/Tutorial\ Custom Scale Ring

Needs:
+Wood
+Drill
+Screws
+Tape Measure
+T-Shirt(Optional)
+Saw

STEP 1
Firstly, take a sheet of wood. Saw it straight (You can use pencil for the lines) for the dimensions you want as you can make any size of ring this way. There, after thats cut, you have your canvas base.

STEP 2
Take the left over pieces that you cut your base out of and design a frame. You can just prop it up or whatever you want. Drill the frame together, but make sure it is the same size as your base leaving a little bit of wood hanging out on each corners. This is where the turnbuckles will be.

STEP 3
Put a T-Shirt or a real ring mat over the base. Tuck it in good so nothing hangs over. Then drill that to your frame so it won't come off.

STEP 4
With the extra wood hanging over from the frame, Saw out 4 turnbuckles anyway you like, then drill them to the frame.

STEP 5 (optional)
Buy small J Hooks
and put them in the turnbuckles. You will need 12 of these. Put your ring rope in these and it will end up like a ring!

OR

STEP 6
Just wrap the rope around the turnbuckles, Like I did.


This is my finished outcome without J Hooks.