the back.
|
|
seanses
Mid-Carder
Joined on: Jun 17, 2011 19:09:02 GMT -5
Posts: 178
|
Post by seanses on Dec 2, 2013 8:46:32 GMT -5
I cut mine off but there's a small glue stain on the back of the figure, it's not a major issue if it's just on display
|
|
Deleted
Joined on: Sept 21, 2024 11:51:55 GMT -5
Posts: 0
|
Post by Deleted on Dec 2, 2013 10:11:27 GMT -5
I don't plan on taking mines vest off. Because I want it to look just like the other members and who knows we may get a vest less Dean figure soon , with the way that their realesing these Shield figures.
|
|
|
|
Post by Jericho Is God!™ on Dec 2, 2013 10:24:50 GMT -5
its glued together I just pulled it apart at the glued bits and I got it off and its still all in working order
|
|
