|
|
Post by cenasfan on Jun 20, 2006 18:10:51 GMT -5
um ok i think ug u take a flat head screwdriver and put it in the joint were the knee conects and on each side pop it up and it should come lose from the leg with half the peg in the leg still and u should just pull it off karma?
|
|
becca
Main Eventer
Joined on: Dec 13, 2005 11:20:18 GMT -5
Posts: 4,042
|
Post by becca on Jun 21, 2006 0:44:06 GMT -5
If you boil it, it will get really soft and you can just kind of pull it off. Or you can pop the pin out. Putting them back on is the tricky part.
|
|
|
|
Post by Raoul the Great on Jun 21, 2006 1:13:31 GMT -5
If you boil it, it will get really soft and you can just kind of pull it off. Or you can pop the pin out. Putting them back on is the tricky part. Once I have the pin in place, I bite down on it to fit the pin back into the joint. I bite lightly so I don't leave marks. |
|
Deleted
Joined on: Nov 24, 2024 15:32:45 GMT -5
Posts: 0
|
Post by Deleted on Jun 21, 2006 17:21:10 GMT -5
I don't boil. I use a hairdryer. I find it easier, IMO.
|
|
