Sami Hazard
Main Eventer
I don't answer to a higher power, I am a higher power.
Joined on: Mar 17, 2006 18:27:17 GMT -5
Posts: 3,390
|
Post by Sami Hazard on Jul 22, 2006 10:50:48 GMT -5
I need help putting on the HIAC Orton head on the Backlaash Orton (the one w/ Evolution shirt)
And putting an RA11 Taker head on HIAC Taker body
What do I do? Please help.
|
|
Deleted
Joined on: Nov 25, 2024 0:11:46 GMT -5
Posts: 0
|
Post by Deleted on Jul 22, 2006 11:42:43 GMT -5
Heat up the heads with a hair dryer. Remove. While the heads still have that rubbery feel to them, pop them on the other body.
|
|
Sami Hazard
Main Eventer
I don't answer to a higher power, I am a higher power.
Joined on: Mar 17, 2006 18:27:17 GMT -5
Posts: 3,390
|
Post by Sami Hazard on Jul 22, 2006 14:43:43 GMT -5
It didn't work
|
|
|
|
Post by Kenny Powers on Jul 22, 2006 16:26:58 GMT -5
Just pull on the heads straight up really hard. They will pop off. Either that or boil them in water for 30-40 seconds and the head will pop off really easy. Boiling won't hurt the figure at all.
|
|
Sami Hazard
Main Eventer
I don't answer to a higher power, I am a higher power.
Joined on: Mar 17, 2006 18:27:17 GMT -5
Posts: 3,390
|
Post by Sami Hazard on Jul 22, 2006 17:32:06 GMT -5
I need to get tem on, I have a feeling the peg is to big for the hole, but I could be wrong.
|
|
|
|
Post by Kenny Powers on Jul 22, 2006 17:47:21 GMT -5
If they are all Ruthless Aggression figures they will fit.
The figs you described are all Ruthless Aggression.
|
|
|
|
Post by Mr. McCluer on Jul 22, 2006 17:47:40 GMT -5
or just rip the damn thing off
place the head between your index finger and middle finger and pull
|
|
Deleted
Joined on: Nov 25, 2024 0:11:46 GMT -5
Posts: 0
|
Post by Deleted on Jul 23, 2006 10:08:46 GMT -5
You probably didn't heat up the heads long enough. Sometimes you might have to heat up the heads before putting them on the new body (even after taking the off the old body). Trust me, it works. Have been doing it for over a year. |
|
|
|
Post by trick13 on Jul 23, 2006 13:10:46 GMT -5
or you could place your thumb or a flathead screwdriver underneath the chin of the figure's head and press up.
|
|
|
|
Post by thegame727 on Jul 24, 2006 12:23:13 GMT -5
You can put the chin of the head on a cornrer of a computer desk or table and it will pop off.
|
|
|
|
Post by Nick Maniwa on Jul 24, 2006 12:38:28 GMT -5
You could crack the top of the torso a little bit with a flathead, that might be easier.
|
|
|
|
Post by Mr. McCluer on Jul 25, 2006 10:20:38 GMT -5
or just rip it off
|
|
|
|
Post by wwe4ever on Jul 25, 2006 11:06:27 GMT -5
pull it off with your hands. trust me it works.
|
|
|
|
Post by Mr. McCluer on Jul 25, 2006 13:59:25 GMT -5
pull it off with your hands. trust me it works. thats what i said |
|
|
|
Post by The Canadian Killer Deen on Jul 25, 2006 16:50:33 GMT -5
take a small flat end screwdriver and put the flat end shove it under the head by the space in beetween the neck and head and use the screwdriver as a lever and the head will pop off to put the head on another body boil the head for 2 mins and then take the head and pop it in the torso
|
|
